Anti fouling Coating
850 - 870 Per Litre
4 Litre (MOQ)
Heat Resistant Paint
485 Per Kilogram
1000 Kilogram (MOQ)
Our products are formed under the supervisor of experienced quality control managers utilizing only premium materials and the latest technologies. Buyers can trust us to make delivery of consignments since; we have collaborated with reckoned transportation service providers. Description : Heat Resistant Paint is a 100% acrylic emulsion, heat insulating, anti-carbonation, exterior coating. Uses Protects external surfaces against carbonation and similar environmental attacks. Provides durable and long lasting finish to the external surface. Can withstand extreme climatic changes like heavy rainfall, high humidity and heat reduce the room temperature up to 5 degrees. Advantages A single component liquid that is easily applied by brush. Protects the structures from water leakages or dampness. Prevents rise in internal temperature. Does not peel or crack. Prevents formation of carbonation deposits on the surface, thereby preserves the external surface, increases the total service life of the structure, and thus reduces maintenance cost per year. Prevents formation of fungi and algae hence, exteriors look freshly painted for years. Has UV protection characteristic. Has a fairly good resistance to abrasion due to normal wear and tear. Does not require a priming coat, thus eliminates additional expenses and saves time Directions for Use Surface Preparation & Cleaning : Life and performance is directly dependent on the extent and quality of cleaning. Clean the surface to remove dirt, loose particles, flaking paint, etc. In case of steel surfaces, remove all scales, rust and grease. Examine the surface closely for any cracks or openings. Fill cracks with Walfit –Crack Seal and for specialized cracks use BY WALFIT- DON Waterproofing. Application : Open the container and stir well with a mechanical stirrer to attain uniform consistency. Mix one litre Heat Rsistant Paint with one litre water in a clean container and apply as a priming coat. Following which mix one litre Heat Resistant Paint with 400 ml potable water in a clean container. Stir thoroughly. Apply by brush, roller or spray. Depending on the recommendations, apply two or three coats. Maintain a minimum interval of 4-6 hours between successive coats. Physical and Chemical Properties Appearance : White / pigmented viscous Odou : Slight acrylic odour Specific Gravity : 1.3 ± 0.1 at 25oC pH : 7.0 to 10.00
Best Deals from Special Coating
Berger Chlorinated Rubber Paint
Get Price Quote
Frp Lining
Get Price Quote
FRP Lining for ms tank ,cement tank,All chemical tank frp lining, Anti corrosive frp lining,paint oothlining,cooling tower frp lining Ro plant FRPlining, pp inside outer FRP lining, scrubber Lining,pvc/FRP LIning ,Acid plants,Fertilizers ,sugars plants tanks and ductsFRPLinig, Roof FRP lining
Fire Retardant Paints
200 - 300 Per Litre
30 Litre (MOQ)
High Temperature Ceramic Paste
Get Price Quote
U-V CAC-2 is a two component inorganic water based high temperature resistant (>1500YC) Applications Ideal for bonding, assembling, sealing, joining glass to glass, glass to ceramics, ceramics to metals, ceramics to ceramics, ceramics to quartz and many such bonding applications. Excellent thermal conductivity, electrical and mechanical properties, maximum continuous working temperature 1500'C Can also be used in electrical application such as bonding, potting, encapsulation of electrical heater elements, metal terminal parts, embedding hot plates, resistor elements etc.
Frp Lining
Get Price Quote
Frp lining, We manufacture and supply FRP tanks that are used for chemical’s storage and vessels for chemical reaction. The behavior and the properties of the tanks depend on the grade resins used for fabrication purpose.
