Battery Bank Voltage Options24, 48, 96, 110, 120, 240 Volts DC. Or 220 / 240 Volts 50 Hz A/C
PCU (Inverter+Charge Controller)As per customer requirements
DistributionUnderground / overhead as per customer requirements
Module Wattage
0.5 KWp to 500 KWp
Battery Bank Voltage Options
24, 48, 96, 110, 120, 240 Volts DC. Or 220 / 240 Volts 50 Hz A/C
Type of Battery Bank
Consisting of 2/6 Volts cells of Positive tubular plate type conforming to IS 1651 or any other type as per customer's requirements
PCU (Inverter+Charge Controller)
As per customer requirements
Distribution
Underground / overhead as per customer requirements
Earthing
Single conductor (positive or negative) Earthing or centre tap Earthing
Loads
As per customer's requirements
Module Wattage
0.5 KWp to 500 KWp
Battery Bank Voltage Options
24, 48, 96, 110, 120, 240 Volts DC. Or 220 / 240 Volts 50 Hz A/C
Type of Battery Bank
Consisting of 2/6 Volts cells of Positive tubular plate type conforming to IS 1651 or any other type as per customer's requirements
PCU (Inverter+Charge Controller)
As per customer requirements
Distribution
Underground / overhead as per customer requirements
Earthing
Single conductor (positive or negative) Earthing or centre tap Earthing
Loads
As per customer's requirements
These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNRE’s NABARD and allied schemes as well as remote site applications where grid may or may not be available.Inverter Overload Grid Chg. Inverter On
PV Chg. Battery Voltage Low Inverter Short circuit Over Load Battery under over voltage No Load Shutdown
These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNRE’s NABARD and allied schemes as well as remote site applications where grid may or may not be available.Inverter Overload Grid Chg. Inverter On
PV Chg. Battery Voltage Low Inverter Short circuit Over Load Battery under over voltage No Load Shutdown
Battery Options6V – 4.5 Ah Sealed Maintenance Free lead acid type or 12V – 7Ah Sealed Maintenance Free
Lamps Options5 / 7 / 9 Watts CFL
Housing Material OptionsGlass fiber / ABS
Chimney OptionsAcrylic / Glass / Polycarbonate
ProtectionsBattery deep discharge, Battery over charge, Reverse polarity
IndicationsCharging ‘ON’, Battery deep discharge, Battery overcharge
Hours of Lighting2 to 4 hours depending upon lamp battery and module.
Weight4 to 5.5 Kg.
Lantern Housing materialAluminium/ABS/as required
Chimney MaterialAcrylic /Polycarbonate
Lamp5/7 Watts compact fluorescent lamp in four pin/two pins version
SPV Module8/10/12 Wp module depending upon the model
Battery
Sealed Maintenance Free Battery of Absorbed Electrolyte type
PROVISIONS
On-Off Switch
Fuse
LED indications for :-
battery deep discharge (Load disconnect)
battery overcharge (Charging disconnect) (optional)
Charging in process
Plug and socket for the connection of PV module to the lantern for charging
Solder free installation
GENERAL SPECIFICATIONS
PROVISIONS
On-Off Switch
Fuse
LED indications for :-
battery deep discharge (Load disconnect)
battery overcharge (Charging disconnect) (optional)
Charging in process
Plug and socket for the connection of PV module to the lantern for charging
Solder free installation
GENERAL SPECIFICATIONS
On-Off Switch,Fuse,battery deep discharge (Load disconnect),battery overcharge (Charging disconnect) (optional),Charging in process,Plug and socket for the connection of PV module to the lantern for charging,Solder free installation.
On-Off Switch,Fuse,battery deep discharge (Load disconnect),battery overcharge (Charging disconnect) (optional),Charging in process,Plug and socket for the connection of PV module to the lantern for charging,Solder free installation.
Battery Lead Acid at C/10 rate 75 AhLuminaire CFL-11 W 1 No.
offers a wide range of Solar PV Street Lighting Systems with standard and custom built versions. The Standard model generally conforms to MNES specification.600 lumens (nominal) for each Luminaire of CFL 09W lamp
offers a wide range of Solar PV Street Lighting Systems with standard and custom built versions. The Standard model generally conforms to MNES specification.600 lumens (nominal) for each Luminaire of CFL 09W lamp
PCUs are designed for small Solar Power Applications. These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNRE’s NABARD and allied schemes as well as remote site applications where grid may or may not be available.
PCUs are designed for small Solar Power Applications. These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNRE’s NABARD and allied schemes as well as remote site applications where grid may or may not be available.
RITIKA PCUs are designed for small Solar Power Applications. These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNRE’s NABARD and allied schemes as well as remote site applications where grid may or may not be available.
FEATURES
Micro Controller based Technology.
PWM (Pulse Width Modulation) design.
Grid Charger & Inverter with Bi-Directional operation.
Pure Sine-wave output with low THD.
Short Circuit Protection.
No Load Shutdown.
Battery Deep Discharge Protection.
Reverse Polarity Protection.
Under/Over Output Voltage Protection.
Battery Over-Charging Protection.
High efficiency DC – DC power conversion.
Fast Changeover time.
Data Logging (Optional)
LED/LCD Display for metering, I/P & O/P Parameters.
RITIKA PCUs are designed for small Solar Power Applications. These conform to the requirements of MNRE for performance, environmental and IP Testing. These can be applied to systems for MNRE’s NABARD and allied schemes as well as remote site applications where grid may or may not be available.
