Cup Anemometer Dealers (32 products available)

The instrument has a cup wheel consisting of three conical cups in a horizontal plane. The cup wheel spindle is of stainless steel and connected worm gearing to a revolution counter mounted in a water proof housing. By observing the counter reading at the beginning and end of any period of interest the average wind speed during the interval can be calculated. The counter observing window is sloped to permit easy reading when mounted on the mast.

• Frequency: 0…100 Hz
• Power supply: 12…24 Vdc
• Operating temperature: -40…+60 °C
• SKU: AM-MW35-DEL
• Category: Wind Sensor
• Make: Delta ohm
• Product Name: MW35-CUP ANEMOMETERS
• Model: MW35

• Country of Origin: India
• Type: Cup Anemometer
• Material: Abs
• Application: Wind Speed and Alarm
• Weight: 1kg
• Range: 0 To 1500 W/m²
• Brand Name: Saras
• Color: Whit
• Warranty: 12 Months

Working Voltage                                        220V/110V AC or 12V/24V DC Testing range                                             0.5m/s~50m/s Start wind speed                                       ?0.5m/s Accuracy                                                    ±0.5m/s (

• Range: 2-4 Meter
• Usage/Application: Laboratory
• Accuracy: 99.9%
• Temperature: 5 Degree C to 25 Degree C
• Height: 4 Feet

• Type: Cup Counter
• Material: Metal
• Application: Measuring The Ambient Temperature
• Color: Brown
• Pattern: Plain
• Surface: Polished

• Type: Cup Anemometer
• Material: Abs
• Weight: 100gm
• Application: Dew Point Temprature, Humidity
• Range: 0 To 1500 W/m²
• Colour: Yellow

We offer technologically advanced Cup Counter Anemometer that is manufactured as per IS : 5912 : 1970 for measuring wind velocity / Wind Run. These instruments basically read the full run of wind passing at the point of observation through Mechanical Counter of the range 0 to 9999.9 km. Known for : Fast and accurate readings Digital readability High durability Reliability Sturdiness Application : Meteorological station

Cup counter anemometer is manufactured as per is : 5912 : 1970 for measuring wind velocity. This instrument measures total run of wind passing at the point of observation through mechanical counter of the range 0 to 9999.9 km

We are offering cup counter anemometer is manufactured as per is : 5912 : 1970 for measuring wind velocity wind run. This instrument measures total run of wind passing at the point of observation through mechanical counter of the range 0 to 9999.9 km    

• Type: Cup Anemometer
• Material: Plastic
• Application: MEASURING WIND SPEED
• Weight: 1kg
• Range: 0 To 1500 W/m²
• Country of Origin: India
• Brand Name: SASA
• Output: HIGH QUALITY
• Color: OFF WHITE AND DARK BLUE
• Usage: MEASURING WIND SPEED
• Size: STANDARD
• Quality: BEST

• Brand Name: Quality Engineering Corporation
• Application: Measuring wind Velocity/wind run
• Material: IS 5912 : 1970
• Place of Origin: Roorkee
• Feature: Measures total run of wind passing at the point of observation

Extensively used for measuring wind velocity /wind run, our Cup Counter Anemometer is manufactured as per IS: 5912: 1970. Our company shares glorious credentials with the proficient Manufacturer and Supplier of Cup Counter Anemometer in Uttarakhand, India. The Cup Counter Anemometers we deal in measures total run of wind passing at the point of observation through mechanical counter of the range 0 to 9999.9 km.

• Country of Origin: India
• Type: Cup Anemometer
• Material: Metal, Copper
• Application: Wind Speed
• Weight: 2 Kg
• Range: 80 km/hr
• Brand Name: Ramkala Manufacturers

The Cup Counter Anemometer is used for measuring the wind speed. The instrument has a cup wheel comprising of three conical cups with bedded edges and free to rotate in a horizontal plane. The cup wheel spindle is connected by worm gearing to a revolution counter mounted inside a water proof housing. The gear ratio between the cup and counter spindles is so chosen that the run of the wind is shown directly in kilometers and tenths. The counter mechanism has five figures and reads upto 9999.9 km. before repeating itselfMaterial : Cup  -  Copper Sheet/ Aluminium 0.71 Mm Thick Cup Arm & Socket  -  Aluminium Alloy Body & Lid  -  Cast Aluminium/ Brass Centre Spindle  -  Stainless Steel Rod Worm  -  Manganese Bronze Alloy Worm Wheel  -  Hard Brass Other Parts -  Made from Non Rusting Material Cup Rotar Assembly : Each of the three rotor cups shall have an internal Dia. of exactly 127.0 mm and be semi conical in shape. The spindle is supported on two bearings, ball bearing at top & thrust bearing at bottom. The assembly is made as per the instruction laid in IS - 5912Worm & Worm Wheel : The worm wheel shall engage true with the threads on the worm without friction. The worm wheel shall be secured to the shaft of the counter by means of a steel pin. The gearing ratio shall be such that 32 revolutions of cup rotor produce one revolution of the worm wheel.Body & Lid : The body and the lid are made from Aluminium casting and glass window only viewing the five figure wheels of counter. Each anemometer will be supplied with 18" long M.S. bar for fixing in concrete.Counter : It is a non-reset, direct drive revolution counter adding one counter for each one tenth revolution. The figures of the counter shall be 7mm high is of white pigment colour on black background.Anemometer General Description : The wind speed is measured using anemometer. The instrument has a cup wheel consisting of three conical cups with beaded edges, free to rotate in a horizontal plane. The cup wheel spindle is connected by worm gearing to a revolution counter mounted inside a waterproof housing. The gear ratio between the cup and counter spindles is so chosen that the run of the wind is shown directly in kilometers. The surface wind for synoptic purpose is reported in knots. To determine the wind speed at the time of observation, take two successive readings of the anemometer at an interval of three minutes. Subtract the first reading from the second one and multiply the difference by 20. This gives the mean wind speed over a period of three minutes in kilometers per hour. To obtain the mean windspeed in knots multiply this by 0.54. Specifications : Material : Cups - Copper or aluminium sheets 0.71 mm thickness Centre spindle - Stainless steel rod Worm on center spindle - Cut from manganese bronze alloy Worm wheel - Hard brass Dimension : The general arrangement and dimensions of the cup counter anemometer shall be as shown in fig. 7.1.Counter : Any suitable non reset direct-drive revolution counter adding one count for each one-tenth revolution of the drive shaft in one direction or ten units for each complete revolution shall be used.Accuracy : When tested in a wind tunnel, the speeds calculated from the readings of the anemometer counter shall agree with the true speeds within tolerances specified below - Speed - Tolerance Below 10 km/h - ±1 kmph Above 10 km/h - ±10%

