Dp Engineers Pandav Nagar, Delhi

zener barrier (series mtl7706/7787) series mtl7706/7787 zener barrier intrinsically safe barriers for hazardous locations the mtl7706/7787 is an intrinsically safe (is) shunt-diode barrier that can be used to communicate with and provide isolations for certain dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres. product applications electrically isolates pressure and level transmitters from unregulated circuits for intrinsically safe applications modeldescription mtl7706intrinsically safe zener barrier. mtl7787intrinsically safe zener barrier. specifications transmitter voltage:16.2 v @ 20 ma with 250ω load (negative w.r.t. Earth); 11.0 v @ 20 ma with 500ω load (negative w.r.t. Earth). safe area output:4 to 20 ma. load resistance:0 to 500ω. power requirement:20 to 35 vdc w.r.t. Earth. accuracy:±2 µa under all conditions. led indicator:green: power indication. temperature limits:operating: -4 to 140°f (-20 to 60°c); storage: -40 to 176°f (-40 to 80°c). humidity:5 to 95% rh. terminals:accommodate up to 2.5 mm² stranded or single-core. safety description:28 µv, 300ω, 93 ma. weight:4.9 oz (140 g). agency approvals:see table on catalog page. features approved for use in hazardous areas related products series 608 intrinsically safe differential pressure transmitter series 608 intrinsically safe differential pressure transmitter series pblt2 & pbltx submersible level transmitter series pblt2 & pbltx submersible level transmitter series sblt2 & sbltx submersible level transmitter series sblt2 & sbltx submersible level transmitter series is626 intrinsically safe pressure transmitter series is626 intrinsically safe pressure transmitter series isdp intrinsically safe differential pressure transmitter series isdp intrinsically safe differential pressure transmitter series hht hazardous area humidity/temperature transmitter series hht hazardous area humidity/temperature transmitter color : blue condition : new type : zener barrier raw material : abs brand name : dwyer usa material : abs use : electrically isolates pressure and level transmitters from unregulated circuits for intrinsically sa certification : yes

Yellow Cooling Pad Product Description As a pioneer name of the industry, we are enormously immersed in offering to our clienteles an extensive variety of Cellulose Paper cooling Pads to our honorable clients. Offered consignment of pad is reviewed sternly on multiple standards prior getting delivered at the premises of our clients. Also, these offered pads could be acquired from us at market leading rates in multiple customized provisions. Features: Durable Fine finish Precise design  

Size : 1200mmx1800mm, 900mmx1500mm

Number Of Flower : Air Cooled, Cooling Pad

Cover Material : Cellulose Paper

Shape : Rectangular, Square

Application : Air Cooler, Green House, Poultry

Feature : Durable, Dust Resistance, Eco Friendly, Fine Finished, High Cooling Eficiency, Ligh Weight, Waterproof

Effect : Water Cooling Pad

Brand Name : D.P.Engineers

Condition : New

Wireless Wi Fi Data Logger (Series DW-WIFI) wireless wi fi data logger series dw-wifi wireless wi-fi data logger measures temperature/humidity, integral lcd the series dw-wifi wireless wi-fi data logger measures and records up to 1,000,000 temperature and/or humidity readings and shares the data with any pc or server on the same wi-fi network. If the wi-fi connection is lost, the sensor will continue to store any records until it can regain communication with the network. The downloadable windows® based software allows users to set high/low alarms, sampling rate, and the temperature scale. product applications environment monitoring weather monitoring building/site monitoring modeldescription dw-wifi-twireless wi-fi data logger with integral temperature sensor dw-wifi-tcwireless wi-fi data logger with remote thermocouple probe (probe included, but not shown) dw-wifi-thwireless wi-fi data logger with integral temperature and humidity sensor dw-wifi-t-hahigh accuracy wireless wi-fi data logger with integral temperature sensor dw-wifi-th-hahigh accuracy wireless wi-fi data logger with integral temperature and humidity sensor dw-wifi-tpwireless wi-fi data logger with remote temperature probe dw-wifi-tp-hahigh accuracy wireless wi-fi data logger with remote temperature probe specifications memory size:1,000,000 readings; 500,000 each for dw-wifi-th(-ha). sampling mode:continuous recording. sampling rate:selectable from 10 s to 12 hrs. transmission rate:selectable from 1 min to 24 hrs. temperature limits:-4 to 140°f (-20 to 60°c). power requirements:3.7 v lithium ion battery, installed functional, factory replaceable (cable for charging included). alarms:programmable high/low. interface:wi-fi connection. probe length:dw-wifi-tp: 11.8" (30 cm); dw-wifi-tc: 59" (150 cm). weight:7.2 oz (204 g). agency approvals:ce, rohs. features continues to record values even if wi-fi connection is lost able to record up to 1,000,000 data points, which can be downloaded to a pc large lcd allows users to view data directly from unit related products series dw-usb compact usb data logger series dw-usb compact usb data logger model dw-usb-lite mini temperature data logger model dw-usb-lite mini temperature data logger series mtl20/30 miniature usb data logger series mtl20/30 miniature usb data logger model dw-usb-rt real-time usb data logger model dw-usb-rt real-time usb data logger series dw-usb-lcd compact usb data logger with display series dw-usb-lcd compact usb data logger with display model dw-usb-1-ht high temperature usb data logger model dw-usb-1-ht high temperature usb data logger Material : Plastic Certification : Yes Display Type : Digital Features : Light Weight Type : Series DW-WIFI Wireless Wi-Fi Data Logger Weight : 7.2 Oz (204 G). Usage : Environment Monitoring Warranty : 1Year Power Source : Battery, Factory Replaceable (cable For Charging Included). Color : Black Brand Name : DWYER USA Voltage : Factory Replaceable (cable For Charging Included).

Number Of Flower : Humidity Data Logger

Material : Plastic

Certification : Yes

Availability : 200-300gm

Country of Origin : 6-9VDC

Application : Humidity Monitoring

Display Type : Digital

Power Source : Battery, Electric

Feature : Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance

Total Carbohydrate : 1Year

Automation Grade : Automatic, Fully Automatic, Manual, Semi Automatic

winters digital pressure gauge dpg206  winters dpg206 - 30"/0/100 psi gauge  applications: ideal for commercial and industrial applications in both test measurement and general purpose installations description & features:   simple 2 button operation reset to zero feature backlight turns on when on/off button is pressed option for display to remain continuously on continuous peak pressure indication option 316l welded diaphragm seal rubber boot is standard asme b40.100 compliant rohs compliant +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi) 1 year warranty  .

