Medical Accessories Dealers in Chennai

The HI 98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation. The Checktemp® offers NO breakage, NO waste, NO injuries and NO difficulty in reading; the digital display prevents a parallax error (observing the wrong measurement due to the angle of view) and is optimized for a wide range of environmental temperatures. Checktemp® is provided with Hanna’s unique CAL Check™ function for accurate measurements every time. The Checktemp® implements a CAL Check™ upon startup and reports the status as 0 or Err. The sharp-tip probe of the Checktemp® easily penetrates semi-solid products making routine temperature checks simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements. Features at-a-glance: ±0.2°C (±0.5°F) - Accuracy Most accurate temperature tester in the world CAL Check™ - Automatically verifies calibration at startup °C/°F Status – User selectable Large display with wide environmental temperature range and viewing angle. IP 65 water resistant protection HACCP Compatible - Use as a tool for control in HACCP analysis AISI 316 stainless steel penetration Probe 3000 hours of battery life (Continuous use) Auto-Off (select from 8 min., 60 min., or turn the feature off)

MAX/MIN ALARM THERMOMETER:Indoor/Outdoor Fridge/Freezer thermometer Sensor mounted in an unbreakable plastic bottle, filled with Ethylene glycol mixture Supplied with instructions and Certified temperature.

We offer infra red thermometer. • non-contact for hygenic, non-intrusive use• 3 modes to take the bodysurfaceroom temperature.• fever alarm will alert you to a temperature of over 38.0 degrees c• last 32 readings are stored in memory• backlit lcd screen, easy to read in a dark room.• temperature displayed in either fahrenheit or celsius.• small and convenient to use.• human body temperature measurement 32°c to 42.9°c. (90°f to 109°f )• uses ordinary aa batteries

We are offering nebulizer. A highly effective, fda-approved compression nebulizer delivering smaller particles of respiratory medicine. displacement 9 lpm @ 0 kg/cm2 power (max. Watts) 80 sound levels (dba) ≤62 neb pressure 75 kpa (0.750 bar) weight (kg) 1.56 size (lxwxh) 250 x 120 x 170mm cord length (m) 1.5 electrical requirements 115v±10%/60hz or 220v/50hz or 230v/60hz service-free life 3 years.

   Insulin dependent diabetes (type 1) who measure blood sugar level 3-6 times a day can gather a small amount of blood and measure their blood sugar level in a short time. We intend to provide the convenience of managing diabetes, which is being recognized as serious disease in the society, by manufacturing and distributing small and slim blood sugar measuring device that is easy to carry and use regardless of places.   ◈ Measure blood sugar level in a short time with a small amount of blood     The device absorbs 0.5 ㎕ of blood into the most advanced blood sugar sensor strip and measures the blood sugar level in 5 seconds by using electrochemical method.   ◈ Perform with small and slim device   Such accurate and fast blood sugar measurement can be performed by the credit card type smalll and slim device. The device weighs 40g so that it can be carried and used easily regardless of places.   ◈ Convenient Use   The credit card type device has a big LCD display that indicates blood sugar level with big numbers in order for the older diabetes to use it conveniently, and blood sugar measurement can be performed and saved data information can be checked easily by pressing the button.       ◈ Blood Measuring Part   Strip Connector Connector that collects the electric signal about electrochemical blood sugar measurement reacted at strip and transmits it to calculation circuit.   Blood sugar measurement sensor Strip Sensor strip that converts the electrochemical signal that is generated through the reaction between 0.5㎕ of blood and chemical inductiion material contained in electrochemical sensor into electric signal and blood sugar value in turn.   ① Working Electrode(E1) - Main part that is in charge of measurement ② Counter Electrode(C) - Supplementary electrode for the measurement standard of E1 and E2 ③ Third Electrode(E2) - Sub part that measures blood fluidity   ◈ MCU(Texas Instrument Mixed Signal Microcontroller)   - Embedded with system control program - Embedded with blood sugar level measurement and calculation algorism program - Embedded with LCD display and button control program   ① Screen: Measurement result display area ② Date/Time: Month-day-time: minute display ③ Code: Appear when strip code number is displayed ④ mem: Appear when stored result is displayed ⑤ Avg: Appear when average Value is displayed ⑥ Check: Appear when measuring device is checked ⑦ SET: Appear when category is set ⑧ Battery: Appear when battery needs to be replaced ⑨ Blood Insertion: Appear when blood needs to be inserted into strip ⑩ mmol/L: Blood sugar measurement display unit (used by some countries including China, unit that is not used in Korea) ⑪ mg/dL: Blood sugar measurement display unit ⑫ Decimal point: Appear when measurement unit is set for mmol/L   ◈ PC Connector   Connector that transmits blood sugar measurement data to PC

Thermometer along with stainless steel sensor Probe Measure Temperature -50.0 to 199.9 °C…300°C ( -58 to 572 ° F) , 1 sec normal Temperature sensing time Auto Resolution and Unit °C/°F Selectable 3 ½ Digit liquid crystal display ( LCD) with Maximum Display Reading of 1999 counts Standard 9 VDC battery , 200 Hours Battery Life Hold/ max /min, on/Off, hi/low alarm switches Water proof with 1.5 VDC battery operated Auto power off and low batter indication

Product Description   • Place finger for immediate measure of hemoglobin saturation• Also displays Sp02, PR, PI, Pulse bar and Plethysmogram• Small in size and lightweight for easy carrying• Low power consumption can work more than 30-hours continuously• For hospital, home, medical treatment, sport healthcare use• Adjustable brightness and dual colour OLED display with 6 modes• Audible and visual alarm along with adjustable brightness.  

We offer Every Angle Dial Thermometers. Dial size : 63, 100, 150 mm Case : Pressed Steel Chrome plated or SS Mounting : All Every Angle, 180 deg. Rotation Bulb & Stem : 2",3",6",9",12", std. To upto 48" long Connection : 12" BSP(M) or as required Bulb, Stem & Connection Material : M.S Chrome plated or SS Stem dia : 14", 38" or as required Range : -25 to 60C to upto 600C Accuracy : +- 1.5% FSD

once again raising the technology bar, the radical-7 leverages masimo’s breakthrough noninvasive measurements with a radical departure from traditional monitoring for breakthrough functionality designed to automate the process of care and enable clinicians to instantly adapt to changing monitoring needs in individual patients and care areas.breakthrough measurementsthe radical-7's upgradable rainbow set® platform features noninvasive and continuous monitoring of: total hemoglobin (sphb®), oxygen content (spoc™), carboxyhemoglobin (spco®), and methemoglobin (spmet®) masimo set® measure-through motion and low perfusion pulse oximetry for oxygen saturation (spo2), pulse rate, perfusion index, and pleth variability index (pvi®). respiration rate through either a novel acoustic sensor (rra™) or through the plethysmograph waveform (rrp™)*    .

The new HRV Acquire cardiac testing lab provides support in the testing and evaluation of patients in the areas of cardiovagal function. With the addition of an optional beat-to-beat continuous blood pressure monitor, the system provides adrenergic information, and several other valuable tests are then available for analysis. • Heart rate response to deep breathing (HRDB), using either ECG or R-R interval  • Valsalva Maneuver, using either ECG or R-R interval  • Head-up Tilt (Requires optional Tilt Table)  • E:I Ratio  • Cardiovagal and Adrenergic Analysis (BRS_A1 Method) • Patient testing can be completed in as little as 15 minutes. • Testing is non-invasive, standardized, and easy to perform for both patient and technician. • Add the WR Tilt Table, Q-Sweat, Beat-to-Beat BP or CASE IV for increased functionality.