K.K.Manhole & Gratings Co.(P) Ltd Sarvpriya Vihar, Delhi

Consists of 2 Nos. base support in grey cement, 1 Nos. Table top of size 1000mm X 1000mm X 50mm thickness in terazzo or red colour finish, and 4 Nos. benches of size 1000mm length X 350mm width X 50mm thickness in terazzo or red colourfinish Overall Dimensions: Height of table:780 mm; Height of benches:450 mm All components are manufactured by using M-30 grade of Concrete using vibro-compaction process Reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection All the components are joined together with galvanized nuts & bolts, so as to make one composite table & bench  Table and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof

Bird Spikes provides effective and humane control for pest birds and climbing animals on all types of surfaces. These spikes are commonly used by private homes as well as public buildings because they create an unappealing and unstable environment for birds.

SPECIFICATION Heavy Duty Seesaw Swing for Outdoor Use Enhances beauty of park/garden Theft proof Low maintenance

Consists of 2 Nos. Base support in grey cement, Table of size 1000mm dia. X 50mm thickness in terrazzo finish, and 1 nos. bench of size 1700mm outer dia X 1200mm inner dia X 50mm thickness in terrazzo finish Overall dimensions: Height of table:780 mm; Height of bench:450 mm All components are manufactured by using M-30 grade of Concrete using vibro-compaction process All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection  All components are joined together with galvanized nuts & bolts, so as to make one composite table & bench  Table top and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof.

Consists of 2 Nos. Base support in grey cement concrete, Table of size 1000mm dia. X 50mm thickness in terazzo or red colour finish, and 4 nos. benches of size 1000mm length X 350mm width X 50mm thickness in terazzo or red colour finish(Curved) Overall Dimensions: Height of table:780 mm; Height of benches:450 mm All components are manufactured by using M-30 grade of Concrete using vibro-compaction process All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection All components are joined together with galvanized nuts & bolts, so as to make one composite table & bench Table top and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof

INSTALLATION: Light poles are designed for direct embedment into the ground without the use of foundations. After digging a hole, pole is set and the hole is filled with concrete, Mounting Height 11.5 ft; Overall Length 15 feet, Pole Tip Width -128 mm; Pole Butt Width 174 mm, Comes with a conduit that runs along the length of the pole for cable; cable entrance is from the bottom Provided with a 60 mm tennon pipe at the top for attaching a light fixture

Height : 11.5 ft

Consists of 2 Nos base support in grey cement, 1 No table top of size 1500mm length X 800mm width X 50mm thickness in red colour or terazzo finish, and 2 Nos. benches of size 1500mm length X 325mm width X 50mm thickness in red colour or terazzo finish Overall Dimensions: Height of table:780 mm; Height of bench:450 mm. All components are manufactured by using M-30 grade of Concrete using vibro-compaction process Reinforced suitably to promote long use and to prevent damage during handling transportation, & erection All the components are joined together with galvanized nuts & bolts, so as to make one composite table & bench Table and bench tops are treated with special anti-corrosive, water proof coating so as to make surfaces glossy and water proof.

SPECIFICATION Overall Dimensions: Platform size - 1500 mm length, 450 mm width, 100 mm thickness and 450 mm height with two legs of 150 mm thickness. Sitting Platform is in Red colour while the legs are in grey colour Manufactured by using M-30 grade of Concrete Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof

All components are manufactured by using M-30 grade of Concrete using vibro-compaction process, All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection, All components are joined together with galvanized nuts & bolts, so as to make one composite table & bench, Consists of 2 Nos. Base support in grey cement, Table of size 1000mm dia. X 50mm thickness in terrazzo finish, and 1 nos. bench of size 1700mm outer dia X 1200mm inner dia X 50mm thickness in terrazzo finish

Size : 1700mm

Minimum 3 mm thick Polypropylene copolymer is injection moulded around a 12 mm dia tor-steel bar, Minimum overall length of 260 mm and width of 165 mm, Protruding legs have a 2 mm tread on top surface by dots for providing an antiskid surface, Designed to withstand the bend test and chemical resistance test as per specification, Polyproplyene copolymer conforming to ASTM D-4101IS-10910

Thickness : 20 mm

Frame and Panels are manufactured from RCC using M-30 grade of Concrete, Panels are reinforced with 4x50x50mm welded wire mesh.Door is manufactured from 12mm thick laminated cement particle board (BISON or equivalent), Side RCC panels are 25mm thick while the bottom panel is 40mm thick, A unique lock is provided to close the cabin when in use. The door lock is designed so that the same can be locked from inside or outside but never both.The cost of the lock is almost NIL therefore its theft is not a concern.