Number Of Flower : Digital Pressure Gauge

Material : Alloy Steel, Stainless Steel

Shape : Round

Certification : Yes

Display Type : Digital

Connection : Bottom Connection

winters canada digital pressure gauge dpg207 product specification connection1/4" npt 304ss measuring range(mm)30"/0/150 psi brandwinter canada model no.dpg207 accuracy+-0.5% case size2.5" (63mm) case materialabs (ip64) rubber bootsilicone rubber (ip65) lcd display2"x3/4" (48mmx16mm) minimum order quantity1 number product description winters canada digital pressure gauge dpg207 applications: ideal for commercial and industrial applications in both test measurement and general purpose installations description & features: simple 2 button operation reset to zero feature backlight turns on when on/off button is pressed option for display to remain continuously on continuous peak pressure indication option 316l welded diaphragm seal rubber boot is standard asme b40.100 compliant rohs compliant +/- 1% accuracy (+-/ 0.5% optional for gauges up to 5,000 psi) 1 year warranty.

Number Of Flower : Digital Pressure Gauge

Material : Stainless Steel

Shape : Round

Certification : Yes

Display Type : Digital

Connection : Bottom Connection

Connection : 1/4

Brand Name : Winter Canada

Accuracy : +-0.5%

window blower cpnb 20 rotation : clockwise , bore size in mm : 12.70/15 wi/woi : wi, dia with ring : 228 dia without ring : 215 total height : 119, no of blades : 70

Number Of Flower : Blower Impeller

Material : Metal, Plastic

Shape : Round

Application : Industrial Use

Availability : 250gm

Feature : Fine Finishing, Good Quality, Strong Strength

Country of Origin : India

window blower cpn 666 b rotation : clockwise , bore size in mm : 12/12.70, wi/woi : both , dia with ring : 218, dia without ring : 208, total height : 100, no of blades : 49

Number Of Flower : Blower Wheel

Material : Aluminum, Cast Iron, Steel

Shape : Round

Application : Industrial

Feature : Fine Finish

Condition : New

Finishing : Non Polished

Electric Current Type : AC

Blade Material : Cast Iron, Plastic, Stainless Steel

Pressure : High Pressure, Low Pressure, Medium Pressure

Country of Origin : India

Brand Name : D.P.Engineers

window blower cpglo 611 rotation : clockwise bore size in mm : 12.70 wi/woi : wi, dia with ring : 206, dia with out ring : 203 total height : 103, no of blades : 42

Number Of Flower : Blower Wheel

Material : Aluminum, Cast Iron, Steel

Shape : Round

Application : Industrial

Condition : New

Electric Current Type : AC

Blade Material : Cast Iron, Plastic, Stainless Steel

Pressure : High Pressure

Country of Origin : India

Brand Name : D.P.Engineers

Material : Plastic

Window Blower CPG 477 Rotation : CLOCKWISE , Bore Size In MM : 12.70, WI/wO i : WI, Dia With Ring : 213, Dia Without Ring : 206, Total Height : 94, No Of Blades : 68

Number Of Flower : Blower Impeller

Material : Metal, Plastic, Stainless Steel

Shape : Round

Application : Industrial Use

Availability : 250gm

Feature : Anti Corrosive, Fine Finishing, Good Quality, Immaculate Finish, Robustness, Strong Strength

Finishing : Non Polished, Polished

Country of Origin : India

Window Blower CPG 471 Rotation : CLOCKWISE , Bore Size In MM : 12.70, WI/woi : WI, Dia With Ring : 213, Dia Without Ring : 206, Total Height : 95, No Of Blades : 37

Brand Name : D.P.Engineers

Country of Origin : India

window blower cpc 500 rotation : anticlockwise, bore size in mm : 12.70, wi/woi : wi, dia with ring : 236, dia without ring : 229, total height : 90, no of blades : 72

Number Of Flower : Blower Wheel

Material : Aluminum, Cast Iron, Steel

Shape : Round

Application : Industrial

Feature : Fine Finish

Condition : New

Finishing : Non Polished

Electric Current Type : AC

Blade Material : Cast Iron, Plastic, Stainless Steel

Pressure : High Pressure, Low Pressure, Medium Pressure

Country of Origin : India

Brand Name : D.P.Engineers

window blower a h 1 0 wb rotation : anticlockwise , bore size in mm : 12*, wi/woi : wi, dia with ring : 216, dia with out ring : 208, total height : 116, no of blades : 44   websites : www.dpengineers.in www.dpengineer.in www.dpengineers.co.in www.dpengineer.co.in www.dpengineersindia.com www.dpengineerindia.com www.dpengineersindia.in www.dpengineers.info www.dpengineer.info www.dp-engineers.com www.dpengineerindia.in www.dpengineersindia.net www.dpengineersdelhi.co.in www.dpengineersdelhi.com www.dpengineersdelhi.net

