Industrial Motors Dealers in Coimbatore

Double side shield SKF ball bearings factory lubricated for long service, Vacuum Impregnated, stators with an additional moisture proof coating, Special film wound Aluminium can capacitors.

Features Drip-proof Stainless steel shaft Totally enclosed surface cooled IP 55 protection to suit the working environment Special long shaft as per customer's design Precision balanced rotors Moisture-proof windings Double side shield ball bearings RANGE - 0.5 HP (0.37) to 20 HP (17.5 kw) in 4, 6, 8 and 12 poles

We are identified as one of the most prominent FRP Cooling Tower Motor Manufacturers in Tamil Nadu. Our Cooling Tower Motor is made up of quality raw materials due to which it has high tensile strength and durability. However, it consumes low power. Our Electric Cooling Tower Motor is highly efficient and renders consistent performance for longer period of time.

VM series 0. 75 kw to 55kw Designed to operate with closed loop Flux vector drive High operation speed upto 8000 rpm Low rotor inertia,fast response rated torque even at standstill speed feedback: 1024 ppr encoder

Texmo single phase Induction motors are of TEFC squirrel cage type designed to operate in a wide voltage range. These motors are available in international standard frame sizes. They are built in robust, grey cast iron housing and incorporate dynamically balanced rotors.

Axial Piston Pump are available with cast iron flanges and covers version to reduce the noise level. Hydrostatic balance takes up axial slack through the pressure supplied to a defined bushing area. Bearings lubrication is automatic and proportional to the pump operating pressure. Each pump can be assembled whether with standard flanges (European, German or SAE) or with special ones (ZF, Perkins and Renault), with tapered, cylindrical or splined shafts. Furthermore it is possible to assemble covers with pressure relief valves and flow control valves. All standard pumps are arranged to drive a supplementary pumps, using the coupling kits, available also in the short version

The Submersible Motors are eco friendly rewindable, water filled, wet type. The stator windings are of water proof PVC / Polymer winding insulation enclosed in stainless steel body. Dynamically balanced rotors maintains increased life cycle and uniform clearance in bearings resulting in minimized wear and tear. The high finish thrust bearings are of unique segmented design to withstand high axial thrust load and upthrust loads and lowest friction. The motor housings, upper housings and motor base of high grade, rugged cast iron and specially treated to withstand corrosion. Mechanical seal – SiC / TiC (Optional) prevents entry of abrasive sand particles inside the motor. A large pressure equalising diaphragm with inbuilt spring load ensure safe winding temperature at varied loads. The cable leads are connected & sealed with windings. Motors arrive 100% safely pre-filled with water. For frosty conditions, water with propylene glycol is filled for operating temperatures from – 15° C. Range :  4″ Submersible Motor – 1 HP – 3 HP (1 Ph, 220 / 240V), 1 HP – 5 HP (3 Ph, 415V, 50 Hz) 6″ Submersible Motor – 3 HP – 30 Hp (3 Ph, 415 V, 50 Hz) Designed for 50 / 60 Hz operation. Full SS 304 motors available on 4″ & 6″ on request.

Suguna Submersible motor is a squirrel cage water cooled and water lubricated induction motor. The pumps are of radial mixed flow type pumps. The bearings are water lubricated.Submersible pumps are for purifying water from deep wells using submerging in water.

Stainless steel rod with three leafs provided for stirrer Height can be adjusted by rack and pinion in stand type Inverter used for speed control

Our Brake Motor are known for their accurate and precise manufacture. Our wide connections worldwide with C&F agents, as well as our extremely professional and dedicated documentation team ensure that our clients have the minimal of issues while procuring a product from us.   Available in Both DC & AC Voltage - 24 - 195 V - 415 V

• Single phase Motors types are CS&R (Capacitor Start and Run), CSCR (Capacitor Start and Capacitor Run), and CSIR (Capacitor Start Induction Run). • Out put : 0.09Kw to 1.5Kw • Voltage : 0.09Kw to 230V ± 10% • Specially designed Centrifugal Switch for noise less and silver contacts to increase life of the switch. • All other specification is similar to standard Motors.

V series of Vibrator Motors are specially developed for variable individual application to suit all working environments.The Vibrator Motors develops centrifugal force from 5 kg (50 N) to as much as 8000 kg (80000 N). Higher and non standard rating Vibro Motors on request.

Features   Speed : 1500/3000  RPM   Type : Foot/Flange/Foot cum flange   Frame : 63 to 100   Class F Insulation   Totally enclosed fan cooled type   Aluminium diecasted rotor   High quality Bearing   Features   Speed : 1500/3000  RPM   Type : Foot/Flange/Foot cum flange   Frame : 63 to 100   Class F Insulation   Totally enclosed fan cooled type    

High quality vaccum pressure impregnated stators with additional moisture proof coating class Rotors are dynamically balanced Maintenance free sealed imported heavy duty bearings (Nachi) Vibration proof terminal board Intensivity to damp and fine dust Degree of production for vibrator motors IP 55 65