Frp Lining
80 - 120 Per Square Feet
200 Square Feet (MOQ)
Since the last 25 years, our organization has been the leading manufacturer of superior range of FRP Lining. With our highly qualified and technically sound team along with State of the art infrastructure, sophisticated manufacturing and sourcing of quality raw material, we are able to fabricate quality products as per International DVS standards. Our vast experience helps us design the system to be most cost efficient. In short, be sure to get "International Quality at Domestic Price !!". Other Details: Tanks have cascade water flow system Rigorous Quality checks are employed before dispatch on all products. Test certificates provided along with dispatch UV Protection, Fire retardancy, Lifting Hooks, Static grounding arrangements Corrosion resistance & Chemical Resistance 100% Leak-proof, Zero Maintenance, High Tensile Strength, Light weight, Sturdy & Excellent finished
Liquid Silicone Rubber
7,553 - 75,530 Per piece
1 piece (MOQ)
Fire Retardant Paint
Get Price Quote
We provide one of the best Fire Retardant Paints for your buildings. With its additional protective layers, the paint swells at high temperatures to provide thermal insulation by creating a porous layer on the metal and between the surfaces. This does not have any odour and is eco-friendly and explosion safe. This provides more than 25 years of protection and is available with us at affordableprices.Titan: Which can be used as a fire retardant coating for all steel structures & concrete interior areas not exposed to weathering & fully preserves the configuration of the treated surface. Description:"Titan" fire-retardant paint is a suspension of heat-resistant, gasforming, foaming additives with inorganic fillers in the dispersion ofPolyacrylates : The paint swells at high temperature to form a thermal insulationporous layer on the metal and beton surfaces. Coating based on fire-retardant paint Titan" with an additional protectivedecorativesurface layer: Thermal insulating porous layer formedafter swelling of the coatings based on fire retardant paint "Titan" after fire exposure. Titan can be used as a Fire retardant coating for all surfaces of Steel structures and Concrete in interior Areas without exposure to weathering.Fire-retardant paint "Titan" is used for the flame-retardant treatment of steel and beton primed structures. Up to 120 minutes fire resistance operating in interior (up to 150 minutes for beton surfaces). For fire protection of steel structures outside on surfaces not exposed to direct rainfall, "Titan" is used with an additional protective and decorative surface finishing. Fully preserves the configuration of the treated surface. Eco clean, non-toxic, fire and explosion safe. No sharp odor. More than 25 years of fire protection.Fire-retardant paint "TITAN" meets the requirements of the Technical Regulations on fire safety requirements (Federal Law of 22.07.2008 â�� 123-FZ), GOST 53295-2009 "Means of fire protection for steel structures."The coating is applied on primed steel structures (columns, beams, overlaps, connections, etc.). Check the condition and quality of previously applied anticorrosion coating, the time of its application. If necessary, repair the corrosion-resistant coating. Use the same materialat the repair (glyptal based anticorrosive primers are recommended) Ambient temperature - min +5 ° C; Relative humidity - 85%; The treated surface temperature should be above the dew point of not less than 3 ° C. The application of paint performed by mechanical means, using airless aggregatesspraying high pressure plunger pump (type «WAGNER HC 960E»), or manually (brush orroller).The paint is thoroughly mixed with an electric mixer for 3 – 5 minutes before applying Fire-retardant paint is applied in layers, in several passes. Depending on the method ofapplication a layer thickness of the dried coating may be 100-400 microns.It's recommended to apply paint wet film of 400-600 microns thickness in one pass.Recoating is carried out after 2-6 hours (depending on the application conditions).Final drying: 1 - 4 days. Coating based on the fire-retardant paint "Titan" can be operated in therange of temperatures from – 60 °C to +60 °C at the relative humidity of 85%.In case if relative humidity is more 85% , the use of additional protective anddecorative surface layer must be applied in accordance with the "Technologicalinstruction # 001-I-U / 8 on application and exploitation of fire retardant paint "Titan".Packing: plastic or metal pails of 25 kg.Transportation: at temperature above 0 °C.Shelf life: in the manufacturer's packaging in a dry place at a temperature above 5 °C –12 months.
floor coating
Get Price Quote
Heat Resistant Paint
Get Price Quote
Heat Resistant Paint
Get Price Quote
electrically conductive coatings, Epoxy Enamel, Adhesive Tape
Fire Retardant Paint
1,010 Per Kilogram
radium paints
Get Price Quote
PRODUCTS Whatever it is, we’ve got the right paint for it! Browse through our products section for an impressive collection of Emulsions (for interiors & exteriors), enamels, undercoats for a wide range of surfaces from cement to metal to wood. If you’d like some help, check out our inspiration and DIY sections, or just get in touch!
Antislip Floor Coating
Get Price Quote
Antislip Floor Coating
Get Price Quote
Heat Resistance Coatings, Hospital Gloves, domestic led lights
High Gloss Fluorescent Paint
Get Price Quote
high temperature ceramic coating
150 Per Litre
Boiler Paints
Get Price Quote
Deals in thermal insulating coatings, Insulation Paint For Boilers, Magic Coat Paint, Anti Rust paint, Heat Reflective Paint, Damp Proof Paints, solar reflective coating, heat reflective coating paint, we promise to be as flexible as possible, taking account of your needs, holidays and working hours. We work 7 days a week and are happy to provide our services to you at unsociable hours if needed, whilst being punctual at all times.