Number Of Flower : Blower Wheel

Material : Aluminum, Cast Iron, Steel

Shape : Round

Application : Industrial

Feature : Fine Finish

Condition : New

Finishing : Non Polished

Blade Material : Cast Iron, Plastic, Stainless Steel

Pressure : High Pressure, Low Pressure, Medium Pressure

Country of Origin : India

wht weather-resistant humidity transmitter (wht weather-resistant humidity transmitt) wht weather-resistant humidity transmitter series wht weather-resistant humidity/temperature transmitter compact housing, sintered filter the compact series wht humidity/temperature transmitter is designed to withstand the elements. A removable sintered filter protects the polymer capacitance sensor from solid objects that may come in contact with the transmitter. The transmitter is available with 4 to 20 ma or 0 to 10 vdc output signals for both temperature and humidity. This transmitter is ideal for measuring outside air temperature and humidity levels for air handling economizer applications. product applications air handling economizers air environment monitoring in agriculture or livestock cultivation houses model  description wht-310water-resistant humidity transmitter with sintered filter, 3% accuracy, 4-20 ma humidity output. wht-311water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 ma humidity and temperature output. wht-31awater-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 ma humidity output and 10k ω type iii, curve a temperature output. wht-320water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-10 vdc humidity output. wht-322water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 vdc humidity and temperature output. wht-32awater-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 vdc humidity output and 10k ω type iii, curve a temperature output. wht-330water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-5 vdc humidity output. wht-333water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-5 vdc humidity and temperature output. specifications relative humidity range:0 to 100% rh. temperature range:-40 to 140°f (-40 to 60°c). accuracy, rh:±3% 20 to 80% rh, ±4% @ 10 to 20%, 80 to 90%. accuracy, temp models with 4 to 20 ma :±0.9°f @ 72°f (±0.3°c @ 25°c) temp. Output: accuracy, temp models with passive :±0.4°f @ 77°f (±0.22°c @ 25°c). thermistor temp sensor: hysteresis, rh:±1%. repeatability, rh:±0.1% typical. temperature limits:-40 to 140°f (-40 to 60°c). storage temperature:-40 to 176°f (-40 to 80°c). compensated temperature range, rh:-4 to 140°f (-20 to 60°c). 4-20 ma loop powered models:power requirements: 10 to 35 vdc; output signal: 4 to 20 ma. 0 to 10 v output models:power requirements: 15 to 35 vdc or 15 to 29 vac; output signal:0 to 10 v @ 5 ma max. 0 to 5 v output models:power requirements: 10 to 35 vdc or 10 to 29 vac; output signal: 0 to 5 v @ 5 ma max. response time:15 s. electrical connections:removable screw terminal block. drift: voltage : power requirements: 15 to 35 vdc or 15 to 29 vac; output signal: 0 to 10 v @ 5 ma max. power : power requirements: 10 to 35 vdc or 10 to 29 vac; output signal: 0 to 5 v @ 5 ma max. type : wht weather-resistant humidity transmitter use : air handling economizers weight : 0.3 oz (8.5 g). certification : yes brand name : dwyer usa accuracy : 80 to 90%. condition : new usage : air handling economizers output : power requirements: 15 to 35 vdc or 15 to 29 vac; output signal: 0 to 10 v @ 5 ma max. temperature : -40 to 140°f (-40 to 60°c). application : air environment monitoring in agriculture or livestock cultivation houses

Number Of Flower : Humidity Transmitters

Shape : Rectangular, Square

Application : Humidity Monitoring

Certification : Yes

Availability : 0-2 Kg

Country of Origin : 0.3 Oz (8.5 G)

Condition : New

Power : 3 Watts Maximum

Accuracy : ±2% @ 10 To 90%.

Temperature : 0-40 Deg C

Automation Grade : Automatic, Semi-automatic

Brand Name : Dwyer

Application : Air Environment Monitoring In Agriculture Or Livestock Cultivation Houses

Application : Air Handling Economizers

Output : Power Requirements: 15 To 35 VDC Or 15 To 29 VAC; Output Signal: 0 To 10 V @ 5 MA Max

Weatherproof Immersion Temperature Transmitter (Series TTW) series ttw weatherproof immersion temperature transmitter pt100 rtd, pc programmable transmitter the series ttw immersion temperature transmitter combines three popular products into a single package. Our tbu series head mounted temperature transmitter is factory mounted into our a-709 enclosure. A pt100 rtd version of our te series is wired to the transmitter, giving insertion lengths up to 18". Each transmitter is factory programmed and calibrated to output a 4 to 20 ma signal proportional to the 32 to 212°f (0 to 100°c) temperature range. product applications immersion temperature sensing in hvac systems modeldescription te-tns-n044n-14thermowell, 4" length, 1/4" npt internal connection, 1/2" npt external connection, 304ss. te-tns-n064n-14thermowell, 6" length, 1/4" npt internal connection, 1/2" npt external connection, 304ss. te-tns-n094n-14thermowell, 9" length, 1/4" npt internal connection, 1/2" npt external connection, 304ss. te-tns-n124n-14thermowell, 12" length, 1/4" npt internal connection, 1/2" npt external connection, 304ss. ttw-104weatherproof immersion temperature transmitter, 4" probe length ttw-106weatherproof immersion temperature transmitter, 6" probe length ttw-108weatherproof immersion temperature transmitter, 8" probe length ttw-112weatherproof immersion temperature transmitter, 12" probe length ttw-118weatherproof immersion temperature transmitter, 18" probe length specifications temperature sensor accuracy:±3°f (±1.7°c). temperature limits:operating: -40 to 302°f (-40 to 150°c). sensor curves:pt100 rtd (te series curve d). temperature transmitter input range:-328 to 986°f (-200 to 530°c). output:two-wire 4 to 20 ma. output impedance:600 ω @ 24 vdc. power requirements:12 to 35 vdc. accuracy:±0.2% fs. temperature limits:-40 to 185°f (-40 to 85°c). response time: Condition : New Type : Weatherproof Immersion Temperature Transmitter Color : Grey Material : Painted Aluminum Housing. Voltage : 12 To 35 VDC. Power : 12 To 35 VDC. Warranty : 1year Power Source : 12 To 35 VDC. Certification : YES Accuracy : ±0.2% FS. Application : Immersion Temperature Sensing In HVAC Systems

Number Of Flower : Weatherproof Switch

Material : Painted Aluminum Housing.

Shape : Rectangular, Square

Certification : Yes

Application : Control Panels, Home Use, Plug Use, Power Supply

Feature : 4 Times Stronger, Easy To Use, Good Quality, Rigorous Quality, Safety Tested, Shocked Proof, Stylish Look

Total Carbohydrate : 1yr

Temperature : High Temperature, Low Temperature, Medium Temperature

Brand Name : Dwyer

Rated Voltage : 12 To 35 VDC.

Max. Voltage : 12 To 35 VDC.

