Instapower Ltd. Shivalik, Delhi

High intensity aviation warning light is used for aircraft safety for high rise building as per ICAO, FAA guidelines.Photocell (Sun switch)-Automatic change in intensity in all three modes, Synchronization of 12 high intensity light on single master control unit also available.

Reflector-Imported reflectors for greater visibility Photocell (Sun switch)-Automatic change in intensity in all three modes Radio suppression-conforming to BS800 Cover: Toughened glass Conforming to ICAO standards Synchronization of 12 high intensity light on single master control unit also available Failure alarm: visual indication Tested by ERDA, Vadodra-as per ICAO specifications Easy to install

LED wall washer is used for theme based architectural lighting for indoor and outdoor applications with huge savings on electricity bills. General Features Brass cable gland for water and dust protection High temperature silicon gasket on both ends for moisture protection. Direct adjustable mounting brackets. Clear toughened glass on top for protection. Throw of light is approx. 30 Feet DMX controller(Optional) Easy to install with help of screw Weight: 2.5 Kg

Shape : linear

Country of Origin : 110-250 V AC

Beam Angle : 120°-140°

Solar Low Intensity Aviation Obstruction Light are used as warning lights for airway safety. These light require no cables and reduce the initial capital costs. They are used for aircraft safety on telecom towers, buildings, chimneys, high-rise structures and transmission lines. General Features Intensity > 40 Candela Optical lens arrangement to provide 360° illumination by high intensity red LED Casing made from pressure die casting of aluminium alloy UV stabilized polycarbonate lens for 360°illumination Dusk down control provide through control panel Gasket for moisture protection All screws are SS 304 corrosion resistant conforming to ICAO specifications Failure alarm system (optional) Base plate provided for easy installation Configuration: Duty and standby mode with failure alarm monitoring

Availability : 8.5 kg

Diffuser: PC DiffuserHousing material: Plastic ABSEasy to install with the help of clamp providedDimension: 1270x90x90mm Weight : 1.3 kg

Voltage : 90-270 V AC

Traditionally, Red Lamps (Or BeaconsHazard) Use Incandescent Filament Bulbs. In Order To Improve The Otherwise Quite Short Lifespan, They Are Made With A Ruggedised Design And Are Run Below Normal Operating Power (Under-Running). A Recent Development Has Been The Use Of Arrays Of High Power Red LEDs In Place Of Incandescent Bulbs, Which Has Only Been Possible Since The Development Of LEDs Of Sufficient Brightness. LED Based Aviation Lamps Have A Significantly Longer Lifespan Than Incandescent Bulbs, Thus Reducing Maintenance Costs And Increasing Reliability.

These Obstruction Lights Can Generally Be Found Attached To Any Tall Structure Such As Broadcast Masts, Telecom Towers, Transmission Towers, TV Towers, Radio Towers, Water Tanks Located On High Elevation, Electricity Pylons, Chimneys, Tall Buildings, Cranes, Lighthouses, Windmills, Wind Cone (Windsocks), Bridges And Wind Turbines. Shorter Structures That Are Located Close To Airports May Also Require Lighting. Lights Are Usually Arranged In Clusters Around The Structure At Specific Heights Above The Ground. Frequently There Will Be A Set At The Top, And Then One Or More Sets Equally Spaced Down The Structure.

Solar Low Intensity Aviation Obstruction Light are used as warning lights for airway safety. These light require no cables and reduce the initial capital costs. They are used for aircraft safety on telecom towers, buildings, chimneys, high-rise structures and transmission lines. General Features Intensity > 40 Candela Optical lens arrangement to provide 360° illumination by high intensity red LED Casing made from pressure die casting of aluminium alloy UV stablised polycarbonate lens for 360°illumination Dusk down control provide through control panel Gasket for moisture protection All screws are SS 304 corrosion resistant conforming to ICAO specifications Failure alarm system (optional) Base plate provided for easy installation

Availability : 5.6 kg

Instapower Now Offers The Benefits Of LED Lighting In Its Collection Of Aviation Warning Light And LED Aviation Light. These Aviation Lights Are Installed Atop High Rise Structures, Buildings And Towers And Help In Protecting The Damage To Life And Property. We Offer Superior Quality Medium And Low Intensity Aviation Light , Which Meet All Specification Of International Civil Aviation Organization (ICAO), Montreal , Canada . These Provide The Benefits Of LED Lighting Technology And Require Low Initial As Well As Operating Costs And Serve For Long. These Aviation Light Can Be Installed At High Rise Structures As Per Their Heights And Widths And Are Vital For Safe Passage For Aviation, And Protection Of Valuable Human Life And Property. Instapower Has Developed These LED Based Models With The Objective Of Reducing The Power Consumption Without Making Any Compromise To The Performance And Specifications Required.

LED Saura Lantern as per MNRE/ DGS & D Specifications and tested at the Solar Energy Centre. General Features Efficiency> 80% Mobile Charging Inbuilt battery and charge controller Diffuser provided for charging and discharging LED indications provided for charging and discharging Temperature Compensated Battery Charging provided Battery Under Voltage and Overcharge Protection provided Protection against short circuit and battery Reverse Polarity Rust free-ABS plastic body Weight: 2.3 Kg

Country of Origin : 12 V/ 7.0 Ah

Power Lux is an excellent fixture for precision lighting of facades and surfaces with 50% energy saving compared to HPSV or MH lamp fixtures. General Features Special extruded aluminium heat sink for better thermal management of LEDs. Modular type. Easy adjustable fixture for achieving proper light IP rating: 65 Easy to install with the clamp provided Dimension: 370x235x126.5mm Weight : 2.0 kg

