K. U. Sodalamuthu and Co. Pvt. Ltd Mettupalayam Road, Coimbatore, Tamil Nadu

The Rotary Model Moulding Machine is of state-of-the-art design and is operated by electro-pneumatic power. The advanced design of control has independent control circuits for all operating units and conveniently located remote control operation ensures the operator to work comfortably and to have close monitoring of the process. Most of the sensitive operations are logic controlled and fail safe.  

SALIENT FEATURES OUTPUT OF THE MAIN WINDER (APPROX) :- Upto 2000 drums per day depending on the sizes and raw materials used. SIZES OF THE PRODUCTS MADE (APPROX) :- 

Brand Name : Sodaltech

Length : Around 280 mm

FEATURES   Maximum parent reel width (approx) : 2000mm Parent reel outer diameter (approx) : 1300mm Slit reel outer diameter (maximum) approx : 1300mm Minimum slitting width : 75mm Maximum cutting stations : 27 Nos Output Speed (approx) : 100 metres per minute depending on the quality of the raw material, size etc Parent Paper Reel Loading : Automatic Parent Paper Reel Clamping : Automatic Unloading of slit reel : Automatic Maximum weight of the parent reel (approx) 800 Kgs GSM Range : 100 GSM to 600 GSM Paper Core Size : 3” Both Unwind and Rewind station Total Power (approx) : 13 KW Air Supply requirement : 6 Bar (100 lpm) Trim waste removal system Shaftless paper reel clamping Numerical braking system for tension control

The Rotary Model Moulding Machine is of state-of-the-art design and is operated by electro-pneumatic power. The advanced design of control has independent control circuits for all operating units and conveniently located remote control operation ensures the operator to work comfortably and to have close monitoring of the process. Most of the sensitive operations are logic controlled and fail safe.

The Rotary Model Moulding Machine is of state-of-the-art design and is operated by electro-pneumatic power. The advanced design of control has independent control circuits for all operating units and conveniently located remote control operation ensures the operator to work comfortably and to have close monitoring of the process. Most of the sensitive operations are logic controlled and fail safe.

This model is recommended for entry level pulp moulding, project, with medium output. (e.g.: egg trays, fruit trays etc) This is similar to the conventional Wet moulding process with transfer mould and forming mould working on reciprocating method. The forming mould goes down to the pulp and comes out as product formed over the mould. The transfer mould comes down, does wet press and goes up by holding the wet product with it.

This machine is used to make liquid pulp from waste paper. The machine is ruggedly built to withstand fluctuating heavy pulping loads and the walls are made of mild steel with rust preventive coatings. The special material used in cutter (Impeller) ensures aggressive cutting action with less input of power and time. The cutter is operated by an electric motor. Optional Automatic waster paper conveyor can be attached to pulper. Capacity of the Pulper: To pulp waste paper up to 200 kgs/hour depending on the raw material

SODALTECH manufactures various models and types of Machines, Equipment, Spare Parts needed mainly to manufacture Paper Pulp Moulded products generally made from Waste Boxes, Papers, Indian Pulp, Taiwan Pulp, Korean Pulp, Canada Pulp, China Pulp, Thailand Pulp, Indonesia Pulp, Southern Pulp etc, most of the Paper & Paper based Paper Waste can be recycled using  SODALTECH Equipment. The production lines are simple to operate and maintain.  It has high productivity, easy interchangeability of mould tooling, consumes less energy with less manufacturing cost, faster setting time etc, It can be upgraded to next higher level of production by adding less number of additional machines. Various models and ranges are available in Wet Moulding & Dry Moulding Process (Fine Moulding). The range of products that can be made are endless. Few examples are Egg Trays (30-cell) Egg Box/Carton (6-cell,10-cell, 12-cell, 6+6 - cell, 18 cell) Egg Carton of multi cavity sizes, Can Shell types, Apple Tray, Fruit Tray, Tomato Tray, Pear Tray, Orange Tray, Cup carriers used in fast food outlets (4 pack, 2 pack) Hospital  and Medical Care products (like Bed Pan Sleeves, Male Urinal Bottle, Female Urinal Pots, Kidney Tray, Bowls) Nursery Pots, Seed Pots (Jiffy Pots), Industrial Packs (Packing Buffers) Electronic Products Packing Pads and Paper Trays, Tableware etc. Advantages of SODALTECH Paper Pulp Moulding Machines  .    Machines Sophisticated yet easy to operate.    Rust protected solid steel construction.    Fast interchanging of moulds with dryer linking option.    User friendly control panel with low maintenance service system.    Low cost of production due to less power, space and labour.    Choice of end product colors.    Water proof products by using additives.    High and fast return on investmentRange of Moulding Machines popular in marketBASIC MODEL EGG TRAY MACHINE :- This is used mainly for entry level or sampling purposes. The Machine will have basic requirements like Forming Mould & Transfer Mould, Vaccum Pulp, Water Separator etc. This can be on Wet Moulding (Wet Molding) or Dry Moulding (Fine Moulding) process.This model Machines are available to make Carboard Egg Trays, Carton Egg Trays, Disposable Pulp Tableware, Finery Pack, Fruit Tray, Cardboard Lids, Paper Based Packaging, Poultry Products, Trays, Quality Egg Trays, Quality Egg Boxes, Quality Table Wares, Thermoformed Fibre. The Basic Model Machines/Lines are available in following major ranges or as per the customer requirements.1.     Cure on Moulding Machine2.     Cure on Moulding Equipment3.     Direct Hot Press4.     Egg Carton Machine5.     Disposable Pulp Tableware Lines6.     Dry in Mold Technology7.     Dry Type Pulp Mould8.     Dry Type System Pulp Moulding 9.     Finery Pack Line10.     Fruit Tray Line Machines for Paper Based Packaging11.     Pulp Moulding Production Lines for Industrial Packing 12.     Tableware Machines 13.     Tableware Equipments 14.     Quality Egg Tray Making Plant 15.     Quality Egg Box Making Machine 16.     Advanced Pulp Moulding Technology 17.     Oven Dry Manufacturing Process18.     Productive Packing Material 19.     Male Urinal Bottle Machines 20.     Dry Type Pulp Moulding Machine21.     Disposable Pulp Tableware Production Lines22.     Fine Pulp Molding System23.     Pulp Male Urine Bottle Moulding Machine24.     Pulp Tableware Line25.     Tool and Die set Manufacturing26.     Wet Type Pulp Moulding Machine