Weatherproof Digital Pressure Gauge (Series WDG) series wdg weatherproof digital pressure gage ±0.5% fs accuracy, weatherproof, economic plastic housing the series wdg weatherproof digital pressure gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The wdg comes with 304l stainless steel wetted material for a wide range of compatible liquids and gases. calibration option available under accessories. we are in the process of discontinuing this series, the suggested replacement is series dpga/dpgb. product applications pneumatic draft measurement filter monitoring industrial outdoor hvac roof-top flow modeldescription wdg-01weatherproof digital gage, range 0-50 psig. specifications service:compatible liquids and gases. wetted material:304l ss. housing materials:fiberglass reinforced pp plastic. accuracy:±0.5% fs for ranges up to 1000 psig (68.94 bar); ±1% fs for 5000 psig (344.74 bar) range. long term stability:±0.05% fs/year. pressure limits:2x pressure range; burst pressure: 3x pressure range. enclosure rating:ip65. temperature limits:14 to 140°f (-10 to 60°c). thermal effect:0.04% fs/°c. size:2.5" od. process connections:1/4" male npt. display:4-digit lcd (1-1/4 x 5/8"). power requirements:3 v lithium metal battery, installed functional, user replaceable. battery life:2 to 3 years typ. weight:0.34 lb (0.15 kg). accessories model numberdescription nistcal-pg2nist traceable pressure calibration certificate for pressure gages under 1% accuracy. note: equal certs will be charged per units purchased. related products series dpg digital pressure gage series dpg digital pressure gage series dpga & dpgw digital pressure gage with 1% accuracy series dpga & dpgw digital pressure gage with 1% accuracy Diameter : 2.5 Size : 2.5 Shape : Round Material : Stainless Steel, 304L SS. Color : Black Certification : Yes Application : Compatible Liquids And Gases. Features : Easy To Fit, Perfect Strength Type : Weatherproof Digital Pressure Gauge Pressure : 2X Pressure Range; Burst Pressure: 3X Pressure Range. Display Type : Digital Condition : New

Number Of Flower : Digital Pressure Gauge

Material : Alloy Steel, Stainless Steel

Shape : Round

Certification : Yes

Display Type : Digital

Connection : Bottom Connection

Shape : Round

Material : Stainless Steel, 304L SS

Weather Resistant Humidity and Temperature Transmitter Series WHT Weather-Resistant Humidity/Temperature Transmitter Compact Housing, Sintered Filter The compact Series WHT Humidity/Temperature Transmitter is designed to withstand the elements. A removable sintered filter protects the polymer capacitance sensor from solid objects that may come in contact with the transmitter. The transmitter is available with 4 to 20 mA or 0 to 10 VDC output signals for both temperature and humidity. This transmitter is ideal for measuring outside air temperature and humidity levels for air handling economizer applications. Product Applications Air handling economizers Air environment monitoring in agriculture or livestock cultivation houses ModelDescription WHT-310Water-resistant humidity transmitter with sintered filter, 3% accuracy, 4-20 mA humidity output. WHT-311Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 mA humidity and temperature output. WHT-31AWater-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 mA humidity output and 10K Ω Type III, curve A temperature output. WHT-320Water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity output. WHT-322Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity and temperature output. WHT-32AWater-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity output and 10K Ω Type III, curve A temperature output. WHT-330Water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-5 VDC humidity output. WHT-333Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-5 VDC humidity and temperature output. Specifications Relative Humidity Range:0 to 100% RH. Temperature Range:-40 to 140°F (-40 to 60°C). Accuracy, RH:±3% 20 to 80% RH, ±4% @ 10 to 20%, 80 to 90%. Accuracy, Temp Models with 4 to 20 mA Temp. Output:±0.9°F @ 72°F (±0.3°C @ 25°C). Accuracy, Temp Models with Passive Thermistor Temp Sensor:±0.4°F @ 77°F (±0.22°C @ 25°C). Hysteresis, RH:±1%. Repeatability, RH:±0.1% typical. Temperature Limits:-40 to 140°F (-40 to 60°C). Storage Temperature:-40 to 176°F (-40 to 80°C). Compensated Temperature Range, RH:-4 to 140°F (-20 to 60°C). 4-20 mA Loop Powered Models:Power Requirements: 10 to 35 VDC; Output Signal: 4 to 20 mA. 0 to 10 V Output Models:Power Requirements: 15 to 35 VDC or 15 to 29 VAC; Output Signal: 0 to 10 V @ 5 mA max. 0 to 5 V Output Models:Power Requirements: 10 to 35 VDC or 10 to 29 VAC; Output Signal: 0 to 5 V @ 5 mA max. Response Time:15 s. Electrical Connections:Removable screw terminal block. Drift: Enclosure-ABS : Relative Humidity Range (%)-0 to 100% RH. Brand-Dwyer USA : Storage Temperature--40 to 176 Degree F (-40 to 80 Degree C). Enclosure Rating-Designed to meet NEMA 3S (IP54). : Weight-0.3 oz (8.5 g). Hysteresis-+/-1%.RH : Repeatability-+/-0.1% typical. RH Temperature Range (deg. Celsius)- -40 to 140 Degree F (-40 to 60 Degree C). : Response Time (s) 15 Related Products : Series AD Air/Duct Temperature Sensor Series MS Magnesense® Differential Pressure Transmitter : Series ADPS/EDPS Differential Pressure Switch

