Deaerating Tank Dealers in Delhi

Spray type deaerators (tray type deaerators) are used to remove dissolved gases from the boiler feed water to enable production of high quality steam for power generation and process requirement. We have designed, manufactured and supplied as per ASME, HEI, and IS code of practice, more than 245 deaerators from 6 TPH to 595 TPH and feed water temperature at the outlet of deaerator ranging from 105 degrees Celsius to 182 degrees Celsius, to all boiler manufactures and also to the power industries in India and abroad. ADVANTAGE OF DEAERATION: To reduce internal waterway corrosion To improve boiler efficiency Reliable means of assisting with the recovery of both High Pressure (HP) and Low Pressure (LP) condensate recovery Cold water feed to the boiler is not conductive to high efficiency Reduce the cost of chemical treatment Its first job will be to reduce O2 and Co2 These functions will cut down the amount of phosphate additive and eliminate the need for sulphate or hydrazine additives. This will also reduce the amount of blowdown Almost 90% of dissolved O2 will be removed by heating the water to saturation temperature. Remaining O2 will be removed by deaeration Condensate is prone to re-contamination upon cooling. Both Co2 and O2 can re-enter water. Consequently the returns are directed through the deaeration section

We offer deaerator tank, which is a device for air removal. This system is widely used for the dissolved gases (an alternate would be the use of water treatment chemicals) from boiler feedwater to make it non-corrosive. It typically includes a vertical domed deaeration section, which is mounted on top of a horizontal cylindrical vessel, that serves as the deaerated boiler feedwater tank

We are among the distinguished names in industry, engaged in offering Industrial Deaerators. These systems are used to remove the dissolved gases efficiently from boiler feed water that is a required essential process in any of the steam systems. In the feed water, dissolved oxygen causes localized corrosion in boiler tubes. Carbon dioxide is dissolved in water, which results in corrosive carbonic acid production and low pH levels, which causes acid attack in whole the boiler system in feed water. While low pH levels and dissolved gases in the feed water are easily removed or controlled through adding the chemicals. This thermally and economically efficient system is best to remove the gases mechanically. This whole mechanical process is called deaeration and that help in increasing the steam system's life dramatically.

Deaerating Tanks, Boiler Tubes, Boiler Retrofitting Service