Process Controllers Dealers in Tharamani, Chennai

Weight indicator in DIN case, dimensions 96x96x130 mm. IP54 front panel protection (IP65 optional). Four-key membrane keyboard. Eight indicator LED. Possible installations : panel, wall (W200BOX-EC) Six-digit red LED display (14 mm height). RS232 and RS485 pots (Modbus RTU/Laumas ASCII protocol). 3 logic inputs, 5 relay outputs. Optional : Data storage on USB pen drive 16-bit analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V Alibi memory Additional RS485 port Fieldbuses : Profibus DP, DeviceNet, CANopen, Profinet IO, Modbus/TCP,Ethernet/IP, Ethernet TCP/IP for remote management (connectable to yourPC, smartphone, tablet, etc. via web) Certifications : OIML R76:2006, class III, 10000 divisions 0.2 μV/VSI OIML R61 – WELMEC Guide 8.8:2011 (M.I.D.) On request : GOST-R – Russia UL Recognized component – United States and Canada W200 series weight indicator into IP67/IP64 box Polycarbonate box, dimensions 170x140x95 mm, four fixing holes Ø4 mm, 6 PG9 cable glands. Five-key membrane keyboard. Eight indicator LED. Wall mounting. W200BOXEC External switch for formula selection (EC option), Sart and Stop buttons. W200 series weight indicator into explosion proof box The system is composed of: Explosion proof box, ATEX II 2(1) GD approved, provided with heat-resistant transparent tempered glass window and 5 external buttons which performs the same functions as W200 keyboard. W200 series weight indicator. Passive fail-safe Zener barriers, ATEX II (1) GD approved.

• 1.6: 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
• 0.1 µS/cm, 1 µS/cm; 0.01 mS/cm, 0.1 mS/cm: 0.5% f.s.
• automatic, 1 point: automatic or manual from -10 to 100°C with Pt100 probe; β adjustable from 0.00 to 10.00%/°C
• 10.0 to 100.0°C: 0.1 °C
• ±0.5 °C (0 to 70°C); ±1 °C (outside): electromechanical relay SPDT contact output, 5A - 250 VAC, 5A - 30 VDC (resistive load) fuse protected: 5A, 250V, 250V fast fuse
• electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A - 30 VDC (resistive load) (HI211YZ and HI212YZ), fuse protected: 5A, 250V fast fuse: 0-10 VDC, 0-5 VDC or 1-5 VDC; 0-1mA, 0-20 mA or 4-20mA
• RS485: RS 485 baud rate 1200, 2400, 4800 and 9600
• 15 VA: 400 mA, 250V, fast fuse
• Fiber-reinforced, self-extinguishing ABS: II
• four-ring conductivity probe with built-in 3-wire Pt100 temperature sensor or conductivity probe + external Pt100 (not included): LCD
• 230 ±10% VAC: 0-50 °C; RH max 85% non-condensing
• IP54: 221 x 181 x 86 mm (8.7 x 7.1 x 3.4’’)
• 1.6 kg (3.5 lb.): Supplied with instructions.

This instrument is useful for controlling input feeding mechanisms to feed/fill required quantity of material into a tank/hopper/bag. A maximum of 6 material can be batched using this controller, each with coarse/fine feeding. Four opto-isolated digital inputs are provided for controlling the batching process. A high resolution and high speed ADC is used for digitizing the load cell signal and 5000 external counts are provided. RS485 serial communication is provided for interfacing to PC. The instrument operates using 230 V AC SMPS based power supply. All control outputs provided are open collector type and external relays are required for operating feeders. Firmware is provided for calibrating the instrument, for entering the setpoints and other batching parameters, for displaying the cumulative batching data and for communicating with a PC. All batching parameters can also be downloaded directly from the PC and every batch can be monitored and stored in the PC. The PC software is also available as an option.

• Resolution: 0.1 / 1 Degree Celsius
• Accuracy: 0.25 % FS+ 1 digit
• Voltage: 230 VAC
• Frequency: 50 Hz
• Size: 96 x 96 mm
• Temperature Range: K (0 -1200 Degree Celsius), J (0 - 600 Degree Celsius ), RTD ( - 200 - 400 Degree Celsius )
• Country of Origin: Made in India
• Brand: RR Electronics
• Input Type: Fixed
• Controller Type: On/Off Control

The AMFR-904 is an Auto Mani Failure Relay that offers excellent range of engine monitoring and protection features. This microprocessor-based controller includess 8 push-buttons, 19 LED lamps, 3-digits of 7segment LED display, 8 relay outputs, 9 digital inputs, 20 programmable parameters, Hour-meter and 2 operating modes. The module has been designed to monitor engine temperature, low oil pressure, fails to start, fails to stop, charge failure, over speed and under speed.

• Type: Air Shower Controller
• Display Type: Digital
• Automation Grade: Semi-Automatic
• Features: Modern technology, Fine finish, Corrosion resistant
• Power Source: Electric

SC Smartdrive and SC Smartlift represent a quantum leap in crane drive technology. A microprocessor allows the infinitely variable control of hoist, travel and traverse motor speeds by means of a digital frequency and electronic braking module.

Data Loggers, Kerosene Flow Meter, Water Flow Sensor, BASE Diesel Flow Meter

Universal Process Controller, Bellow Valve, Safety Shut Off Valve

motion control, electro mechanical automation products

Digital Temperature Controllers, Micro Switches

motion controllers, Sensor & Temperature Controllers

single loop controller, Impedance Analyser