we are offering wad assembling machine - 18 spindels
operation
web assembling
range
for diameters from 22 mm to 38 mm
output
360 caps per minute
installed power
1.5 h.p.
gross weight
700 kg (approx.)
floor area
2400 mm (l) x 600 mm (w) x 1200 mm (h)
we are offering wad assembling machine - 18 spindels
operation
web assembling
range
for diameters from 22 mm to 38 mm
output
360 caps per minute
installed power
1.5 h.p.
gross weight
700 kg (approx.)
floor area
2400 mm (l) x 600 mm (w) x 1200 mm (h)
Features
A. Main Circulation Pump independent drive for filling the top tank. (By customer requirement only)
B. Centralized Lubrication System.
C. Table drive belt system (for continuous feeding)
D. Side registration bars.
E. Cleaning Knife provided with 4 Sided edge.
F. Backless Coating
G. Automatic Sheet Counting device. (Optional)
H. Independent load table with detachment. (Optional)
I. Taper nose sheet controller (specially for Alu. Bend sheet) [Optional]
J. Roller Att. is provided at the front of feeder for Synchronizing of Coating with Printing.
K. Fine Pitch Studs are fitted in Roller Brasses for Maintaining Film Weight in Microns.
L. Datachable Knife Cover is fitted for Fast & Easy Cleaning of Knife.
M. Stencil Job can also be printed. (By customer requirement Only)
Features
A. Main Circulation Pump independent drive for filling the top tank. (By customer requirement only)
B. Centralized Lubrication System.
C. Table drive belt system (for continuous feeding)
D. Side registration bars.
E. Cleaning Knife provided with 4 Sided edge.
F. Backless Coating
G. Automatic Sheet Counting device. (Optional)
H. Independent load table with detachment. (Optional)
I. Taper nose sheet controller (specially for Alu. Bend sheet) [Optional]
J. Roller Att. is provided at the front of feeder for Synchronizing of Coating with Printing.
K. Fine Pitch Studs are fitted in Roller Brasses for Maintaining Film Weight in Microns.
L. Datachable Knife Cover is fitted for Fast & Easy Cleaning of Knife.
M. Stencil Job can also be printed. (By customer requirement Only)
Electrodes Control System
The upper electrode actuated by heavy duty 2-way cushioned pneumatic cylinders controlled be an electrically operated 4-way solenoid valve. Compressed air at 1.5 kgcm2 -5.6 kg.cm (20 to 80 psl) acting on the pneumatic cylinder provides electrode force. Machine provided with air filter, air lubricator, air pressure regulating valve, air pressure gauge.
Adjustment Of Electrodes Force
By air pressure regulating valve provide on the machine.
Adjustment Of Electrodes Stroke
By vertical adjustment of lower armplaten
Electrodes Control System
The upper electrode actuated by heavy duty 2-way cushioned pneumatic cylinders controlled be an electrically operated 4-way solenoid valve. Compressed air at 1.5 kgcm2 -5.6 kg.cm (20 to 80 psl) acting on the pneumatic cylinder provides electrode force. Machine provided with air filter, air lubricator, air pressure regulating valve, air pressure gauge.
Adjustment Of Electrodes Force
By air pressure regulating valve provide on the machine.
Adjustment Of Electrodes Stroke
By vertical adjustment of lower armplaten
We are offering redraw press.
The machine is specially designed for high speed production of deep draw caps with the following
features:-
cap feeder device
reverse redraw
twin cavity die set
carbide tool
in - build pneumatic die cushion
We are offering redraw press.
The machine is specially designed for high speed production of deep draw caps with the following
features:-
cap feeder device
reverse redraw
twin cavity die set
carbide tool
in - build pneumatic die cushion
Specification
Type
Air operated stationary press type sportprojection welders with pneumatic cylinder mounted directly on the upper arm.
Welding Transformer
Welding current adjustable from 50 to 100 % by means of a tap switch.
Cooling System
Transformer, Electrode holders, welding electrodes and thyristors are water cooled.
ElectrodesDies Toolings
Machine can be provided with custom-designed spot welding Electrodeprojection welding dies to suit the individual application, and suitable jigs and fixtures for holding, guiding and indexing of the work-piece as required at extra cost.
Specification
Type
Air operated stationary press type sportprojection welders with pneumatic cylinder mounted directly on the upper arm.
Welding Transformer
Welding current adjustable from 50 to 100 % by means of a tap switch.
Cooling System
Transformer, Electrode holders, welding electrodes and thyristors are water cooled.
ElectrodesDies Toolings
Machine can be provided with custom-designed spot welding Electrodeprojection welding dies to suit the individual application, and suitable jigs and fixtures for holding, guiding and indexing of the work-piece as required at extra cost.
we are offering hand feed metal decorating press.
specifications
max. sheet size
686 x 915 mm
(27 x 36)
min. sheet size
458 x 559 mm
(18 x 22)
plate size
838 x 953 mm
(33 x 37 12)
running speed
1800 phr.
power required
5 h.p
we are offering hand feed metal decorating press.
specifications
max. sheet size
686 x 915 mm
(27 x 36)
min. sheet size
458 x 559 mm
(18 x 22)
plate size
838 x 953 mm
(33 x 37 12)
running speed
1800 phr.
power required
5 h.p
Specification
1.
Size
1025 x 210 mm
2.
Main Rubber Roller
222 mm Dia.
3.
Steel Roller
216 mm Dia.
4.
Transfer Roller
222 mm Dia.
5.
Chilled Roller
210 mm Dia.
Specification
1.
Size
1025 x 210 mm
2.
Main Rubber Roller
222 mm Dia.
3.
Steel Roller
216 mm Dia.
4.
Transfer Roller
222 mm Dia.
5.
Chilled Roller
210 mm Dia.
Diamond Engg. Works (regd) India is Retailer of Nippon Type Metal Decorating Press, Hand Feed Metal Decorating Press, Coating Machine, Varnishing Machine, Projection Welding Machine, Spot Welding Machine, Wad Assembling Machine, Redraw Press, Side Embossing Machine, Side Chamffering Machine from Delhi.
Reviews & Ratings
Write a Review
Post Free Ad