Fasteners King Private Limited Delhi

The fischer threaded rod FTR is a cost-effective system component without approval for the fischer resin capsules RSB and RM II and for fischer injection mortars. For single fixations, the application with the pre-portioned resin capsule is particularly cost-effective. The hot-dip galvanised and zinc-plated steel threaded rods enable extremely diverse applications. The system is particularly suitable for cost-effective fixations indoors where no approval is relevant. The FTR is set with the bonded anchor setting tool and a hammer drill using rotating and hitting motions. During the resin capsule setting process, the capsules are destroyed by the characteristic oblique edge and are mixed, and the mortar is activated.ADVANTAGESThe threaded rod FTR is the cost-effective solution for applications with resin capsules where no approval is required.APPLICATIONSAnchorings with resin capsules without approvalAnchorings with injection mortars without approval

Number Of Flower : Threaded Rod

Application : Anchorings With Resin Capsules Without Approval

Stainless steel Z Clamp for secure solar mounting.Ideal for standing seam roofs with quick-lock mechanism.Corrosion-resistant and weatherproof for outdoor use.The Z Clamp is a robust and precision-engineered stainless steel clamp designed specifically for solar panel mounting applications. Its Z-shaped profile provides firm grip and stability, ideal for standing seam roofs. Equipped with a slot for flexible positioning and a pin-type fastener for quick locking, it ensures durability and secure installation in all weather conditions.Made from high-grade stainless steel, this Z Clamp is perfect for long-term use in solar PV systems. It offers excellent corrosion resistance and structural integrity, making it suitable for use in demanding environments. With its easy-to-install design and tight grip locking system, it helps streamline the mounting process while ensuring maximum safety.

Material : Stainless Steel

Number Of Flower : Z Clamp

Usage : Solar Panel Mounting

Speciality : Corrosion-resistant, Weatherproof

Durable L Clamp for solar panel mounting systems.Corrosion-resistant, easy-installation clamp for rooftops.Ideal for RCC, metal, and tile roof solar structures.The Stone Cladding L Clamp is a solar mounting accessory used to secure PV modules on various roof types including RCC, metal sheet, and tile roofs. Made from high-grade stainless steel or galvanized iron, it features a slotted hole for easy bolt alignment and strong grip. Its simple L-shape ensures quick and durable installation in all environments.Engineered for reliability, this L Clamp provides a solid anchor point for mounting solar rails. It is corrosion-resistant and built for long-term use in rooftop solar installations. The slotted design allows for flexibility during installation, ensuring precise alignment and optimal performance.

Speciality : Slotted Hole For Easy Bolt Alignment,Corrosion-resistant,Durable

Usage : Securing PV Modules On RCC,Metal Sheet,And Tile Roofs

Material : Stainless Steel Or Galvanized Iron

Heavy-duty galvanized L & T clamp for solar mounting.Available in multiple sizes for trapezoidal roofs.Corrosion-resistant, durable & easy to install.The L & T Clamp is a heavy-duty solar mounting clamp made from hot-dip galvanized iron, designed to provide strong support for PV panels on trapezoidal metal sheet roofs. It features a pre-drilled slot for easy installation and a rust-resistant coating for long-lasting performance in harsh weather conditions.Crafted with precision, this L & T clamp ensures a tight and secure fit for solar modules. Its galvanized body resists corrosion and is ideal for use in industrial and residential solar installations. Available in multiple sizes to suit various panel and roof types, this clamp offers a reliable solution for long-term mounting stability.

Number Of Flower : L & T Clamp

Material : Galvanized Iron

Corrosion Resistance : Yes

Premium stainless steel chair clamp for solar panel mounting.Corrosion-resistant and easy to install with rivet support.Ideal for long-term, weather-resistant solar structures.This stainless steel chair clamp is designed for secure mounting in solar panel structures. With its high durability and corrosion-resistant properties, it ensures long-term performance in diverse weather conditions. The slot hole enables quick installation, and the rivet provides a firm hold for reliable support.Ideal for PV module installations, this solar chair clamp features a robust design with high-grade stainless steel construction. It is engineered for quick assembly and provides superior grip with its included rivet fastening mechanism. Suitable for both rooftop and ground-mount solar setups.