Leather Edge Paint
900 Per Kilogram
10 Kilogram (MOQ)
Heat Resistant Paint
450 Per Litre
20 Litre (MOQ)
Evaporation Materials
Get Price Quote
Ram Enterprises supplies multifarious superior evaporation materials for vacuum deposition processes. Different kinds of materials in various composition, purity or geometry are available. The following is a selection of products we can offer you. Our highly developed manufacturing capability enables us to produce almost any material according to your specific requirements. Pieces, Granule, Powder, Rod, Wire, Sheet, Nano powder and Ingot, etc. All vacuum Evaporation materials can be produced and supplied in any types at the request of customized specification. Additional engineering services on request Au, Pt, Ag recycle
Specialty Coatings
Get Price Quote
Heat Resistant Paints
200 Per Litre
FRP FLOOR lining
Get Price Quote
industrial floors need frp lining to prevent from damages arising due to chemicals and heavy machines. we have a wide collection of floor lining which provide durability, high performance and outstanding results. they are user-friendly and simple in preparation and application. they are laid on the floor to form a waterproof layer that will probably last a lifetime. Advantages of FRP FRP linings that are used in diverse applications such as leak proofing of roof tops, tank lining in chemical industries, anti corrosion treatment of metal tanks and many more. The FRP is that this along with PP can be fabricated into vessels, tanks, ducts, hoods, piping, impellers, housings etc. Can withstand in any condition Anti corrosion treatment of metal tanks Best for tank lining in chemical industries Cost effective Reliable & Affordable service Rendered by experts
marine protective coatings
Get Price Quote
Corrosion Protection is an area that is of utmost concern, especially with regards to assets continuity and preservation. In line with our expertise and experience, we have developed and patented high performance industrial coatings products that meet such critical demands and conditions. When it comes to voyaging the great big oceans and seas, it's always best to be prepared for the worst. The ocean is unpredictable and the impact can affect boats, ships, and yachts. One common concern is corrosion. Being amidst rough waves and unpredictable sea weather can lead to corrosion of your industrial equipment, ships and more. All metal substrates need to be carefully protected by the best coatings against salt water exposure. When we talk about high performance anti-corrosion coatings, there are certain benefits that come in mind. The first would be its durability, how cost-effective it is and its easy application. It offers ultimate coverage and is perfect for marine and industrial equipment. At Flosil-BET, we aim to find the perfect solution for all corrosion problems. This is the reason why we only manufacture marine and industrial coatings that offer long-term protection and resistance. High performance coatings are nothing but heavy duty paints that provide ultimate protection for all industrial and marine equipment. When you are choosing the right type of coating for your marine and industrial equipment, you need to keep all factors in mind. These factors may include performance, dosage cost-effectiveness, application, etc. Keeping this in mind, we manufacture Aqua Sealer at a competitive price comparing your three coat system. Our anti-corrosion coating, Aqua Sealer, is trusted and used by a wide range of industries including: Marine Offshore Platforms, Splash & Tidal Zones, Underwater Coatings Oil and Gas Manufacturing, Process Industries Heavy engineering, maintainace and much more Corrosion Resistant Coatings Need the best anti-corrosion coating for your industrial equipment? Rely on Aqua Sealer. It offers extreme protection against oxidation, moisture, salt spray and much more. Due to its anti-corrosion properties, Aqua Sealer ensures long lifespan for your industrial equipment. These corrosion resistant coatings are ideal for metal surfaces including steel. While choosing the best coating for your equipment, you need to make sure if it is environmentally compatible or not. Aqua Sealer is not only Eco-friendly but also a high performance coating. This type of anti-corrosion coating also fights friction, minimizes wear and tear, and helps Equipments to maintain their tolerance. Flosil-BET is a well-known industrial coating manufacturer which strives to deliver exceptional high-performance coatings at all times. Get in touch with us today to know more about our coating services.
tank liners
Get Price Quote
tank liners
Get Price Quote
Frp Lining
Get Price Quote
We area unit the leading FRP Lining Contractors and repair suppliers in Chennai, India. With years of business experience in FRP Lining Services, we tend to area unit skilful and manpowered to supply the subsequent styles of FRP Linings FRP Lining for M/S Tanks FRP Lining for Pickling Tanks FRP Lining on RCC surface FRP Lining for Leak proofing FRP Lining for Corrosion resistant Twin Laminate ( PP/FRP and PVC/FRP) Isopthalic Polyester organic compound Vinyl organic compound resin Bisphenol organic compound Expoxy organic compound The rosin system used for FRP Lining additionally differs supported the material contact and their corrosion resistance. We've got to pick out the simplest organic compound system that is a lot of corrosion resistance for FRP Lining. The varied organic compound system used for FRP Lining area unit. Along with these organic compound system for FRP Lining, we are able to additionally do twin laminate exploitation varied Thermoplastics like Polypropylene(PP) and Poly Vinyl Chloride(PVC) We have a sound technical team to settle on the proper material for right application to urge higher corrosion resistant and higher life time.