Cbs Technologies Pvt. Ltd. Patparganj, Delhi

Reduces the friction between wire and die as well as heat removal at the die ensuring the die life enhancement to more than double. Reduces the consumption of lubricant oil. Lubricant quality is maintained through out the use of the oil by removing the material every day. Removal of suspended particles reduce the rate of the chemical reactions which break down the lubricants and lead to poor wire finish.

Vermi-composting: The process by which worms are used to convert organic materials (usually wastes) into a humus-like material known as vermi compost. The goal is to process the material as quickly and efficiently as possible. Cost Effective practice of creating homemade high nutrient rich organic fertilizer from organic waste.

Whole structure is made of mild steel (MS) angles, rectangular pipes & strips mounted on 10” four wheels made of solid rubber. Four partition wall panels and floor are made of ply core sandwiched by FRP. Four urinals (made of FRP) attached with sludge tank.

A YAMA pump uses the meshing of gears to pump fluid by displacement. YAMA pumps are positive displacement . YAMA pump is designed to handle two liquids simultaneously without mixing with each other. As the gears rotate they separate on the intake side of the pump, creating a void and suction which is filled by fluid. The fluid is carried by the gears to the discharge side of the pump, where the meshing of the gears displaces the fluid. The mechanical clearances are small. The tight clearances, along with the speed of rotation, effectively prevent the fluid from leaking backwards.The rigid design of the gears and housing allow for very high pressures and the ability to pump highly viscous fluids. A Viton seal prevents the mixing of two different fluids used at a same time.

Purifier centrifuge to remove free water solid contamination plus ultra high vacuum dehydration system for moisture removal. It is trolley mountedweather proof with flow rate from 500 to 6000 LPH and suitable to remove solid, moisturefree water and gas contamination.

Turbine oil centrifuging filtration machine is capable to remove all the three types of contaminations (Solid, moisture and gases). 100% consumable free centrifuge is used for the removal of solid contamination as well as for free water. Sludge holding capacity varies from1- 10 Kgs.

The plant is suitable for treating transformer oil and it will make it new with the help of reclamation bags and than by heating it and passing it through specially designed filter and subjecting it to ultra high vacuum treatment which dehydrates and degasifies the oil to achieve following improvements after filtration as per IS 335-1993 for new transformer oil purification and IS 1866 for used transformer oil filtering.

Failure of transformer to due high moisture content in the insulating paper and the insulating oil is one of the major causes of transformer failures today. If there is presence of a leakage, moisture can enter into the system in the form of water or humidity. Small oil leaks, especially in the oil cooling piping, will also allow moisture ingress

This single stage transformer oil filtration plant is suitable for treating used transformer oil by first heating it and then passing it through specially designed filter and then subjecting it to vacuum treatment which dehydrates and degasifies the oil to achieve the desired improvements after filtration as per IS 335-1993 for new transformer oil purification and IS 1866 for used transformer oil filtering. It has single stage degasification to improve the desired parameters required for purification of used transformer oil.

This double stage oil filtration plant is suitable for treating used transformer oil by first heating it and then passing it through specially designed filter and then subjecting it to vacuum treatment which dehydrates and degasifies the oil to achieve the desired improvements after filtration as per for new transformer oil purification for used transformer oil filtering.Trolley Mounted Degassing Chamber (Double Stage Degasification) Heaters Coarse Filter (Consumable)

This double stage oil filtration plant is suitable for treating used transformer oil by first heating it and then passing it through specially designed filter and then subjecting it to vacuum treatment which dehydrates and degasifies the oil to achieve the desired improvements after filtration as per IS 335-1993 for new transformer oil purification and IS 1866 for used transformer oil filtering.rolley Mounted Degassing Chamber (Double Stage Degasification) Heaters Coarse Filter (Consumable)