Precast concrete U drains allow for speedier construction of channels with minimum wet cast concrete work. KK manufactures a full range of U shaped drains. These drains range in widths from 200 mm to 855 mm. They are produced in strict factory controlled conditions that ensure high quality. Besides storm water drainage, these types of drains are also used to house underground cables and waterlines in industrial setup.

Spacers, also known as cover blocks, provide the specified concrete cover to the reinforcement used in RCC construction both before and during concreting.

KK spikes are made from a composite of stainless steel and UV stabilized plastic. KK spikes are also easy to install with just glue andor screws. Bird Spikes provides effective and humane control for pest birds and climbing animals on all types of surfaces. These spikes are commonly used by private homes as well as public buildings because they create an unappealing and unstable environment for birds.

Comes with an in built lock, Comes with a slotted see through window to easily determine whether you have received mail, Easy to install with included Hardware,Made from fresh Polypropylene Plastic

Height : 350 mm

KK products provide consistent long term performance, All kerb stones are made from concrete mix design with a minimum 28 day compressive strength of 30MPa (also known as M30)

Our range of floor slabs and interlocking pavers help create an inviting and durable area for both residential and commercial applications. Overall Dimensions: 300x300x60mm thickness Our Grass Grids and Grass Pavers allow grass to grow in heavily trafficked areas.

Each bench consists of 2 Nos base support in grey cement colour (Thickness:100mm, Back height:1000 mm & Front height:450mm, Base width:1435 mm) and 10 Nos. reinforced concrete planks in red colour of size 1500 X 100 X 50mm, and 2 No. of reinforced concrete plank of size 1500 X 200 X 50 mm Overall Dimensions: Seating length of the Bench:1500 mm on one side & 1500 mm on the opposite side; Seating height of the Bench:450 mm; Total height of the Bench:1000 mm All components are reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection All parts are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly Bench top and back planks are treated with special anti- corrosive, water proof coating so as to make surfaces glossy and water proof All components are manufactured by using M-30 grade of Concrete using vibro compaction process.

SPECIFICATION Stool Dimensions: 400 mm dia X 400 mm Height X 100 mm Seat Thickness X 300 mm Stem Length; Platform - 600 mm x 600 mm x 50 mm thickness Platform is bolted to the stool using 1 nos bolt Seat is in red colour while the stem is in grey colour Manufactured by using M-30 grade of Concrete using vibro compaction process

SPECIFICATION Overall Dimensions: Sitting Platform size - 2825mm length X 400 mm width X 50mm Thickness; Leg size - 400mm Height X 400mm Width X 80/55mm thickness; Sitting height is 450 mm Sitting Platform is in Red colour while the legs are in grey colour Manufactured by using M-30 grade of Concrete Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof

SPECIFICATION Overall Dimensions: Sitting Platform size - 1600mm I.D. X 2400mm O.D. X 400 mm width X 50mm Thickness; Leg size - 400mm Height X 400mm Width X 80/55mm thickness; Sitting height is 450 mm Sitting Platform is in Red colour while the legs are in grey colour Manufactured by using M-30 grade of Concrete Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof

SPECIFICATION Overall Dimensions: Sitting Platform size - 1200mm length X 350 mm width X 450mm height Sitting Platform is in Red colour while the legs are in grey colour Manufactured by using M-30 grade of Concrete Suitably reinforced to promote long use and to prevent damage during handling, transportation & erection Treated with special anti-corrosive, water proof coating so as to make the surface glossy and water proof

High compressive strength of fiber concrete spacers ensures that the spacers remain in place before and during concreting (plastic spacers are subject to deformation under high loads) Fiber concrete spacers have better bonding with in-situ concrete. As a result hairline crack formation is discouraged (hairline cracks are often seen where plastic spacers are used) Fiber concrete spacers can allow construction of surfaces that are impermeable to water Fiber concrete spacers are more cost-effective as compared to plastic spacers Fiber concrete spacers are fire resistant and not attacked by alkalies

Consists of 2 Nos base support in grey cement, 1 No table top of size 1500mm length X 800mm width X 50mm thickness in red colour or terazzo finish, and 2 Nos. benches of size 1500mm length X 325mm width X 50mm thickness in red colour or terazzo finish Overall Dimensions: Height of table:780 mm; Height of bench:450 mm. All components are manufactured by using M-30 grade of Concrete using vibro-compaction process Reinforced suitably to promote long use and to prevent damage during handling transportation, & erection All the components are joined together with galvanized nuts & bolts, so as to make one composite table & bench