Country of Origin : 90-270 V AC

Wattage : 10 Watt

CRI : >75

Beam Angle : 120°

Medium intensity aviation warning light is used for aircraft safety for 45 mtrs and above as per ICAO, FAA guidelines. General Features Patented design Casing made of die cast aluminium body, red powder coated UV stabilized optical lens for 360° illumination Conforming to ICAO/FAA Standards Inbuilt Photocell Special grade through secondary optical lenses Radio suppression conforming to BS800 LPM technology Fixture Color: Red Tested by National Physical Laboratory, New Delhi Tested by ERDA, Vadodra Provided with 3 slots at 120°

Country of Origin : 90-270 V AC , 20V-50 V DC

Availability : 6.3 Kg

Magic glow is a flexible light strip that is used as decorative lighting for indoor and outdoor applications. General Features External SMPS power supply to operate 15 Mtrs Amplifier can be added for lengths greater than 15 Mtrs DMX Controller available for RGB option Roll length: 5 Mtrs Operating Voltage: 12 V DC IP rating: 54 Easy to install Weight: 0.8 Kg

Country of Origin : 12 V DC

Twin Low intensity aviation warning lights are used for aircraft safety on telecom towers, building, chimneys , high rise structures and transmission lines. General Features Patented design Die-cast aluminium body UV stabilized optical lens for 360° illumination Conforming to ICAO/FAA standards Inbuilt ON/OFF photocell LPM technology Tested by National Physical Laboratory, New Delhi Tested by ERDA, Vadodra-as per ICAO specifications Base plate provided for easy mounting

Country of Origin : 150-270 V AC , 20V-48 V DC

Instapower Now Offers The Benefits Of LED Lighting In Its Collection Of Aviation Warning Light And LED Aviation Light. These Aviation Lights Are Installed Atop High Rise Structures, Buildings And Towers And Help In Protecting The Damage To Life And Property. We Offer Superior Quality Medium And Low Intensity Aviation Light , Which Meet All Specification Of International Civil Aviation Organization (ICAO), Montreal , Canada . These Provide The Benefits Of LED Lighting Technology And Require Low Initial As Well As Operating Costs And Serve For Long. These Aviation Light Can Be Installed At High Rise Structures As Per Their Heights And Widths And Are Vital For Safe Passage For Aviation, And Protection Of Valuable Human Life And Property. Instapower Has Developed These LED Based Models With The Objective Of Reducing The Power Consumption Without Making Any Compromise To The Performance And Specifications Required.

Low intensity aviation warning lights are used for aircraft safety on telecom towers, building, chimneys , high rise structures and transmission lines. General Features Patented design Die-cast aluminium body UV stabilized optical lens for 360° illumination Conforming to ICAO/FAA standards Inbuilt ON/OFF photocell LPM technology Tested by National Physical Laboratory, New Delhi Tested by ERDA, Vadodra-as per ICAO specifications Base plate provided for easy mounting

Country of Origin : 150-270 V AC , 20V-48 V DC

LED Track light is an excellent design for retail or architectural lighting with more than 50% energy saving compared to halogen lamp or CDM-T lamps. General Features COB LED IP Protection: 40 Operating Voltage: 8-270 V AC LED Color: Warm White/ Neutral White Track Length: 1 meter (0.250 kg Weight) Easy to install Weight: 1.090 Kg/ Light

Shape : Cylindrical

Country of Origin : 80-270 V AC

Obstruction Light Are High-Medium-Low-Intensity Lighting Devices That Are Attached To Tall Structures And Used As Collision Avoidance Measures. Such Devices Make The Structure Much More Visible To Passing Aviation Aircraft And Are Usually Used At Night, Although In Some Countries They Are Used In The Daytime Also. These Aviation Lights Need To Be Of Sufficient Brightness In Order To Be Visible For Miles Around The Structure. Traditionally, Red Lamps (Or BeaconsHazard) Use Incandescent Filament Bulbs. In Order To Improve The Otherwise Quite Short Lifespan, They Are Made With A Ruggedised Design And Are Run Below Normal Operating Power (Under-Running). A Recent Development Has Been The Use Of Arrays Of High Power Red LEDs In Place Of Incandescent Bulbs, Which Has Only Been Possible Since The Development Of LEDs Of Sufficient Brightness. LED Based Aviation Lamps Have A Significantly Longer Lifespan Than Incandescent Bulbs, Thus Reducing Maintenance Costs And Increasing Reliability.

20 Watt LED Marble Glow is a good replacement for traditional 40 watt tube light luminaries and very suitable for retail stores, office with more than 50% energy saving. General Features Surface mounted fixture Aluminum housing with high quality diffuser cover Efficiency: 85% Power Factor: >0.9 THD:

Shape : linear

LED Track light is an excellent design for retail or architectural lighting with more than 50% energy saving compared to halogen lamp or CDM-T lamps. General Features Display light with adjustable lamp head Secondary optical technology Flicker free with low power consumption Material: Aluminium Alloy Weight: 0.1 Kg

Console acts as master unit for front, rear side and inside display. Console has memory to save 300 routes with 150 stops each. IP-65 Protection. Automatic Brightness control.Over Voltage and under voltage protection. Non-multiplexed design.     Light Characteristics LED Color: Display Boards:- Amber, Console:- Blue Graphic LCD Character Size: Display Boards:- 120-200 mm , Console:- 6 mm Display Pattern: Display Boards:-Fixed/ Scroll , Console:- Fixed

Shape : Rectangle

Country of Origin : 9-32 V DC

Insta LED Bulb is used for general lighting with more than 60% energy savings. It is a replacement for 50W Incandescent Bulb and 13W CFL. General Features Robust Power Supply Retrofit in existing fixtures Polycarbonate Diffuser Die cast Aluminium Fixture Easy to install with the applicable holder

Shape : Bulb

Country of Origin : 90-270 V AC