New Technolab Instruments is one of the preferred names for buying Cup Counter Anemometer. Cup Counter Anemometer is an efficient instrument which is used for measuring speed of wind over a specific time period. Cup Counter Anemometer comes with three semi-conical cups having beaded edges fixed to central point using three brass rods. Highlights : Conforms to the defined parameters Sturdy construction Quality tested Accurate measuring of wind speed

Cup Counter Anemometer is manufactured as per IS : 5912 : 1970 for measuring wind velocity / Wind Run. This instrument measures total run of wind passing at the point of observation through Mechanical Counter of the range 0 to 9999.9 km.      

We bring forth exclusive Cup Anemometer for our esteemed clients. Our electrical signaling Cup Anemometer helps to determine the wind velocity complete with flashlight unit, electric lead instructions with counter. These Cup Anemometers are procured from the leading brands and are assured for long term usage. We are a well-known Cup Anemometer Supplier in Ludhiana, Punjab. Details Item : MI36Price : Each Rs. 7100.00

• Usage/Application: Industrial
• Model Name/Number: MTA-01
• Display Type: DIGITAL
• Color: WHITE
• Number of Cup: THREE CUP
• Packaging Type: CARTON

• Application: Air Velocity
• Brand Name: EVERFLOW
• Country of Origin: Made in India
• Features: The Cup wheel spindle is connected by worm gearing to a revolution counter mounted inside a water proof housing, The gear ratio between the Cup and Counter Spindles is so chosen that the run of the wind is shown directly in Kilometers and tenths

• Features: high reliability, Water resistance, heavy duty.
• Battery: DC 1.5V Battery (UM-4, AAA) x 4
• Model Name/Number: AM-4220
• Air velocity: 0.9 to 35.0 m/s, Ft/min, Km/h, Mile/h, Knots
• Brand: Lutron
• Color: White
• Display Type: LCD

Anemometer Cup Counter is manufactured as per IS : 5912 : 1970 for measuring windvelocity. This instrument measures total run of wind passing at the point of observationthrough Mechanical Counter of the range 0 to 9999.9 km.

• Type: Rotating
• Usage/Application: Industrial
• Display Type: Digital
• Portable: Yes
• Number of Cups: Three

• Application: Industrial
• Material: Polycarbonate
• Wind speed: 0-250km

We are offering wind speed transmitter.

• Range: 0 – 60 m/sec
• Output: 0–20 / 4–20 mAmp / RS232 / RS485 / Pulse Output
• Sensor: Cup type Anemometer
• Sensing: Optical – Chopper wheel
• Starting Threshold: < 0.3 m/ sec
• Accuracy: 2.00%
• Radius of Cup: 64mm
• Radius of Assembly: 250mm
• Height: 270mm
• Cup Material: Aluminum / Stainless Steel
• sensor Body: Aluminum / Brass / Stainless Steel

• Material: Abs, Metal, Plastic
• Application: Dew Point Temprature
• Type: Cup Anemometer
• Weight: 100gm, 1kg, 250gm, 500gmm

Our company is a prominent Manufacturer and Supplier of Cup Anemometer in Roorkee. The Cup Anemometer, which we bring forth, is available with a hi-tech mechanical counter clock. The Cup Anemometer, offered by us, is used to detect the weather conditions. Made as per the industrial quality standards, the Cup Anemometer is widely demanded owing to its superior performance. Standard : As per ISI Available With : Mechanical counter clock complete in box

The Instrument indicates the total run of wind, past an observation point in Kilometers. The conical beaded-edged cups of copper are attached by arms to a central spider. This drives a vertical spindle at a rotary speed proportional to the linear wind speed. A worm gear on the central spindle drives a mechanical counter, with 6 digits.

emf tester, RF Field Strength Meter, Lutron AV-102 ACV Bench Meter

Electrolytic Analysis Apparatus, Aluminum Extrusion Press

Wind Cup Anemometer, vibration monitor, Dynamic Balancing Equipments