Divine International Sadar Bazar, Delhi

Number Of Flower : Bedroom Furniture

These Water distillers produce highly treated and disinfected water for laboratory usage. The distillation process removes minerals and microbiological contaminants and can reduce levels of chemical contaminants. A water distiller works by boiling water into water vapour, condensing it and then returning it to its liquid state. It is collected in a storage container. Made of heavy gauge stainless sheet inside and outside, with immersion type heaters. The still provides continuous supply of pyroxene free distilled water and is equipped with brackets for wall mounting plug and cord and connector. Available in following capacities:1) 2 Ltr/hour (wattage 2KW)2) 4 Ltr/hour (wattage 4KW)3) 6 Ltr/hour (wattage 4.5KW)4) 8 Ltr/hour (wattage 6KW)

SS body,wall type or table type. Fitted with heavy duty elements. Available in various capacities from 2 Ltr/hour to 20 Ltr/hour  

This bath is suitable to maintain constant desired temperature for heating flasks in Chemical Laboratories. Bath is double walled inside made of stainless steel & outer body made of mild steel sheet painted with attractive Epoxy coated. The gap between the walls is filled with glass wool to minimize the loss of temperature. The stainless steel nozzles are provided one for inlet and second for over flow of water. The top of the bath has concentric rings. Available in following sizes:a) 325*250*100 mm (6 holes of 3" dia.)b) 325*300*100 mm (9 holes of 3" dia.)c) 425*325*100 mm (12 holes of 3" dia.)Also available in single wall

A great portable equipment for measuring pH, mV(ORP), Conductivity, temperature, TDS, Dissolved Oxygen (DO), Salinity and turbidity.pH Range: 0 - 14 pH Resolution: 0.01pH Accuracy: ±0.01 pH ±1 digit Temp Compensation: 0-100°C (Manual) Calibration Manual mV (ORP) Range: 0 to ±1999mV Resolution: 1mV Accuracy: ±1mV ±1 digit Conductivity (EC) Range: 0 to 1000 mmho in 5 ranges Resolution: 0.01 umho Accuracy: ±0.5% FS±1 digit Cell Constant: Adjustable (0.4 to 1.5) Reference Temp.: Adjustable (25°C) Temperature: 0 to 100° C Resolution: 0.1° C Accuracy: ±0.5° C ± 1 digit TDS Range: 0 to 10,000 mg/litre Resolution: 10 mgs/litre Accuracy: ±1% FS ±1 digit DISSOLVED OXYGEN (O2) Range: 0 to 20 ppm Resolution: 0.1 ppm Accuracy: ±0.2 ppm ±1 digit Temp. Comp.: 10° C to 50° C (Manual) DO Sensor Gold/Silver Amperometric Calibration Manual SALINITY Range: 0 to 40 ppt Resolution: 0.1 ppt Accuracy: ±0.5% ±1 digit TURBIDITY Range: 0 - 100 JTU Resolution: 1 JTU Accuracy: ±3% FS ±1 digit Sample size: 30 mm glass tube Light: 6.8 V Tungston lamp Detector: Photodiode GENERAL Display 3 1/2 digit (LCD) Operation Temp. 0° to 50° C Housing Materials ABS briefcase Power Supply 230 V ±10%, 50 Hz AC, 9V Battery (Dry cell) Standard Accessories Include the following:pH electrode, Conductivity/TDS/Salinity probe , Temp. probe, DO probe, Set of DO membranes, Test tube for turbidity (3)

The Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage. Available in following capacities: 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml  

Voltmeters Or Ammeters (Round Type MO65)   Voltmeters or ammeters in any voltage or current range available in round 65mm dia. Available both moving iron type or moving coil type.  

The outer chamber is made of thick gauge Mild Steel while inner is made of 304 grade Stainless Steel. Lid is made of Mild Steel with inside lined with S.S. for double protection. The unit has Radial Locking arrangement for the lid. Provided with built-in safety valve, pressure guage, pressure release valve. Pressure is adjustable from 5 psi to 20 psi ± 3 psi. To operate 220 volts single phase 50 cycles. Working Temperature : 121° CStandard Controls:1) Double safety radial locking arrangement. 2) Stainless steel steam release valve. 3) Spring loaded safety valve of SS(grade SS-304) 4) Water inlet and water outlet valves. 5) Water level indicating gauge glass with SS guard. 6) Pressure guage. 7) Foot paddle lifting device.8) Electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve. Available in following sizes (Working Chamber):Height X Dia 450mm X 250mm (22 liters)500mm X 300mm (50 liters) 550mm X 300mm (78 liters) 600mm X 450mm (98 liters)750mm X 550mm (152 liters)Optional Accessories :1) Automatic Pressure Control Switch2) Automatic Water Cut-off Device3) Temperature Indicator (Dial Type)4) Mechanical Timer with Alarm System5) Digital Temperature Indicator

