Generator Set Dealers in Coimbatore

Nitrogen Gas Generator Nitrogen Gas & Air Generator High Purity Nitrogen / Nitrogen & Air Generator Light weight and easy to operate Extract from the air by electrochemical separation Flow is visualized by digital display The electrolysis separation pool is made of S.S Low temp. of electrolysis pool. Equipped to prevent the returning of the liquid. Over voltage & over current protection

We are offering function generator - ni. features / specification: • 5 digit led display (including 3 digits for voltage) • frequency and amplitude displayed simultaneously • output waveforms: sine wave, square wave and triangle wave • frequency of output signal: 0.2hz~2mhz • duty cycle adjustable: 20% ~80% • width of output signal adjustable continously • amplitude without attenuation: 0.9v~10v • amplitude with 20db attenuation:100mv ~1v • amplitude with 40db attenuation: 10mv~100mv • power: ac 110/220v standard accessory: power cord, manual dimension: 270 x 215 x 100mm

Tachogenerator is a device which generates an electrical output directly proportional to the shaft speed. The voltage thus generated is fed to a speedometer for speed measurement andor used as feed - back signal for controlling the speed of a rotating machine equipment. In every automatic control system, since the system performance is directly related to the performance it becomes essential that the

This products have been widely used in wind power generators in India. The special arrangement of tubes lowers the internal wind-resistance, improves the cooling flow of the generator and increase the efficiency.Use and applications: • Electric-Motors and Generators • Electrical converter plants • Air pre heating powered by exhaust or waste air • Heat recovery plants for process engineering Depending on the performance data required by the customer or user, several tube designs and arrangements are available: • Round tubes in triangular tube layout • Round tubes in square tube layout • Flat tubes in square tube layout Construction and design By using different arrangements of tubes (e.g."W-arrangement") the required performance and the permissible pressure loss can be achieved within the limited size of the heat exchanger. The tubes are either sealed in the tube plates with a special compound material or fixed into the tube plates by tube expansion. Depending on the operating conditions, the following tube materials can be used: • Aluminium alloy • Brass and complex brass • Cupro nickel • Steel or stainless steel

Oxygen is the most important clinical gas used in health care centers and Hospitals. No modern hospital can manage without oxygen gas Generator. Pure oxygen is an essential resource in the operating room during anesthesia, for the respiration of patients, and in the intensive care or neonatal units. The constant high demand for this gas renders substantial expenses for hospitals. Currently, hospitals buy oxygen from bulk oxygen gas Generator manufacturers. The bulk oxygen is bought in both liquid and gaseous form. These sources of oxygen can become an economic burden as large hospitals can spend more money in a year on oxygen supply alone. Fortunately, Medical oxygen can be generated on-site in any hospital, clinic, or health care center in a much more cost effective manner. Using pressure swing adsorption method oxygen is generated and it is being used, thus enabling a health care center to be self-sufficient in meeting its oxygen demand. PSA methods are capable of producing oxygen in medium capacity. This is ideal for an on-site hospital unit, because it is a safe process with reasonable energy and area requirements. And acceptable as per USP and Global standards. (Read Catalouge for detailed Principle and Details)

As we increasingly spend longer indoors we are all becoming more susceptable to allergic reactions, colds and headaches which are caused or exacerbated by indoor air. Plasmacluster air purifiers clean the air using positive and negative ions. These are positive hydrogen and negative oxygen ions, which are extracted from the water molecules in the air.     Plasma discharge generates and emits the same positive and negative ions that occur in nature. Plasmacluster technology is sharp’s original air disinfecting technology for suppressing the effects of airborne viruses, and breaking down and removing airborne mold     What’s Plasmacluster Ion Technology? The crisp, refreshing air of the great outdoors (for example, in a forest) is clear and clean, and gives us an especially nice feeling. The reason for this is that there is a good balance of positive and negative ions in the air, that is, there are roughly the same number of each, and they are present in abundance. In the natural world, these positive and negative ions work to purify the air. But the quality of the air that most of us breathe is poor. It's often polluted and the number of ions it contains is low and the ratio of positive and negative ions is out of balance. To combat this problem, a new air cleaning technology, "Plasmacluster Ions," based on this natural air cleaning system is now available.   How Plasmacluster Ions Work to Clean the Air A built-in Plasmacluster Ion generator produces positive and negative ions from the water molecules (H2O) and oxygen molecules (O2) in the air. These ions, which have strong germ-killing qualities, are released back into the air. By themselves, these positive and negative Plasmacluster Ions are inherently unstable, but they become stable when they cling to "something." When they encounter airborne germs (like mold spore) or toxic substances (like tobacco smoke), they form clusters surrounding the offending entity.By surrounding airborne microbes (for example, mold fungus) the ion clusters destroy them, and also quickly eliminate and decompose the sources of annoying odors.   *Note: The deactivation of microbes has been verified in laboratory tests conducted by the Ishikawa Health Service Association.   Plasmacluster Ion Action Works to Keep Air Clean and Pure The Plasmacluster Ions form into groups of positive and negative ions. They knock out airborne mold fungus and decompose sources of annoying odors. Experiments conducted by a testing organization recognized by Japan's Ministry of Health, Labor and Welfare demonstrated that this technology has the power to reduce mold fungus by 90% in one hour. Air purification technology based on Plasmacluster Ions represents a revolutionary new system for cleaning the air totally unlike any existing techniques.   Working Mechanism for Plasmacluster Ions The working mechanism for Plasmacluster Ions against bacteria, viruses and allergens is the positive and negative ions surround them, and OH radicals generated from the ions damage their structure by fragmenting and decomposing proteins on their surfaces.   Adaptable In a Wide Variety of Lifestyle Situations The Plasmacluster Ion technology can play an active role in a wide range of lifestyle situations. Let's start with making peoples' lives more comfortable

The Nitrogen gas generator manufacturers by Trident implement a simple purification process to eliminate impurities. It is used in various industries for different purposes.

We supply Programmable Signal Generator, which has the amplitude of 0 - 3V at 9V DC input and distortion of less than 1% (at 1 kHz). This signal generator has the rise time of less than 50ns (at 1 kHz).

We deliver Signal Generators in different frequency ranges like 0.1, 0.3 Hz, etc. These signal generators are reckoned for their DDS technology, accuracy and stable & low distortion for an output signal.