Brand Name : SODALTECH

Phase : 3

Frequency : 50 HZ

Paper Cores for winding fax rolls, telex rolls, toilet tissue paper,newsprint, kraft paper etc. Packaging Cores to wind BOPP tapes, polyester films, metalized foil etc. Textile Yarn carrier for POY winding, DTY winding, open-end spinning, fabric and jute winding, non-woven fabrics, carpet yarn winding. Others - Thermo-couple tubes, electronic cores, civil construction cores, storage tubes, pyrotechnic cores and mailing tubes.

FEATURES   Higher output Extra strong tubes Electronic proportional control system for winding speed adjustment Rapidly interchangeable mandrels Pneumatic control of winding belt tension Built-in control panel with remote station. 

   Applications   Paper Cores for winding fax rolls, telex rolls, toilet tissue paper,newsprint, kraft paper etc. Packaging Cores to wind BOPP tapes, polyester films, metalized foil etc. Textile Yarn carrier for POY winding, DTY winding, open-end spinning, fabric and jute winding, non-woven fabrics, carpet yarn winding. Others - Thermo-couple tubes, electronic cores, civil construction cores, storage tubes, pyrotechnic cores and mailing tubes.

Depending upon the application, the specification of the cone varies. The popular sizes in the present Textile Industries are 9 Deg 15', 5 Deg 57', 4 Deg 20', 3 Deg 30', etc. In all yarn winding application, tension at the traverse extremes pulls yarn towards the cone centre. So we have to provide suitable surface finish to the cones like Embossing, Velvet Finishing, etc.

The On-Line Drier is used to dry the products and delivers out the same through the conveyor. The On-Line Drier is of tunnel type having independent metal trays coated with heat resistant coating and holders operated by automatic indexable conveyorised chain. The conveyor is of multi-pass system to save energy, space and investment. The whole chamber is made in a strong fabricated structure and the walls are insulated to have minimum radiation loss. Both sides of the Drier can be opened easily for general maintenance and inspection. The inner walls and ducts are protected with heat resistant paint for long life. A safety clutch is provided to prevent any major accident while in operation.  

This model is highly suitable for high volume production of egg trays, fruit trays etc. This machine is fitted with sophisticated indexing mechanism to ensure optimum performance levels.  

Certification : CE & ISO

Condition : New

Brand Name : SODALTECH

Total Carbohydrate : 12 months

    This Moulding Machine is used to mould the pulp products by using the relevant moulds. The moulding machine is of state-of-the-art design and is operated by combination of mechanical indexing and electro-pneumatic system. The advanced design of control has independent control circuits for all operating units and conveniently located remote control operation ensures the operator to work comfortably and to have close monitoring of the process. Most of the sensitive operations are logic controlled and fail safe.

This machine is used to make pulp from waste paper. The machine is ruggedly built to withstand fluctuating heavy pulping loads and the walls are made of mild steel with rust preventive coatings. The special material used in cutter (Impeller) ensures aggressive cutting action with less input of power and time. The cutter is operated by an electric motor. Optional Automatic waster paper conveyor can be attached to pulper.

This machine is used to add smooth finish and presentation to the trays. The machine is simple to operate and maintain and the output is synchronised with main moulding machine.  

Brand Name : SODALTECH

Output : Up to 30 pieces per minute depending upon size and operator's efficiency (or) approx. 35,000 cans/day depending upon the sizes 

This machine is used to fix the metal rings with the top & bottom of the drum and seamed to hold firmly with body.   FEATURES   This machine is simple to maintain and operate. Pneumatically operated clamping and grooving devices The diameter and length of the machine can be adjusted easily Automatic constant web tension

This production line is used to manufacture cylindrical Fibre Drums using Kraft Board. These drums are used to pack bulk drugs, chemicals, dyes, pharmaceuticals, engineering, consumer goods, adhesives etc. In Textile Mills the fibres are also transported through these drums. Fibre Drums are the most preferred option wherever there is a need for a cost-effective, light weight but strong packing material. This machine is used to manufacture spirally wound paper tubes using various plies and glue.