Rectifiers Dealers

AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are air cooled, oil cooled or air & oil cooled combined as per design. The units have been manufactured up to 800kV and up to 3000kVA.The units have type of tests such as dry withstand, wet withstand, breakdown voltage in air/oil, oil insulation, and pollution Test.

We Are Manufacturer & Supplier of Electroplating Rectifier.   Electroplating Rectifier Details : Hi-Rel Electroplating Rectifier is an economically and most efficient method of obtaining D.C. from A.C. Supply by anodizing and many other electro chemical processes.The widest application in the field of electroplating normally require maximum voltage of 8V, 12V, 16V, 20V, 24V at various current capacity as per requirement.A range of current rating from 50 to 10000Amp.A.C. Input : Hi-Rel Electroplating Rectifier is designed for Three Phase 50Hz. A.C. Input supply, are suitable for operation at any voltage between 380/415V.D.C Output : The D.C Output is variable in steps or continuously or steplessly variable from Zero to its rated full load, from no load to full rated current, over the input range as described.All Three Phase Units have low ripple of less than 5% and are suitable for all kind of metal finishing.

We have Fast Recovery Rectifiers - 4007. We are engaged in offering, which is an electronic component that conducts electric current in only one direction. Thus, these are widely used in mobile phone chargers, ctv, smps and solar chargers. Available in different specifications, these components are can convert the high pulse ac voltage to dc voltage.

KEY FEATURES Wide input voltage range Active power factor correction High efficiency, power factor and power density Compact in size and operational within height of 3U Hot-swappable, swift and convenient installation Excellent rectifier current share accuracy Microprocessor based intelligent monitoring and control Equipped with RS485,I2c interfae for external communication Equipped with ISP function, enable software in site upgrade Comprehensive fault detection and protection schemes.

Digital Electronic Rectifier / Inverter Rectifier inverter Based Rectifier armac Introduces a Series of Portable and Light Weight Inverter Based Rectifiers Suitable for Arc/tig Application. armac A.t.m. is Portable & Light Weight Inverter-based Rectifier Ideal to Weld Every Metal. pipes non Ferrous Metals low Alloy, Corrosion, Heat and Creep. mild Steel & Low Alloy. stainless Steel. armac A.t.m. Machines are also Suitable for Argon Welding it is a Tripple Action Machine Suitable for Arc and Tig Welding. armac A.t.m. Offers a Series of Welding Rectifiers are Forced Air-cooled, Electronic Type and are Designed to Provide a Dc Welding Current Where 1 Phase & 3 Phase, 50hz Ac Main Power is Available At Voltage Ranging from 190 to 270 & 380 to 440. tig Application with the Armac A. T. M. Welding Machines You Can Easily Tig Weld Mild Alloyed Steels and Stainless Steel the Attachmets Needed are a Tig Torch with a Gas Valve, a Gas Regulator and a Bottle of Argon Gas.

  Moving Coil Rectifier AC Instruments are suitable for the measurement of AC currents and voltages. These are permanent magnet (Alnico high flux density) type with pivot-jewel suspension with rectifier circuit. The movement is having high torque to weight ratio and linear one with knife edge pointer for accurate reading. The design and construction of instruments is most modern. Sturdiness, simplicity, sensitivity and rigid quality control ensure these movements for high grade performance under adverse conditions of shock and vibration. All instruments are housed in ABS moulded dust proof cases with zero adjuster accessible from the front.   Additional Description : Moving Coil Rectifier Meter of 90° or 240° Deflection with Fixed / Interchangeable Scale Facility.Movement Type : Moving Coil rectifier permanent magnet type with Jewel Bearing Suspension.Range :  Current µA : 100µA to 750µA              Current mA : 1mA to 750mA              Current A : 1A to 5A (Direct),              Through CT/1A or /5A for Higher Current              Voltage V : 10V to 1000V(Direct) Through PT for Higher Voltages. Standards : IS-1248 Accuracy : ±1.5% of Full Scale for all except CR72                  ±2.5% of Full scale for CR72Zero position : Offset zeroSize : 72x72mm, 96x96mm, 144x144mm.

Silicon Controlled Rectifier has thermowatt construction for low thermal resistance and high heat dissipation. Silicon Controlled Rectifier is designed to be used in such electronic devices that need high power coupled with voltage. Further, Silicon Controlled Rectifier guarantees rectification of high power alternating current present in a high-voltage power transmission that takes place in direct current.

Electroplating rectifier is a kind of electronic device which changes high voltage alternate current (a.c.) into low voltage direct current (d.c.). Electroplating rectifier is a very crucial component for any industry. For different industrial applications the electroplating rectifiers are available in a range starting from 1 volt to 1000 volts, to suit varying industrial requirements. Today these rectifiers are being used for various electro-chemical processes like anodizing, hydrogenation and more.

Leveraging on our vast infrastructure, we are capable of trading and supplying our clients with Welding Rectifier. These products are directly sourced from the certified manufacturers of the market. Confirm to international quality standards, these machines are provided in various models and specifications at industry leading prices to fulfill the demands of customers.

All flange rectifiers are made of mild steel, with screw press for easy operation and chucks are made of high carbon steel to avoid any wear & tear during operation. It is a small manual machine but its accuracy of working affects the total canning operation and preservation of foods. It does not have any motor and operation is totally manual.

Electroplating rectifier is an economical and most efficient method of obtaining dc from ac supply. Naveen's manufacture wide range of anodizing rectifiers & hard anodizing rectifiers covering 0 - 500 volts and upto 15000 amps. Capacity suitable for electroplating, anodizing, hydrogenation and many other electro-chemical processes. The entire rectifier manufacturing process is under one roof ensuring 100% quality control at every stage of production. We believe in quality, delivery, systems and competitive cost in our supplies.

Inverter technology is a voltage conversion system which applied to welding makes compact power sources with low energy conversion. This rectifier is suitable for both tig as well as electrode welding. Following are the models available: a: irtte400: this is suitable for up to 4.0 mm electrode and tig rods a: irtte600: this is suitable for up to 5.0 mm electrode and tig rods