Corrosion Resistance : High

Usage : Solar Panel Mounting

Material : Stainless Steel

Steel clamp with rubber lining for noise-free pipe mounting.Ideal for HVAC, plumbing, and conduit support systems.Vibration and corrosion-resistant rubber pipe clamp.Rubber Clamps are designed for securely fixing pipes and conduits to walls, ceilings, or other surfaces. The inner EPDM rubber lining protects against vibrations, noise, and wear, while the outer steel structure ensures a firm grip and structural support. Ideal for plumbing, electrical, and HVAC applications.This pipe clamp with rubber lining is made from high-quality galvanized steel and fitted with an EPDM rubber insert to provide both strength and shock absorption. Suitable for both indoor and outdoor installations, it ensures long-lasting performance, especially in installations requiring low noise and vibration.

Number Of Flower : Pipe Clamp

Material : Galvanized Steel, EPDM Rubber

Usage : Pipe Mounting For HVAC, Plumbing, Conduit Support Systems

Specialities : Vibration And Corrosion-resistant, Noise-free Mounting, Shock Absorption

Sturdy U-shaped chilly clamp for pipe support.Rubber-lined for vibration and noise reduction.Ideal for plumbing and HVAC pipe installations.Chilly Clamps are specially designed U-shaped pipe supports that provide firm grip and secure support for pipes in plumbing, HVAC, and industrial applications. Their versatile mounting options and available rubber lining ensure low vibration, reduced noise, and extended pipe life.This pipe support chilly clamp offers a strong mechanical hold for vertical and horizontal pipe installations. Designed for durability, it is perfect for both indoor and outdoor environments. The rubber-lined version is particularly useful in sensitive installations requiring vibration absorption.

Number Of Flower : U-shaped Pipe Support

Material : Metal With Rubber Lining

Usage : Pipe Support For Plumbing, HVAC, And Industrial Applications

Specialities : Rubber-lined For Vibration And Noise Reduction

Strong and durable C Clamp for multi-purpose mounting.Ideal for solar panel, pipe, and industrial support.Corrosion-resistant clamp with high grip strength.The C Clamp is a versatile, heavy-duty clamp widely used for holding or securing objects to beams, supports, or frames. Its C-shaped design offers strong grip and support, and it’s ideal for solar mounting systems, pipe installations, and temporary or permanent fastening applications. Available in different sizes and coatings for varied use environments.Constructed from premium-grade steel or stainless steel, this C Clamp is designed for durability and strength. Its corrosion-resistant finish ensures longevity even in outdoor or industrial settings. Simple to install, it’s commonly used in electrical conduit support and solar racking systems for secure anchoring.

Number Of Flower : C Clamp

Material : Steel Or Stainless Steel

Packaging Type : Varied

Usage : Multi-purpose Mounting, Solar Panel Support, Pipe Installations,

Our Universal Fit OPEN-LOK™ Diamond Grit Boot Blade 1 Pack is designed for Oscillating Multi-Tools. This boot blade is made with diamond grit, offering you up to 5X longer life than standard carbide grit blades. The boot shape of the blade with contoured diamond grit edges delivers optimal performance in grout removal. This MILWAUKEE® multi-tool blade is ideal for larger grout removal projects with a curved edge that gives you more control.Japanese Tooth Blades – 2X faster clean cuts in hardwoodHigh Carbon Steel Blades – aggressive wood cuttingFeatures the OPEN-LOK™ universal fit (not for Starlock tools) and a customizable case compatible with PACKOUT™.

Material : Diamond Grit

Our NITRUS CARBIDE™ Extreme Metal Universal Fit OPEN-LOK™ Oscillating Multi-Tool Blades provide the ultimate cutting experience, delivering the fastest cutting and longest life on the jobsite. The extreme metal NITRUS CARBIDE™ multi-tool blade delivers up to 2X more cuts than Carbide Teeth blades – capable of hundreds of cuts in deck screws. The extreme metal blade is ideal for cutting metal fasteners such as bolts, screws, nails, and threaded rods. The new Universal Fit OPEN-LOK™ Anchor is reinforced for added strength and control and allows for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.NITRUS CARBIDE™ delivers the fastest cutting and longest lifeNew Universal Fit OPEN-LOK™ anchor for better strength & controlNITRUS CARBIDE™ blades provide up to 2X more cuts vs Carbide TeethUniversal Fit OPEN-LOK™ Anchor fits all major brands of non-Starlock toolsOptimized blade length for greater cutting capabilities1-3/8″ Cutting Width and 2″ Max Plunge Cut DepthLong Lasting Laser Etching For Clear and Easy Blade IdentificationProtective black oxide coating for corrosion resistanceMade in USA with global materialsFor use in extreme metals such as bolts, screws, stainless steel, threaded rods, and metal pipe (Use tool speed recommendation chart for max life)