Number Of Flower : Temperature Transmitters

Material : ABS Plastic

Storage Condition : Head Mounted

Certification : Yes

Application : Industrial Automation

Country of Origin : 20v

Condition : New

Automatic Grade : Automatic, Semi Automatic

Power : 1-3kw

Power Source : Electric

Total Carbohydrate : 1year

Accuracy : 80 To 90%

Water Leak Detector The very affordable Series WD2 Detects Leaking Conductive Fluids and alarms to prevent the leak from creating costly damage. The WD2 relies on the electrical conductivity of water to change the resistance across the two contacts located at the base of the enclosure. Model WD2-BP2 is battery powered, provides audible alarm, LED visual alarm,and a SSR output.Also featured is a low battery warning. WD2-LP units are line powered and include a green power indication LED.Mounting bracket A-154 is perfect for use in leak pans where it is desired to raise the sensing level above the bottom of the pan to eliminate nuisance alarms. The bracket can be mounted to the bottom of the pan and the height of the WD2 adjusted anywhere up to 1.75 ¿¿ (44.5 mm).Or the bracket can be used to mount the WD2 to the side of the drip pan or any side wall at desired height. Specification: Electrical Rating :WD2-BP2:Pilot duty rating 250 mA @ 24 VDC maximum; WD2-LP: 1 A @ 24 VAC/DC, 1 A @ 120 VAC.Audible Alarm :BP Models:10 seconds on, 30 seconds off. LP Models: Continually on. None on D2 model.LED Alarm :BP Models: 10 seconds off, 30 seconds on. Two red LED’s; LP Models: Continually on. Eight red LED’s.Power Requirements :BP models: 3 V CR2450 lithium metal battery,installed non-functional, user replaceable;LP Models;11 to 27 VAC/DC.Power Consumption :BP Models: 0.9 mA steady state non-alarm, 3.0 mA during audible alarm, 2.4 mA during LED alarm; LP Models: DC power: 25 mA typical and 75 mA maximum, AC power: 30 mA typical and 85 mA maximum.Weight : WD2-BP2: 3.5 oz; WD2-LP: 4.3 oz; WD2-LP-D: 5.6 oz. Operation: Model WD2-BP2 is battery powered, provides audible alarm, red LED visual alarm, and a SSR output. When conductive fluid is detected, the audible alarm will turn on for 10 seconds followed by a 30 second visual alarm repeated until the unit no longer detects fluid. The SSR will change state from open to closed. When the battery gets low the WD2 gives a warning by turning on the visual and audio alarms.WD2-LP units require an 11 to 27 VAC/DC power supply. A green power LED illuminates when the unit has power. WD2-LP units provide audible alarm, red LED visual alarm, and either a SPDT or DPDT output. When conductive fluid is detected, the audible alarm and visual alarm will turn on and stay on. The relay will change state with open contacts going to closed and closed contacts going to open.Mounting: The unit is made to place on a horizontal surface where leaking fluid can build up. Mounting bracket A-154 is perfect for use in leak pans where it is desired to raise the sensing level above the bottom of the pan to eliminate nuisance alarms. The bracket can be mounted to the bottom of the pan and the height of the WD2 adjusted anywhere up to 1.75 ¿¿ (44.5 mm). Or thebracket can be used to mount the WD2 to the side of the drip pan or any side wall at a desired height.The A-154 includes one “U” bracket and two “L” brackets. For bottom mounting unscrew the body screws in the top of the WD2. Install the “L” brackets to the “U” bracket sides using the screws and nuts provided. Keep the screws loose for later adjustment of WD2 height. Place the “U” bracket on the top of the WD2 and line up the holes in the bracket with those in the body. The A-154 includes longer body screws that are used to now screw down both the bracket and the body top. The “U” bracket can be mounted in the up or down orientation but it must be mounted “down” to reach the full 1.75 ¿¿ height potential Condition : New,Type : Water Leak Detector,Usage : Water Leak Detection, Water,Color : Black Material : ABS Plastic,Power Source : Battery, User Replaceable; LPModels: 11 Brand Name : DWYER USA Warranty : 1Year Certification : YES

Number Of Flower : Water Leak Detector

Material : ABS Plastic

Certification : Yes

Feature : Accuracy, Alarm System, Durable, Easy To Use, Eco Friendly, Rechargeable, Stable Performance

Condition : New

Application : Water Leak Detection

Display Type : Digital

Power Source : Battery, User Replaceable; LPModels: 11

Total Carbohydrate : 1Year

Brand Name : Dwyer

Accuracy : ±.0002

Wall Mount Temperature Sensor (Series TE-E/N) Wall Mount Temperature Sensor Series TE-E/N Wall Mount Temperature Sensor Discrete Wall Mount Housing The Series TE-E/N Wall Mount Temperature Sensor provides a low cost temperature input for any building management system. With large vents in the housing for proper air flow, the sensor accurately measures the ambient temperature in hotel rooms or office buildings. Multiple mounting holes on the wall plate allow for mounting to numerous surfaces. Product Applications Room temperature monitoring Building automation ModelDescription TE-END-AEU Wall Mount Temperature Sensor, 10K Ohm Type III Sensor TE-END-B        EU Wall Mount Temperature Sensor, 10K Ohm Type II Sensor TE-END-C        EU Wall Mount Temperature Sensor, 3K Ohm Sensor TE-END-DEU Wall Mount Temperature Sensor, Pt100 Ohm RTD Sensor TE-END-E        EU Wall Mount Temperature Sensor, PT1K Ohm RTD Sensor TE-END-F EU Wall Mount Temperature Sensor, 20K Ohm Sensor TE-NND-ANA Wall Mount Temperature Sensor, 10K Ohm Type III Sensor TE-NND-BNA Wall Mount Temperature Sensor, 10K Ohm Type II Sensor TE-NND-CNA Wall Mount Temperature Sensor, 3K Ohm Sensor TE-NND-DNA Wall Mount Temperature Sensor, Pt100 Ohm RTD Sensor TE-NND-ENA Wall Mount Temperature Sensor, PT1K Ohm RTD Sensor TE-NND-FNA Wall Mount Temperature Sensor, 20K Ohm Sensor TE-NND-QNA Wall Mount Temperature Sensor, 10K Ohm Type III with 11K Ohm shunt Specifications Accuracy:Thermistor temp sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temp sensor: DIN class B; ±0.3°C @ 0°C (±.54°F @ 32°F). Temperature Limits:-40 to 140°F (-40 to 60°C). Housing Material:ABS plastic. Weight:0.3 lb (136 g). Features North American or European housing aesthetic options Uniform look matches other Dwyer wall mount devices Universal mounting plate meets various installation requirements Related Products Series RHP-W Wall Mount Humidity/Temperature/Dew Point Transmitter Series RHP-W Wall Mount Humidity/Temperature/Dew Point Transmitter Series CDT Carbon Dioxide/Temperature Transmitter Series CDT Carbon Dioxide/Temperature Transmitter Series CDTR Carbon Dioxide/RH/Temperature Transmitter Series CDTR Carbon Dioxide/RH/Temperature Transmitter Type : Wall Mount Temperature Sensor Warranty : 1yrs Ambient temperature : -40 To 140°F (-40 To 60°C). Application : Room Temperature Monitoring Certification : YES Color : Grey Housing: Material:ABS plastic. : Weight:0.3 lb (136 g). Brand:Dwyer USA : Temperature Range:-40 to 140 Degree F (-40 to 60 Degree C)

Number Of Flower : Infrared Temperature Sensor

Material : PVC

Certification : Yes

Application : Passive Infrared

Country of Origin : 0-15VDC

Frequency : 60Hz

Power : 0-5W

Driven Type : Battery, Electric

Feature : Non Conductive Liquid, Reservoirs Hoppers, Safety Interlocks, Solids In Storage Tanks, Suitable For Sensing Level, Visual Alarm System