This single stage transformer oil filtration plant is suitable for treating used transformer oil by first heating it and then passing it through specially designed filter and then subjecting it to vacuum treatment which dehydrates and degasifies the oil to achieve the desired improvements after filtration as per IS 335-1993 for new transformer oil purification and IS 1866 for used transformer oil filtering.Magnetic Strainer Degassing Chamber (Single Stage Degasification) Heaters Coarse Filter

It improves the bargaining position of farmers. Sometimes farmers sell at very low prices during the harvest season because they cannot store or preserve their surplus products. Dried products improve family nutrition because fruits and vegetables contain high quantities of vitamins, minerals and fiber. By use of this dehydrator, the drying process is made 5 times faster than normal sun drying procedure resulting in substantial weight reduction.

The plant is suitable for treating transformer oil and it will make it new with the help of reclamation bags and than by heating it and passing it through specially designed filter and subjecting it to ultra high vacuum treatment which dehydrates and degasifies the oil to achieve following improvements after filtration as per IS 335-1993 for new transformer oil purification and IS 1866 for used transformer oil filtering.

A steam trap is a device used to discharge condensate and non-condensable gases with a negligible consumption or loss of live steam. The Nozzle System is a continuous flow VenturiNozzle steam trapping device. VenturiNozzle System has no moving parts to wear out and fail open. The Trap work by using the difference in density between steam and condensate. A wire mesh is used to prevent the dust particles reaching the nozzle and choke it.

It improves the bargaining position of farmers. Sometimes farmers sell at very low prices during the harvest season because they cannot store or preserve their surplus products. Dried products improve family nutrition because fruits and vegetables contain high quantities of vitamins, minerals and fiber.

in combination with the frequently very high temperature of the quench oil, the above contaminants will accelerate the decomposition of the oil and resin-like deposits will form. This will, in turn, severely reduce the efficiency of the oil coolers, the aqua-alarm system and the quenching process in general.

High performance quench oil must have oxidation resistance or low sludge formation, be non-staining, an elevated flash point and have acceptable heat transfer characteristics. Contamination of quench oils is a very serious problem in most cases. etter quality surface finish of the part (no blackening effect or cracking) Reduced post quenching treatment of parts. No loss of productiondue to manual cleaning of quench oil tanks.

This is a portable system for transformer oil cleaning and filtration, based on centrifuge technology. It is a 100% consumables free filtration system. The system houses as standard equipment, mainly gear, pump, motor, starter, several sensing and indicating equipments and centrifuge. The user has a choice to go for fitment of additional optional accessories like heating chamber, flame proof motor etc. at extra cost.

It is able to give out the result within 45 sec. An optical fiber cable goes along with the counter to connect the device to a PC or display screen to transfer data. It can be widely applied to various kinds of oil, such hydraulic oil, lubricant oil, gearbox oil, insulating oil (transformer oil), etc. Due to its small size and light weight, it can be easily installed on machines which consist of hydraulic system or lubricant circuit, etc. Therefore, the real time monitoring of the oil quality will be available.

Purifier centrifuge to remove free water solid contamination plus ultra high vacuum dehydration system for moisture removal. It is trolley mountedweather proof with flow rate from 500 to 6000 LPH and suitable to remove solid, moisturefree water and gas contamination.

High performance quench oil must have oxidation resistance or low sludge formation, be non-staining, an elevated flash point and have acceptable heat transfer characteristics. Contamination of quench oils is a very serious problem in most cases.

This is a portable system for transformer oil cleaning and filtration, based on centrifuge technology. It is a 100% consumables free filtration system. The system houses as standard equipment, mainly gear, pump, motor, starter, several sensing and indicating equipments and centrifuge. The user has a choice to go for fitment of additional optional accessories like heating chamber, flame proof motor etc. at extra cost. Magnetic Strainer Degassing Chamber Heaters

Centrifugal oil cleaner is a mechanical device, which purifies oil by centrifugal force action, many many times more effectively than any other filtration method so far known in the world. Remove paper filters permanently. Extends oil life Minimizes wear and tear of engine Increases engine life.