Material : NITRUS CARBIDE

Number Of Flower : Oscillating Multi-Tool Blade

M12 Compact Cable CutterM12 CC-0Professional capacity 32 mm: Powerful jaws cut effortlessly through large cableSuperior blade geometry: Delivers a round and installation-ready cutBreakthrough ratcheting mechanism: Fits into tight panels for more effective cuttingProfessional capacity ⌀32 mm – powerful jaws cut effortlessly through large cableREDLINK™ overload protection electronics in tool and battery pack deliver best in class system durabilityExtended run time – delivers up to 60 cuts of 4 x 35 mm² copper per chargeCompact front end – goes straight to the cable in panels or electrical cabinets without long handles looping or ratchetingSuperior cut quality – delivers a flat, round and installation ready cutAuto-release lever – provides the ability to cut, reload and quickly repeatIndividual battery cell monitoring optimises tool run time and ensures long term pack durabilityOn board fuel gauge and LED light – added user convenience and illumination in low lit working conditionsREDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack lifeFlexible battery system: works with all MILWAUKEE® M12™ batteries

Number Of Flower : Compact Cable Cutter

Model Number : M12 CC-0

M12 BPRT-0CPull Up to 250 4.8mm Stainless Steel Rivets per charge (1.5Ah battery)Pull Up to 450 3.2mm Stainless Steel Rivets per charge (1.5Ah battery)Part of 90+ Solutions on the M12 PlatformPull Up to 250 4.8mm Stainless Steel Rivets per charge (1.5Ah battery)Pull Up to 450 3.2mm Stainless Steel Rivets per charge (1.5Ah battery)Part of 90+ Solutions on the M12 PlatformPull 2.4 / 3.2 / 4.0 / 4.8mm RivetsAluminum, Steel, Stainless Steel – Capacity20.32mm Stroke Length9000N pulls forceTool holds rivet in any orientationErgonomically designed for force reduction

Number Of Flower : Rivet Tool

M12 FDD2-0XPOWERSTATE Brushless Motor delivers a More Powerful Subcompact Drill to complete a wider range of applicationsDelivers Faster Speed Under Load13mm All-Metal chuck for maximum durability, grip and bit retentionPOWERSTATE Brushless Motor delivers a More Powerful Subcompact Drill to complete a wider range of applicationsDelivers Faster Speed Under Load13mm All-Metal chuck for maximum durability, grip and bit retentionAll-metal belt clip for portabilityLED light for better visibility in low-light situationsOnly 152mm in length for more access in tight spacesREDLINK PLUS intelligence provides the thermal ability to drill more holes back to backLight Weight at 1.4kg (w/ M12 6.0 Ah battery) for tool belt portability and less fatigue in the work dayMechanical Clutch for consistency in driving a wide range of fastenersAll-Metal Gearcase for ultimate durability45Nm of torquePart of the M12 System, featuring over 125+ Tools

Number Of Flower : Drill Driver

Chuck Size : 13mm

M12 ONEFTR12-0C0Milwaukee Tool’s first digital torque wrench, delivers faster installation by replacing the hand toolProvides 17 – 203 Nm of torque range and accuracy within ±2% for torque critical fastenersAdjustable run-down torque to control the tools output torque via the motor to prevent over torqueMilwaukee Tool’s first digital torque wrench, delivers faster installation by replacing the hand toolProvides 17 – 203 Nm of torque range and accuracy within ±2% for torque critical fastenersAdjustable run-down torque to control the tools output torque via the motor to prevent over torqueFour measurement modes (ft-lb, in-lb, Nm, Kg-cm) and 15 available presetsDurable design to withstand the most demanding jobsite environmentsFour notification modes that the tool is reaching, meeting or exceeding the torque target (audible, LED, LCD, and vibratory)Six pre-programmed languages including English, Chinese and KoreanIntegrates three MILWAUKEE-exclusive technologies – the POWERSTATE brushless motor, REDLITHIUM-ION battery pack and REDLINK PLUS intelligence hardware and software – which deliver outstanding power, run time and durability on the jobsiteFlexible battery system: works with all MILWAUKEE M12 batteries

