Keith Electronics Pvt. Ltd. Bhikaji Cama, Delhi

Our portable vibration meters are designed to be an integral component of your machinery, engine or human vibration program. With accurate data, you can operate optimally by avoiding downtime due to unexpected circumstances and extending machine life by quickly identifying and fixing issues.

The “TOS5300 Series” is a series of test instruments used in Hipot (withstanding voltage) tests and insulation resistance tests, two of the four tests regarded as necessary for ensuring the safety of electrical products. With an output of 5 kV/100 mA (AC) and 6 kV/10 mA (DC), the series can be used in Hipot (withstanding voltage) & insulation resistance testing of electronic equipment and electronic parts, based on the requirements of IEC, EN, UL, VDE, JIS, and other international safety standards and the Electrical Appliance and Material Safety Law.     Features Reducing the tact timeIncreasing the productivity! Capable of setting the test time from 0.1s Highly stableNewly developed, high-efficiency PWM switching amplifier !Providing a stable output of high voltage without being affected by AC line variation. Ensure the user to perform highly reliable testing with confidence, even in regions with large voltage variations. (Input voltage fluctuation rate: ±0.3%) Rise/Fall Time control function of the applied voltageEquipped with a Rise time/Fall time control function.Prevents from an excessive stress applied to the EUT or for standard tests. Pursuing usability and safetyAll new design of the control panel and output terminals!Eliminates the projected components of output terminals, and equips with a new type of the LOW terminal. Pursuing the improvement of safety and a convenience in production line, such as providing the protection cover for the front panel. The utility software: Data Acquisition for TOS5300 (Freeware)Data Acquisition for TOS5300 is a software product that lets you collect and manage test results generated by our TOS5300 Series Hipot and Insulation Resistance Testers. Also, Data Acquisition for TOS5300 allows you to save, search, and print data with ease. What’s more, you can execute or stop the test through a simple operation using a PC. Supporting the World-wide input voltageUsable globally !Usable in any country without changing the input power supply.Selectable output frequency !The instrument not rely on the input power environment. Supplying the stable test voltage with 50/60 Hz frequencies. Lightweight and Compact designIncreasing your work efficiency!Weighs Approx. 15 kg, 40% lighter than conventional models.(Compared to TOS5300 and TOS8870A)

The FID-30R includes an optical power meter and succeeds the FID-25R while the FID-31R, the updated standard model, replaces the FID-26R. The fibre identifiers, used for identifying the light power presence in optical fibres, include three detecting functions: TONE, TRAFFIC, and ONU   Specifications: Worlds Highest Signal Detection Sensitivity ONU Signal Detection Function Trigger Lock Function 2.4" Colour Touchscreen with Backlight

Fibershot Smart series OTDR KEY FEATURES Hand-held and portable High cost performance 5-inch HD touch screen Data Storage: 40,000 groups of curves Simple interface and one-button testing Long working hours Support multi-languages

The Model 3888 (3-channel) and 3889 (6-channel) Handheld Particle Counters utilize the same, proven parts that made the original Handheld Particle Counters so reliable. The instruments meet/exceed new ISO 21501-4 Standards and are fully RoHS compliant. The instruments now have a base/stand for advanced communication capabilities (Wi-Fi, Ethernet, RS485), a larger, full color touchscreen display, and enables real time monitoring while connected to a PC. FEATURES Large, 4.3-inch full-color touchscreen 0.3 micron minimum sensitivity Store up to 10,000 measurements Compact and Light weight Remote control software NIST traceable calibration included

CMA 0604-B-A general laser cutting machine is a updated laser machine compared with Han’s Yueming laser tradiaitonal general laser cutter. It equipped with higher performance components and advanced laser cutting and engraving software.

Weight : 260kg

PBZ Series The PBZ series is a bipolar type DC regulated power source that can continuously change both + and – polarities passing through 0 without changing the output terminal.By adopting a “Switching + Linear” system, the PBZ is able to realize both drastic weight reduction as well as high speed and low noise operation.   Features Low ripple and noise (in CV mode) Waveform generation function Sequence function Synchronized operation function

The MAX-710B is the first tablet-inspired OTDR that is handy, lightweight and rugged enough for any outside plant environment.With a 7-inch, outdoor-enhanced touchscreen, the most efficient handheld display in the industry, it delivers an unprecedented userexperience. Specifications : FTTx last-mile installation and troubleshooting. Short access network testing. FTTA-fi ber DAS installations. CATV/HFC network testing.  S

Automatically uses the proper calibration parameters when combined with the FLS-300 or FOT-300 source units.  Specifications : Highly accurate unit offering 10 calibrated wavelengths and reference values No offset nulling required, reducing measurement time. Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership. Autonomy of over 300 hours

Specifications : World’s quickest splicing 7sec. / tube-heating 14sec. Minimal manual operation. Splice in 4 steps. Multi-functional carrying case with integrated work station. Absolute robustness.