These are double walled cylindrical units with outer made of M.S. sheet duly enamel painted and Inner made up of heavy gauge S.S. Sheet. Gap between the two walls is duly filled with high grade glass wool to avoid thermal loss. Temperature range from 50 ° C to 150 ° C is Controlled by heavy duty thermostat with an accuracy of ± 1 ° C. It is capable of withstanding a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 volts A.C. supply. But without Vacuum pump. Available in following sizes:a) 200 x 200 mm b) 250 x 250 mmc) 250 x 300 mm d) 300 x 300 mm e) 300 x 500 mm

These Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vacuum desiccators can hold vacuum up to 740mm of Hg for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self-lubricating PTEE plug. This plug works three way i.e. vacuum creation, shutting off & vacuum releasing.   Available in following sizes (Inner Dia):150mm, 200mm, 250mm, 300mm

Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus. Size 375X350X130mm

These containers can be used for collecting a wide range of samples of sputum, urine etc. Moulded in polypropylene these container have excellent contact clarity and the cap has built in seal that makes it completely leak proof. 

This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this rack can be used for tubes of ¢30mm, ¢20mm, ¢17mm & ¢12mm

Insulation Tester (Meggers) Transistorised     These have been designed with a view of stronger and rugged construction of individual components, which have been tested by us for last so many years, and thus ensuring longer life of the instrument. The size and weight of this model has been considerably reduced with a view of making the instrument more handy. The indicating Instrument is specially protected seperately in a moulded case to prevent damages from dust at the time of servicing. The indicating instrument has knife edge pointer and Anti-parallax mirror scale for ensuring accurate readings. Single person operation push button control, no troublesome cranks to turn, usage of standard 1.5 volts pencil cells are all the special features.ACCURACY : (+/-)5% of indicated value. WORKING PRINCIPLE : A push pull oscillator is used to convert DC voltage to AC, which is stepped up and further rectified to give the test voltage which is DC. A sensitive movement is used to detect the change in current due to insertion of resistance in the circuit. Available in various ranges from 10 to 500 Mega Ohms.

Used for determining the flakiness index of aggregates. It consists of a frame with a sliding panel. The panel has slots of different standard lengths and widths accurately cut.  

Thermal Stability Test Apparatus is used to measure/ check Thermal stability of PVC insulation & sheath of Electric cables as per IS:5831.Measures Thermal stability time in minutes required to change the pH value of 5 to 3 of a universal indicating pH paper placed in a glass tube containing sample and heated in a thermostatically controlled heating chamber at specified temp. of 200°C ±0.5°C.New Model incorporates a specially designed heating block which eliminated use of expensive silicone oil as in a conventional model.

This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6-place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the base has corresponding hemispherical well. It also has six vertical pins fro drying tubes. Another option available in this section is, a test tube stand in which all the holes in the top plates can hold 25mm dia tubes.  Available for following two sizes of tubes:1) 16mm & 25mm Ø Tubes2) 25mm Ø Tubes

This transparent polypropylene cap for Test Tubes Proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leak proof one. Suitable for Test Tube ø 25mm

These Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation. Available in following two sizes:1) 140X120X110mm2) 160X160X160mm

A fairly handy instrument for taking quick readings for the hardness of tablets. It is made of brass turned parts. Heavily chrome plated the scale is 0 to 20KG. The index mark and division is in reading . Scale is adjustable for zero setting as per size of the tablets.  

The disintegration test is performed on the tablets by moving them up and down in water kept at 37°C. Built in a MS cabinet which houses a geared motor that moves the vertical shaft up and down by 7.5 cms at a speed of 30 dips per minute. On the upper end of the shaft is fillted a horizontal strip with a clamp. This clamp holds a glass vessel open at both ends with SS wire gauge and rubber rings at the lower end. This glass vessel dips in water when the instrument starts working. A thermostatically controlled hot plate is fitted on top of the cabinet. It holds a glass beaker of 1000ml filled with water. Temperature is maintained at 37°C. Available in single and double basket.  

Made of Polypropylene, these Connectors are basically pipe-like structures in T & Y shapes with ringed edges. These are used for connecting tubes to each other. The edged prevent leakage & Slippage. Available in 6mm and 8mm.Material: Polypropylene  

Monocular body, tube inclinable up to 90 degrees. Mechanical tube length 160mm. Plain square stage of 120 x 120mm with two stage clips. Fitted with double lense condenser N.A.1.2 with iris diaphragm and swing out filter holder. Plano concave mirror in fork mount. Triple revolving nose piece for quick change of magnification with accurate click stop for perfect parafocal alignment. Eye Pieces uygenian 10x & 15x. Parafocal achromatic objectives 10 x 45x/40x(S.L.) having total magnification 100x - 600x/675x . Complete in Thermocol Box.  

For determining Stripping Value of bitumenous mixes having aggregate size 1.0mm to 75 microns.A circular tray rotates in a vertical plane at a rate of approximately 100 r.p.m. by an eletrical geared motor. 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 90° to each other with their mouths towards centre of the tray.A time switch is provided. Suitable for operation on volts A.C. single phase.

These Storage Boxes, made of Polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in two different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.