Total Carbohydrate : 1yrs

Ambient Temperature : 0-100deg C, 100-200deg C

Automation Grade : Automatic, Fully Automatic, Manual, Semi Automatic

Indication Rating : Flow Rate, Total Flow

Brand Name : Dwyer

Application : Room Temperature Monitoring

Accuracy : Thermistor Temp Sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD Temp Sensor: DIN Class B; ±0.3°C @ 0°C (

wall mount occupancy sensor model osw-100 wall mount occupancy sensor wide viewing angle, easy to install the model osw-100 wall mount occupancy sensor is an infrared sensor designed to automatically control an hvac ventilation system. A unique dual delay processor eliminates false triggers due to short-term occupancies. The model osw-100 has a wide 110° viewing angle to capture movement up to 49.2 ft (15 m) away. modeldescription osw-100wall or corner mount infrared dual element occupancy sensor. specifications infrared sensor:dual element. range:49.2 ft (15 m). detectable speed:0.33 to 9.8 ft/sec (0.1 to 3.0 m/sec). control output rating:spdt, 0.2a @ 30 vdc. ambient operating temperature:-4 to 140°f (-20 to 60°c). power consumption:standby: 5 ma, operating: 18 ma. mounting height:5.9 to 11.8 ft (1.8 to 3.6 m). power requirements:22 to 26 vac/dc. weight:3.2 oz (90.7 g). agency approvals:ce. related products series rhp-w wall mount humidity/temperature/dew point transmitter series rhp-w wall mount humidity/temperature/dew point transmitter series te-wss stainless steel wall plate temperature sensor series te-wss stainless steel wall plate temperature sensor material : plastic, abs application : industrial use color : white brand name : dwyer usa type : occupancy sensors condition : new warranty : 1year alarm range : 49.2 ft (15 m).  

Number Of Flower : Occupancy Sensors

Material : Plastic

Application : Automobile Use, Industrial Use

Condition : New

Power : 22 To 26 VAC/DC

Total Carbohydrate : 1year

Alarm Range : 2.5mtr

Brand Name : Dwyer

Application : Industrial Use

Output : 22 To 26 VAC/DC

vibration transmitter (model vbt-1) model vbt-1 vibration transmitter continuous 4 to 20 ma output signal the model vbt-1 vibration transmitter continuously detects the vibration in a system and monitors for unusual operating conditions and potential failure. The vibration is converted into an analog signal at the current output. The vbt requires no setup, and there is no software required for configuration. The 2-wire loop power operation, combined with standard m12 micro cable connector and interchangeable mounting studs (1/4"-28 unf/m8 (2) or the 1/4"-28 unf), makes for a fast and reliable installation. product applications motors pumps fans engines compressors gear boxes modeldescription vbt-1vibration transmitter, 4-20 ma output specifications housing material:316 ss. temperature limit:-22 to 221°f (-30 to 105°c). accuracy:< ±3%. connections:m12 connector. enclosure rating:nema 6 (ip68). electrical rating:9.6 to 32 vdc. mounting orientation:any position. nonlinearity:< ±0.25% of span. frequency range:10 to 1000 hz. output signal:4 to 20 ma. repeatability:< 0.5%. weight:0.28 lb (0.125 kg). agency approval:ce. features easy set-up and operating concept stainless steel housing no software required accessories model numberdescription a-2834-wire connector. certification : yes usage : pumps output : 4 to 20 ma. condition : new type : vibration transmitters brand name : dwyer usa item : model vbt-1 vibration transmitter weight : 0.28 lb (0.125 kg).

Number Of Flower : Vibration Transmitters

Certification : Yes

Availability : 0.28 lb (0.125 kg).

Country of Origin : 9.6 to 32 vdc

Condition : New

Driven Type : Electric

Resolution : 5-10 Mm

Automation Grade : Automatic, Semi-automatic

Brand Name : Dwyer

Application : motors pumps fans engines compressors gear boxes

Output : 4 to 20 ma.

Vibrating Rod Level Switch (Model VRLS) Model VRLS Vibrating Rod Level Switch Economical, No Material Build Up, For Powder or Bulk Solids The Model VRLS Vibrating Rod Level Switch is an economical choice in level detection of powders and bulk soli. The VRLS utilizes a piezoelectric crystal that vibrates the rod at a natural frequency. Once the rod comes in contact with the material, the vibration will be dampened and the switch will change state. Once the rod is uncovered by the material, the switch will revert to its normal state. Perfect for silo or hopper applications, its probe design allows for self-cleaning, ensuring no build-up or bridging of material and accurate detection. Sensitivity is adjustable for detection ranging from large granular material to small powders with low bulk densities. The failsafe mode can be set for failure on high level or failure on low level using a selector switch in the enclosure. Product Applications Lime,Styrofoam, Dry Cereals,Sugar,Animal Feed,Milk Powder,Flour,Insulation,Cement,Paper Shavings,Plastic Granules, Sawdust,Carbon Black,Light Fibers,Detergent Powders,Dyes,Chalk,Silica,And Wood Chips. ModelDescription VRLS-01Vibrating rod level switch. Specifications Service:Dry powder or bulk materials compatible with wetted materials. Sensitivity:Min. bulk density of 20 lb/ft3 (320 kg/m3). Wetted Materials:304 SS. Temperature Limits:Ambient: -40 to 140°F (-40 to 60°C); Process: -40 to 176°F (-40 to 80°C). Pressure Limit:150 psi (10 bar). Power Requirement:20 to 250 VAC/VDC, 50/60 Hz. Power Consumption:15 VA. Enclosure:Aluminum, painted. Enclosure Rating:IP65.Switch Type:SPDT.Electrical Rating:5 A @ 250 VAC. Electrical Connections:Screw terminals. Conduit Connection:1/2" female NPT x 2. Process Connection:1" male NPT. Indication Lights:Internal: green and red LED. Sensing Delay:0 to 6 s. Weight:4.4 lb (2.0 kg). Features Probe design allows for self-cleaning, ensuring no build-up or bridging of material and accurate detection No mechanical moving parts with no routine maintenance required Sensitivity is adjustable for detection ranging from large granular material to small powders with low bulk densities The failsafe mode can be set for failure on high level or failure on low level using a selector switch in the enclosure Unaffected by the dielectric constant of the sensed material, making it superior to a capacitance level switch for applications where the dielectric constant is too low, where there is more than one material being used in one vessel, and when material moisture content can change Ideal for applications where the bulk density is too low for a rotating paddle level switch Voltage : 50/60 Hz Certification : YES Material : 304 SS. Brand Name : DWYER USA Application : Dry Powder Or Bulk Materials Compatible With Wetted Materials. Temperature : Ambient: -40 To 140°F (-40 To 60°C); Power : 50/60 Hz Type : Vibrating Rod Level Switch