Number Of Flower : Digital Torque Wrench

Torque Range : 17 - 203 Nm

Accuracy : ±2%

Usage : Fastening Applications

Compact and balanced 12 V rotary hammer with 1.15 J of impact energy4-mode operation: rotary hammer, hammer only, rotation only and selectable work position of the chisel (variolock) for maximum versatilityAnti-vibration system (AVS) for decreased user fatigue and lower vibration exposure. Also, an added anti-vibration side handle for lowering the vibration exposure even furtherOptimised hammer drilling up to 12 mmThe DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®’s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durabilityFlexible battery system: works with all MILWAUKEE® M12™ batteries

Number Of Flower : Rotary Hammer

Power Source : Battery

M12 ONEFTR12-0C0Milwaukee Tool’s first digital torque wrench, delivers faster installation by replacing the hand toolProvides 17 – 203 Nm of torque range and accuracy within ±2% for torque critical fastenersAdjustable run-down torque to control the tools output torque via the motor to prevent over torqueMilwaukee Tool’s first digital torque wrench, delivers faster installation by replacing the hand toolProvides 17 – 203 Nm of torque range and accuracy within ±2% for torque critical fastenersAdjustable run-down torque to control the tools output torque via the motor to prevent over torqueFour measurement modes (ft-lb, in-lb, Nm, Kg-cm) and 15 available presetsDurable design to withstand the most demanding jobsite environmentsFour notification modes that the tool is reaching, meeting or exceeding the torque target (audible, LED, LCD, and vibratory)Six pre-programmed languages including English, Chinese and KoreanIntegrates three MILWAUKEE-exclusive technologies – the POWERSTATE brushless motor, REDLITHIUM-ION battery pack and REDLINK PLUS intelligence hardware and software – which deliver outstanding power, run time and durability on the jobsiteFlexible battery system: works with all MILWAUKEE M12 batteries

Number Of Flower : Digital Torque Wrench

Accuracy : ±2%

Application : Fastening Applications

Best in class power: 542 Nm of fastening and 745 Nm of nut-busting torque to tackle most common applicationsA weight of 1 kg without battery and a length of 122 mm means better access to tight spaces and less user fatigue3,000 RPMs for exceptional application speed4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatilityTrigger mode selection for easy one hand selection of speed settingsTri-LEDs for shadowless work area illuminationThe DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®’s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durabilityFlexible battery system: works with all MILWAUKEE® M12™ batteries

Rated Power : 542 Nm Fastening Torque, 745 Nm Nut-busting Torque

Availability : 1 Kg Without Battery

ETA approval for post-installed rebar connectionsInjection mortar system with approval for all relevant building materials.Maximum load absorption for much greater security.Approved service life of 100 years.Application in water-filled boreholes. The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, ma­sonry and for special applications.-– The ETA assessment for a service life of 100 years offers permanent safety for all applications.– The approved use in water-filled drill holes enables a wide range of applica­tions, even under harsh environmental conditions.– FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures.– The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths.– The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexi­bility of the system and thus allows for a broad range of applications.The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures.APPLICATIONSSteelwork constructionsTimber constructionsGuard railsFaçadesStaircasesStee

Number Of Flower : Injection Mortar

Material : Vinyl Ester Hybrid

Application : Steelwork Constructions,Timber Constructions

Polyester resin without approval for use in masonry.Can be used with anchor rods FIS A, internal threaded anchor FIS E and fischer anchor sleeves.The FIS P is the economical solution for anchorings in masonry that do not require approvals.The FIS P 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. This helps to reduce procurement costs.The fischer Injection mortar FIS P is a polyester resin mortar for the economical fixing of gratings, cantilevers and handrails in masonry which do not require approval. The FIS P is processed with the system components fischer threaded rod FIS A, fischer internal threaded rod FIS E together with the fischer injection anchor sleeves indoors and outside. Cartridges already opened can be reused by simply changing the static mixer. This saves time and money during installation.APPLICATIONSGratingsGatesHandrailsConsolesPipelines