Entry-level Ethernet test solution for up to 1G electrical/optical Ethernet interfaces with VLAN, Q-in-Q tags, or MPLS labels and verification of Carrier Ethernet SLAs.   Specifications : Electrical and optical testing in one convenient package Line rate traffic generation and Layer 2 and Layer 3 . RFC 2544 for throughput verification and line qualification . LED lights for quick verification . Electrical cable diagnostic tests checks cable length, type, and displays type of fault and distance . Cable diagnostics to determine if cable is straight-through/crossover . Optical power level measurements to verify fiber connectivity .

Color : White

The FLS-300 Light Source is part of EXFO’s new line of handheld units, which includes the FPM-300 Power Meter and the FOT-300 Optical Loss Test Set.    Specifications : Multifunctional light source: up to three singlemode wavelengths on a single port, 4 ports Power autonomy of 120 hours. Highest output power in the industry. Ergonomic, eye-catching handheld package.

The HJS-02 is designed for stripping of fiber ribbon with up to 12 fibers all together. In order to achieve this, the HJS-02 is equipped with a heater, which soften the coating of the fiber ribbon for smooth stripping. Specifications: Approx. 3 sec. at normal mode, Approx. 8 sec. at power saving mode 12 V DC from Fujikura splicer with DC power cord 85 to 265 V AC with optional AC adapter By FH-50 series Fiber Holder, except FH-50-250 and FH-50-900 107W x 40D x 29H mm, 195g

The FuseConnect is designed to work with an industry standard cleaver and splicers utilising a fibre holder system. The simplified field installation process minimizes the potential for operator error and expensive connector scrap; even in difficult field environments or in exposed conditions at remote site locations. Our latest fusion splicers are also pre-programmed for FuseConnect terminations further simplifying the assembly process.  Specifications : RF-overlay FTTP networks Cable TV backbone networks. Outside plant. FTTDesk. MDU FTTP Cabling Central office connector replacement.

Type : Digital Printer

It’s an analog world – strain, pressure, voltage, current — these are the measurements that your Graphtec instrument will faithfully capture for you. On paper or in memory, or both. Trust these Graphtec instruments for your most important measurements!Data acquisition (DAQ) is the measurement, recording, analyzing, and presentation of real world phenomena. It includes electrical measurements such as voltage, current, power as well as measurements through sensors and transducers including temperature, pressure, flow, level, strain, acceleration, pH, humidity, and more.

The CE6000 series sets the standard for high performance, low cost cutting plotters. It is equipped with professional-level features such as registration mark sensing and perforation cutting for producing a dividing line of labels or packaging mock-ups. The advanced features of the CE6000 series improve your work efficiency and increases productivity.

Providing typical cleave angles of 0.5 degrees, the CT-30A is simple to use and provides consistantly good results. The blade has 16 positions which allows 48,000 operations before replacement.   Specifications: Small size, lightweight, and easy handling Applicable up to 12-fibre ribbon cleaving Fibre collector equipped as standard 2-action operation including fibre scrap collection

Type : Power Packs

Application : Industrial Use

Weight : 100-200kg, 200-300kg, 300-400kg

Color : Black, Brown

Voltage : 110V, 220V, 380V

Condition : New, Used

Automatic Grade : Automatic, Fully Automatic, Manual

Power : 1-3kw, 3-6kw, 6-9kw

Driven Type : Battery

Warranty : 1year, 2years

Multi-function hot-wire anemometer with detachable compatible probes Kanomax Climomaster is the most accurate hot-wire anemometer of its kind.It offers research-grade accuracy at an affordable, industry competitive price.A high degree of accuracy is essential for applications such as cleanroom certifications, laminar flow measurements, and R&D product development. FEATURES The most accurate handheld hot-wire anemometer in its class Probe Compatibility feature allows you to have spare probes Detachable probe Automatic Flow Rate Calculation function USB connection to PC Large data storage, stores up to 20,000 measurements Differential Pressure available as an option

The Fiber Holder, FH-50 series is exclusively used for Fujikura FSM-60R, FSM-18R, SpliceMate, and former Fujikura ribbon fiber Splicers. Fujikura Fiber Holder System is developed to provide appropriate splicing work for several kinds of fibers, single fibers or fiber ribbons. The FH-50 series is supplied with a pair, for the left and the right respectively.   Specifications : Single to 12 fibers FSM-60R, FSM-18R, SpliceMate(FSM-11R), and former Fujikura Ribbon Fiber splicer