FlowtechPower Pappanaickenpalayam, Coimbatore, Tamil Nadu

Used for applying liquid fertilization through drip or sprinkler Irrigation systems Available Size- 1", 1 1/2", 2", 2 1/2" Uniform application of fertilizers or chemicals Save energy and man power Improve fertilizers appluication efficiency

Size : 1", 1 1/2", 2", 2 1/2"

Flow rate- 4-45Lpm (1-12gpm) at nozzle pressure of 135 700k/a Sprinklers are usually made of plastic, brass and steel Available size- 3/4" H76ydraullic pressure- 200 kpa-300kpa Spraying rate- 13-15m It is extensively used in various water saving irrigation are as greenhouse planting, seed cultivation, farmland and gardens etc.

Corrosion resistance High tensile strength Widely used for chemical resistance and better flowrate Efficient use of water, fertilizer and electricity in irrigation of a variety of crops like cotton, soyabean, wheat etc.. Safety of crops and reduction of soil errossion Normal size- 2", 2 1/2", 3"

Allows application of water under high pressure with the help of a pump. It releases water similar to rainfall through a small diameter nozzle placed in the pipes. Water is distributed through a system of pipes, sprayed into air and irrigates most of the soil types due to wide range of discharge capacity.Eliminates water conveyance channels thereby reducing conveyance loss.Water saving upto 30%-50%Reduces soil compaction,Provides frost protection and helps in alteration of micro climate.Suitable for irrigation where plant population per unit is very high.

Made of metals or plasticsMetal guns are made from alloys of copper , aluminium & zincPlastic part of sprinkler which conduct water Raingun sprinkler are designed to irrigate the area by rotating With the help of gear mechanism Raingun sprinklers shall rotate continusoly and regularly on its designed direction

Flowtech products are known for their precision, efficiency, dependability and performance.The products are economical and require very little maintenance. The Company’s products are Drip Irrigation Systems, Sprinkler Irrigation Systems, HDPE Pipes, PVC & UPVC Pipes.This is prefered best for irrigation in agricultural farmsUsed as main and submain in micro irrigation systems.Convenient joining,ermite proof and UV resistant

This is prefered best for irrigation in agricultural farms Used as main and submain in micro irrigation systems. Convenient joining Termite proof and UV resistant Better flow/less irrigation Strong durable Normal size-1/2inch to 4inch Hot and cold water distribution Upto 95degree C

Used for punching holes on laterals for fitting different nozles and micro tubes Easy to operate

Easy to supply accurate quantity of water to the root zone of all crops Can be fited dirextly or with micro tube of laterals Normal Discharge rate available in 4 lit/hr and 8lit/hr Easy to open and clean

Precise and regulated application of irrigated water and plant nutrients at low pressure and frequent intervals through drippers emitted directly onto the root zone of plant with the help of close network of pipes.Improves quality and ensures early maturity of crops,Fertigation can be made efficiently,Soil erosion is eliminated and saves fertilizer (30%) and labour cost(10%)

Diameter-12mm,16mm Working pressure range from 1.25kg/m2-2.5kg/m2 Used for all kinds of micro irrigation systems such as drip or micro sprinklerr,micro prayer,jets, foggers etc. Directly connected to the sublines, protect from UV degradation for enhancing the life Excellent distribution uniformity.

Diameter : 12mm,16mm

Low discharge 60 Lph Radius-8 feet Operating pressure- 1.5 kg/cm sq Less labor/ higher distribution and fertigation efficiency

Material of construction- M.S and epoxy painted Normal Size- 2", 2 1/2", 3" Capacity to filer- 20m cube/hr, 30m cube/hr, 40m cube/hr Use especially for filtering heavy particles from water sources Like river, Lake, Borewells and open wells

Material : M.S and epoxy painted

Harder, more opaque can withstand higher temperatures upto 90degree c HDPE can be used in sunlight for its life cycle Upto 4inch size can be manafactured in coils

Flowtech products are known for their precision, efficiency, dependability and performance.The products are economical and require very little maintenance. The Company’s products are Drip Irrigation Systems, Sprinkler Irrigation Systems, HDPE Pipes, PVC & UPVC Pipes.

Materials of constructions-M.S and Epoxy painted Nominal size-2",2 1/2", 3" Capacity- 20m cube/HR, 30m cube/HOUR, 40m cube/Hour Type of media- Crushed granites/Silica/Sand Filter- Algae or solid impurities

Size : 2",2 1/2", 3"

It is used to connect sprinkle nozzle and raingun It joins quick coupled pipes

Working pressure- 1.5kg/cm sq Discharge- 10 LPH Wetted diameter- 1.5 m Maximum number of units possible on a 12mm lateral- 20, 16mm lateral-40 Connecting tube size- 6m

Available sizes- 40, 50, 63 & 90mm Upto 4kg/cm sq operating pressure Reduces deposit buildup in 1/2" and 3/4" distribution tube Flush valves reduce deposits buildup, open and close at low pressure It is used to clean the pipeline and maintain the fresh flow of water.

Used to block the tail end of each lateral tube Normal size available are 12mm, 16mm and 20mm

Low discharge 60 Lph Radius-8 feet Operating pressure- 1.5 kg/cm sq Less labor/ higher distribution and fertigation efficiency

Sizes available are- 12mm, 16mm The tap can turn on or turn off to control the water flow There are chemical resistant gasket to easy turn on and Turn off

Used for drilling holes on sub main pipes for fitting start and washer Normal size available are 12mm, 16mm Material of construction- M.S/Plastic