Number Of Flower : Polyester Resin Mortar

Packaging : Cartridges

Application : Fixing Gratings, Cantilevers, Handrails In Masonry,Gratings, Gates, Handrails, Consoles, Pipelines

Economical wedge anchor for static loads uncracked concrete (carbon steel)Material, corrosion: Carbon steel, zinc-platedHead configuration: Externally threadedType of fastening: Pre-fastening, Through-fasteningMade from cold-formed carbon steel, zinc-plated to 5µmTwo embedment depths for a wide range of fastening thicknessesSetting mark for easy checking of correct installation depthRaised impact section prevents thread damage during installationPre-assembled to save timeApplicationsWide range of applications in uncracked concrete

Material : Carbon Steel, Zinc-plated

Pre-assembled plastic anchor for concrete and masonry with screw (carbon steel, countersunk head)Base materials: Concrete (aerated), Concrete (cracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)Head configuration: CountersunkApprovals / test reports: ETA, FireUnbeatable versatility – flexible embedment depth (approved at 50 mm and 70 mm) makes these plastic anchors suitable for a vast range of fastenings and base materialsMultiple versions available – choose from multiple screw heads and corrosion resistance options depending on your project’s needsTime-saving on the jobsite – these concrete plastic anchors arrive ready to use with the screw pre-assembled in the wall plugExtensive documentation available – see the technical data sheet for essential load, resistance, design and installation informationRainscreen/ventilated façades – fastening façade mounting brackets to concrete and masonryMetal fabrication – fastening handrails, balustrades, railings, window bars and other architectural metalwork to concrete and masonryFramed openings – countersunk screw ideal for fastening door and window framesSuitable for fastening fixtures up to 260 mm thick (60-310 mm anchor length available)

Economical manual-set drop-in anchor in metric standard sizes (without lip)Environmental conditions: Dry indoorApprovals / test reports: N/AMaterial, corrosion: Carbon steel, zinc-platedFeaturesNo collar – drop-in anchor can be set at greater depthNo damage to inner thread when tapping in or setting“Intelligent” stepped expansion piece adapts to base material hardnessVisual check for correct setting when used with Hilti HSD-G and HSD-B setting toolsFastening MEP installations using bolts or threaded rods, e.g. suspended supports for pipes, ducts, sprinkler systems, etc.Fastening diamond core drilling rigs to concrete

Number Of Flower : Manual-set Drop-in Anchor

Material : Carbon Steel, Zinc-plated

High-performance anchor rod for injectable hybrid/epoxy anchors (5.8 carbon steel)Material, corrosion: Carbon steel, zinc-platedEnvironmental conditions: Dry indoorBase materials: Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)

Number Of Flower : Anchor Rod

Material : Carbon Steel

Ultimate-performance injectable epoxy mortar with approvals for rebar connections and heavy-duty anchoringBase material condition: Dry, WetApprovals / test reports: ETA, FireSeismic loading: YesUltimate performance and model code-compliant design for virtually any concrete-to-concrete and steel-to-concrete connections – ETA assessment for anchoring inc. C1 and C2 seismic and ETA for rebar inc. fire and seismicThe first epoxy mortar qualified according to EAD 332402-00-0601 for concrete-to-concrete connections – rigid connections can now be designed and executed with post-installed rebars without splices according to the newest design method TR069Suitable for the toughest jobsite conditions – works even in diamond-cored, wet or underwater holes, extremely deep injections, large diameters and at temperatures down to -5°C / 23°FImproved bond strength in the most demanding applications – such as cracked concrete and seismic C2 conditionsEasier to specify and order – use PROFIS Engineering to design baseplate connections and PROFIS Rebar to design concrete-to-concrete connections according to EC2, TR069 or the Hilti Design MethodStructural connections with post-installed rebar (e.g. slab extensions, wall/column connections, stairs, foundations, etc.)Structural renovation of buildings, bridges and other civil works, retrofitting and re-strengthening of concrete membersAnchoring structural steel connections (e.g. steel columns, beams, etc.)Fastening structural baseplates, including in cracked concrete and challenging seismic conditionsFastening in natural stone and wood, including GLT and CLT made from spruce, pine or fir

Number Of Flower : Epoxy Anchor

Material : Epoxy