Number Of Flower : Vibrating Fork Level Limit Switch

Brand Name : Dwyer

Material : NBR, Nylon, PVDF

Certification : Yes

Application : Vibrating Levelling

Country of Origin : 230VAC

Frequency : 60Hz

Power : 10-15Amp

Temperature : 0Dig C To + 60Dig C

Hole Diameter : 20-40mm

Setting Range : 1500-3000pF

Venturi Flowmeter with Magnehelic Gage Series VFLO Venturi Flowmeter with Magnehelic® Gage ±2.5% Accuracy, Dual Scale in SCFM & in w.c. The Series VFLO Venturi Flowmeter with Magnehelic® Gage is fabricated from aluminum and has a gradual Venturi profile to reduce pressure losses through the meter. Flowmeter can be used in a vertical or horizontal position just by rotating the Magnehelic® gage. The Magnehelic® gage provides a large, clear and accurate display of your differential pressure reading. Each meter is calibrated at standard atmospheric conditions. The dual scale reads in SCFM and in w.c. The meter is supplied with easy to read reference charts for various flow conditions. It is available in line sizes from 1" to 4" and can handle vacuum and pressure applications. To place an order for the Venturi Flowmeter with Magnehelic® Gage, see the Magnehelic® Configurator. Product Applications Filter monitoring Air velocity with Dwyer pitot tube Blower vacuum monitoringFan pressure indication Duct, room or building pressures Clean room positive pressure indication ModelDescription Series VFLOTo place an order for the Venturi Flowmeter with Magnehelic® Gage, see the Magnehelic® Configurator Specifications Service:Air and non-combustible, compatible gases. Wetted Materials:Aluminum, silicone, acrylic, polycarbonate, high carbon steel, low carbon steel, brass, paper, acrylic paint, enamel paint, alkyd coating, nickel plate, zinc plate, helsel FC, 300 series stainless steel, PTFE, Loctite® AV sealant, commercial black rubber, neoprene, samarium cobalt, nickel alloy steel cover, beryllium copper. Housing:Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test. Accuracy:±2.5% FS. Pressure Limits:-20" Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar). For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. Overpressure:Relief plug opens at approximately 25 psig (1.72 kPa). Temperature Limits:20 to 140°F (-6.67 to 60°C). Size:4" (101.6 mm) diameter dial face. Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations. Process Connection:Female NPT of nominal line size. See Model Chart page. Weight:Gage only: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g); Venturi: see Model Chart page. Features Gradual Venturi profile reduces pressure losses through meter helping to insure a more accurate measurement to meet measurement specifications Easy to read gage through undistorted plastic face permits viewing from far away Patented design provides quick response to pressure changes means no delay in assessing critical situations Durable and rugged housing and high-quality components combined provides longservice life and minimized down-time Accessories Model NumberDescription MVB-LM1Mini Brass Ball Valve, lever handle, 450 psi, 1/8" MVB-WM1Mini Brass Ball Valve, wedge handle, 450 psi, 1/8" MVB-TM1Mini Brass Ball Valve, tee handle, 450 psi, 1/8" Usage : Compatible Gases. Brand Name : DWYER USA Material : Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel, Paper Type : Venturi Flowmeter With Magnehelic Gage Size : 4 Warrenty : 1 Year Certificate : YES Accuracy : ±2.5% FS. Color : Grey

Size : 2inch, 4inch

Number Of Flower : Magnehelic Gauge Calibration

Material : Alloy Steel, Iron, Steel

Certification : Yes

Condition : New

Display Type : Digital

Automatic Grade : Automatic, Manual

Feature : Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof

Measuring Range : 100-200mm, 200-300mm, 300-400mm, 400-500mm, 500-600mm, 600-700mm, 700-800mm, 800-900mm, 900-1000mm

Gauge Diameter : 80-100mm

Gauge Shape : Round

Variable Area Glass Flowmeters Series VA Variable Area Glass Flowmeters The SERIES VA Variable Area Glass Flowmeters are designed with easy to read universal mm scale and supplied with correlation charts containing calibration data for air and water.Glass flowmeters are suitable for metering carrier gases, liquid and gas measurement in pilot plants, laboratories, process flow and level indicating. Units are equipped with a standard 6-turn needle valve for flow rate control. High precision metering valves with non-rising stems (sold separately) are available for high sensitivity control and resolution - particularly suited for very low flow rates.Flowmeters are shipped completely assembled and ready for panel mounting. Use an optional acrylic tripod base to convert to self-standing bench mounting. Features: Permanently fused ceramic scale with vertical locator line reduces parallax and eye fatigue saving time Long operating life with thick polycarbonate front shield that protects tube from breakage and serves as a magnifying lens to enhance reading resolution ModelDescription VA10411Variable area glass flowmeter, glass float, max. flow rate 2.65 SCFH (1249 ml/min) air, 0.428 GPH (27 ml/min) water.VA10412Variable area glass flowmeter, SS float, max. flow rate 5.34 SCFH (2520 ml/min) air, 1.125 GPH (71 ml/min) water.VA10413Variable area glass flowmeter, glass float, max. flow rate 4.32 SCFH (2040 ml/min) air, 0.63 GPH (40 ml/min) water.VA10414Variable area glass flowmeter, SS float, max. flow rate 8.45 SCFH (3990 ml/min) air, 1.71 GPH (108 ml/min) water.VA10417Variable area glass flowmeter, glass float, max. flow rate 13.4 SCFH (6318 ml/min) air, 2.33 GPH (147 ml/min) water.VA10418Variable area glass flowmeter, SS float, max. flow rate 25.5 SCFH (12058 ml/min) air, 5.77 GPH (364 ml/min) water.VA10419Variable area glass flowmeter, glass float, max. flow rate 27.9 SCFH (13153 ml/min) air, 4.9 GPH (309 ml/min) water.VA10420Variable area glass flowmeter, SS float, max. flow rate 52.3 SCFH (24680 ml/min) air, 11.81 GPH (745 ml/min) water.VA10421Variable area glass flowmeter, glass float, max. flow rate 49.1 SCFH (23169 ml/min) air, 8.27 GPH (522 ml/min) water.VA10422Variable area glass flowmeter, SS float, max. flow rate 89.2 SCFH (42094 ml/min) air, 19.97 GPH (1260 ml/min) water.VA10423Variable area glass flowmeter, glass float, max. flow rate 2.29 SCFH (1081 ml/min) air, 0.329 GPH (20.8 ml/min) water.VA10424Variable area glass flowmeter, SS float, max. flow rate 4.51 SCFH (2129 ml/min) air, 0.930 GPH (58.7 ml/min) water.VA1043Variable area glass flowmeter, glass float, max. flow rate 0.104 SCFH (49 ml/min) air, 0.009 GPH (0.55 ml/min) water.VA1044Variable area glass flowmeter, SS float, max. flow rate 0.307 SCFH (145 ml/min) air, 0.038 GPH (2.38 ml/min) water.VA1045Variable area glass flowmeter, glass float, max. flow rate 0.220 SCFH (104 ml/min) air, 0.028 GPH (1.8 ml/min) water.VA1046Variable area glass flowmeter, SS float, max. flow rate 0.633 SCFH (299 ml/min) air, 0.122 GPH (7.7 ml/min) water.VA1047Variable area glass flowmeter, glass float, max. flow rate 0.43  Material : Stainless Steel, Glass Or SS,Type : Variable Area Glass Flowmeters,Certificate : YES,Brand Name : DWYER USA,Warrenty : 1 Year,Color : Brown Usage : Compatible Gases Or Liquids. Scales:Universal 65 mm or 150 mm with correlation charts. : Turn-Down Ratio:10:1.

