Power Analyzer Dealers in Chennai

• Brand Name: FLUKE
• Feature: 3 PHASE
• Usage/Application: POWER ANALYSIS
• Brand: FLUKE

The PPA1500 Power Analyzer offers higher performance than its sibling – the PPA500 unit, the PPA1500 series ensures that N4L power analyzers provide the optimum solution in almost any power measurement application and budget. The main differences between the PPA500 and PPA1500 Power Analyzers are that the PPA1500 features a 1Mhz Bandwidth and full graphical display, this includes harmonic bar graphs and graphical data logging. The PPA1500 Power Analyzers now features sophisticated parallel digital filtering algorithms enabling the PPA1500 to be used in various Pulse Width Modulated applications.

• Brand Name: KRYKARD
• Country of Origin: India
• Color: Yellow

This advanced power quality and energy monitoring solution provides high-definition measurements up to 1000Vrms (AC/DC) with 512 samples per cycle, and captures transients at 1 µs intervals for voltages from 10 to 2000V peak. It features eight channels (4 voltage, 4 current), compliance with IEC and IEEE standards, and intelligent diagnostics with automatic event categorization. Ideal for industrial applications, it includes a 10,000-cycle event buffer and exceeds requirements for transient capture, making it a powerful tool for precise energy monitoring and PQ analysis.

• Brand Name: Sonel
• Usage/Application: Industrial Use
• Model: PQM 711
• Display Type: LCD
• Application: Industrial Use

• Frequency: 50/60 Hz
• Voltage: 100 to 240 V AC
• Temperature: 0-50 DegC
• Display: LCD With Backlight
• External dimension: H240 x W192 x D213 mm
• Output Signal: 4 to 20 mA DC,0 to 1 V DC,0 to 10 m

• Brand Name: ElMeasure
• Port: Bangalore
• Model Number: PD5400
• Operating Temperature: -10°C to 55°C
• Place of Origin: Karnataka, India

• Temperature: RT to 1000C
• Measuring Range: 2000 mg
• Resolution: 0.1ug

• Usage/Application: Laboratory Use
• Brand: Standardel
• Model Name/Number: STD670
• Parameters: 3X220/380V 3X5A 50Hz

• Weight: . 680g (including batteries)
• Model Number/Name: Kew 5050
• Brand: Kyoritsu
• Phase: 3 Phase
• Accuracy: plus minus 0.2%rdg plus minus 0.2%f.s.plus clamp sensor amplitude accuracy
• Interface: SD card (2GB) *standard accessory,USB Ver2.0
• Operating Temperature: - 10 - 50 Deg C
• Comply Range: 10.000/100.00/1000.0mA/10.000A/AUTO
• Dimension: 165(L) x 115(W) x 57(D)mm
• Frequency: 40 - 70Hz
• Functions: Digital output,Print screen,Back light,Data hold
• Display Range: 0.15% - 130% (display "0" for less than 0.15%,"OL" if the range is exceeded)
• Operating Humidity Range: less than 85%RH(without condensation)

Fluke 438-II Power Quality and Motor Analyzer Overview The new Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 430 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. Fluke 434-II, 435-II and 437-II Power Quality Analyzer users can add motor analysis capabilities to their existing units with the Fluke-438-II/MA Motor Analyzer upgrade kit. How it works Using proprietary algorithms, the Fluke 438-II Power Quality and Motor Analyzer uses three-phase current and voltage waveforms to calculate motor torque, speed, load and efficiency at a 1 second update rate. The motor air gap field, as observed via the voltage/current waveforms, provides the basis for the measurements. Mechanical sensors and intrusive no-load motor testing are not required, making it faster than ever to analyze overall electric motor performance. Motor Types The Fluke 438-II can analyze both direct-on-line motors and motors powered by variable frequency drive (VFD) systems. The VFD must be a voltage controlled system (VSI) with a voltage / frequency range of 40 to 70Hz, and a carrier range of 2.5kHz to 20kHz. Electrical motor analysis The Fluke 438-II provides a complete breakdown of electrical parameters. Prior to beginning motor analysis, it's recommended to make base line power quality measurements to assess the state of harmonics and unbalance on the electrical service output as these two properties can have a serious negative impact, on motor performance. When in Motor Analysis mode, results are summarized for electrical performance, mechanical performance and derating (according to NEMA recommendations). The easy to understand four-level color severity scale indicates motor performance in relation to the recommended electrical parameter levels including rated power, power factor, unbalance and harmonics. For mechanical power you can instantly view the mechanical output power along with motor torque and speed. The mechanical output power is instantly compared with electrical power to provide you with live efficiency measurements. With this feature you can easily measure machine performance during each operation cycle. The NEMA derating screen is updated as the load and the electrical conditions change, and each new measurement is plotted on the tolerance graph as a "+". In this example we can see that motor is within tolerance but is close to the service factor. This indicates that there may be a need for power quality mitigation, motor maintenance or some other performance improving adjustment. By frequently performing these tests over time, known benchmarks and performance trends can be created, enabling informed maintenance investment decisions.

• Brand Name: Amprobe
• Features: Easy to operate, Rigid construction , High performance
• Model: Solar 500
• Application: Industrial Use

This system can be used to analyse Thermal Conductivity of Solids, Powders, Pastes or Thin Films This system works out of Hot Wire Method (Transient Hot Wire Method). While the 710 model can also analyse Thin Film the model 700 cannot. Both models would have a 5.7 inch colour LCD display and would have a two-channel RS-232C interface and a USB 2 channel output also. There are many probes to choose from like Box type proble PD-11N, Insulated Moisture-proof probe PD-13N, High Temperature probe PD-31N etc. The probe PD-31N can work from -100 to 1000 Deg C. The Thin film in 710 would be analysed in either a Box type probe or an Insulated Moisture-Proof probe.

Power Analyzer

SPECTANO 100- Dielectric Material Analyzer, Network Analyzer, PMR Power Meter

Power Analyzer

Power Analyzer, Electrical Goods, Analytical Instrument

Krykard Power Quality Analyzer, Power Analyzer, Power Transformer

Thermogravimetric Analyzer, Oxygen Nitrogen Hydrogen Analyzers