Number Of Flower : Industrial Flowmeter

Material : Plastic

Material : Stainless Steel, Glass Or SS

Number Of Flower : Variable Area Glass Flowmeters

Usage : Compatible Gases Or Liquids

Variable Area Flowmeter for Liquids Series DTFW Variable-Area Flowmeter for Liquids In-Line Mounting, 2% FS Accuracy The Series DTFW Variable-Area Flowmeter for Liquids measures water flow rates with ± 2% of full-scale accuracy at a competitive price. Durable metal construction ensures great compatibility and the strength to withstand system pressures of up to 3000 psig (200 bar). 1/4", 1/2" and 1" connections are available, with construction choices of a high quality brass or stainless steel. Comes pre-calibrated for horizontal in-line mounting. Product Applications Monitoring pressure drop across filters or strainers Flow scale based on differential pressure Liquid level given pressure differential between bottom and top of tank Hydraulic equipment Oil & gas equipment Heat exchangers Backflow prevention ModelDescription DTFW-1B-1WRange 0-1 GPM water, 1/4" npt, brass body DTFW-1B-2WRange 0-2 GPM water, 1/4" npt, brass body DTFW-1B-3WRange 0-3 GPM water, 1/4" npt, brass body DTFW-1B-4WRange 0-4 GPM water, 1/4" npt, brass body DTFW-1B-5WRange 0-5 GPM water, 1/4" npt, brass body DTFW-1S-1WRange 0-1 GPM water, 1/4" npt, ss body DTFW-1S-2WRange 0-2 GPM water, 1/4" npt, ss body DTFW-1S-3WRange 0-3 GPM water, 1/4" npt, ss body DTFW-1S-4WRange 0-4 GPM water, 1/4" npt, ss body DTFW-1S-5WRange 0-5 GPM water, 1/4" npt, ss body DTFW-2B-10WRange 0-10 GPM water, 1/2" npt, brass body DTFW-2B-1WRange 0-1 GPM water, 1/2" npt, brass body DTFW-2B-2WRange 0-2 GPM water, 1/2" npt, brass body DTFW-2B-3WRange 0-3 GPM water, 1/2" npt, brass body DTFW-2B-4WRange 0-4 GPM water, 1/2" npt, brass body DTFW-2B-5WRange 0-5 GPM water, 1/2" npt, brass body DTFW-2B-8WRange 0-8 GPM water, 1/2" npt, brass body DTFW-2S-10WRange 0-10 GPM water, 1/2" npt, ss body DTFW-2S-1WRange 0-1 GPM water, 1/2" npt, ss body DTFW-2S-2WRange 0-2 GPM water, 1/2" npt, ss body DTFW-2S-3WRange 0-3 GPM water, 1/2" npt, ss body DTFW-2S-4WRange 0-4 GPM water, 1/2" npt, ss body DTFW-2S-5WRange 0-5 GPM water, 1/2" npt, ss body DTFW-2S-8WRange 0-8 GPM water, 1/2" npt, ss body DTFW-3S-10WRange 0-10 GPM water, 1" npt, ss body DTFW-3S-15WRange 0-15 GPM water, 1" npt, ss body DTFW-3S-20WRange 0-20 GPM water, 1" npt, ss body DTFW-3S-25WRange 0-25 GPM water, 1" npt, ss body DTFW-3S-30WRange 0-30 GPM water, 1" npt, ss body Specifications Service:Compatible liquids. Wetted Materials:>Body: 316 SS or brass; Spring: 302 SS; Range spring: 302SS; Magnet: PTFE-coated; Metering cone: Acetal; or PTFE; Seals: Buna. Temperature Limits:-40 to 200°F (-40 to 93°C). Pressure Limit:DTFW-3S: 1500 psig (100 bar); All other DTFW models: 3000 psig (200 bar). Accuracy:±2% FS. Repeatability:±1% FS. Size:Diameter dial face 2.5" (63.5 mm). Process Connections:See catalog page. Weight:>DTFW-1B and 1S: 3 lb (1.36 kg); DTFW-2B and 2S: 5 lb (2.27 kg);

Line Size : Multisizes

Number Of Flower : Flow Meters

Material : Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel

Specialities : Accuracy, Digital Water Meter Display, Lorawan Compatible, Multi Jet, Spiral Water Meter

Application : Industrial

Operating Type : Automatic, Fully Automatic, Manual, Semi, Semi Automatic

Certificate : Yes

Warrenty : 1 Year

Brand Name : Dwyer

Power : Variable Area Flowmeter For Liquids

Accuracy : ±.0002