FEATURES
Micro Controller based Technology.
PWM (Pulse Width Modulation) design.
Grid Charger & Inverter with Bi-Directional operation.
Pure Sine-wave output with low THD.
Short Circuit Protection.
No Load Shutdown.
Battery Deep Discharge Protection.
Reverse Polarity Protection.
Under/Over Output Voltage Protection.
Battery Over-Charging Protection.
High efficiency DC – DC power conversion.
Fast Changeover time.
Data Logging (Optional)
LED/LCD Display for metering, I/P & O/P Parameters.
RITIKA Systems Solar PV Interfaces are designed for customers who have already invested in a domestic inverter and battery set, and now desire to switch to solar power. They may use this system to integrate solar PV charging in a simple and cost efficient manner.
Being an-add on to the existing domestic inverter, this offers a very cost efficient way of converting an existing domestic inverter (already owned by the customer) into Solar Power Conditioning Unit (Solar Inverter + Battery Charge Controller). Interface can automatically sense 12V/24V system and work accordingly.
OBJECTIVE:-
To promote Solar Energy and thus contributing to the environment.
To make Solar Energy more affordable.
To develop and manufacture an easy to install/maintain system that works with existing domestic inverter/storage batteries.
To monitor battery charge levels at all times.
To give preference to Solar PV charging.
This helps in reducing AC grid electricity units consumed by the customer.
CONNECTION DIAGRAM
RITIKA Systems Solar PV Interfaces are designed for customers who have already invested in a domestic inverter and battery set, and now desire to switch to solar power. They may use this system to integrate solar PV charging in a simple and cost efficient manner.
Being an-add on to the existing domestic inverter, this offers a very cost efficient way of converting an existing domestic inverter (already owned by the customer) into Solar Power Conditioning Unit (Solar Inverter + Battery Charge Controller). Interface can automatically sense 12V/24V system and work accordingly.
OBJECTIVE:-
To promote Solar Energy and thus contributing to the environment.
To make Solar Energy more affordable.
To develop and manufacture an easy to install/maintain system that works with existing domestic inverter/storage batteries.
To monitor battery charge levels at all times.
To give preference to Solar PV charging.
This helps in reducing AC grid electricity units consumed by the customer.
CONNECTION DIAGRAM
Lamp6/12V – 2.25/03 Watts in circular or vertical fashion
SPV Module06/12V – 03/05 Wp Module
BatterySealed Maintenance Free 6/12V – 4.5/07Ah
Housing Material OptionsGlass fiber / ABS
Chimney OptionsAcrylic / Glass / Polycarbonate
ProtectionsBattery deep discharge, Battery over charge, Reverse polarity
IndicationsCharging ‘ON’, Battery deep discharge, Battery overcharge
Hours of Lighting3 to 6 hours depending upon lamp battery and module.
PROVISIONS
On-Off Switch
Fuse
LED indications for :-
battery deep discharge (Load disconnect)
battery overcharge (Charging disconnect) (optional)
Charging in process
Plug and socket for the connection of PV module to the lantern for charging
Solder free installation.
PROVISIONS
On-Off Switch
Fuse
LED indications for :-
battery deep discharge (Load disconnect)
battery overcharge (Charging disconnect) (optional)
Charging in process
Plug and socket for the connection of PV module to the lantern for charging
Solder free installation.
Operation Mode,PCU must be designed to work in
1. Stand Alone Mode 2. Hybrid Mode 3. OFF-LINE Mode (500VA, 1 KVA & 2KVA),Indications
Inverter Overload Grid Chg. Inverter On
PV Chg. Battery Voltage Low Inverter Short circuit Over Load Battery under over voltage No Load Shutdown
Operation Mode,PCU must be designed to work in
1. Stand Alone Mode 2. Hybrid Mode 3. OFF-LINE Mode (500VA, 1 KVA & 2KVA),Indications
Inverter Overload Grid Chg. Inverter On
PV Chg. Battery Voltage Low Inverter Short circuit Over Load Battery under over voltage No Load Shutdown
Lantern Housing material,AluminiumABSas required,Chimney Material Acrylic Polycarbonate,Lamp 57 Watts compact fluorescent lamp in four pintwo pins version,SPV Module 81012 Wp module depending upon the model,Battery
Sealed Maintenance Free Battery of Absorbed Electrolyte type
Lantern Housing material,AluminiumABSas required,Chimney Material Acrylic Polycarbonate,Lamp 57 Watts compact fluorescent lamp in four pintwo pins version,SPV Module 81012 Wp module depending upon the model,Battery
Sealed Maintenance Free Battery of Absorbed Electrolyte type
RSPL offers a wide range of Solar PV Street Lighting Systems with standard and custom built versions. The Standard model generally conforms to MNES specification.
RSPL offers a wide range of Solar PV Street Lighting Systems with standard and custom built versions. The Standard model generally conforms to MNES specification.
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Quality Philosophy At Ritika, our commitment to total quality extends to all layers of the organization, empowering every individual - from engineering, to manufacturing, to service and support - to anticipate and meet our customers' requirements. The result of this customer-driven quality philosophy is the relentless pursuit of innovation, not for its own sake, but for the continual improvement of our products and processes, and for the satisfaction and ultimate competitive advantage of our customers. Customer Satisfaction The company enjoys a wide client base. Besides India, the esteemed customers of the company are spread Afghanistan, in India, Nepal, and other countries. Excellent After-Sales service with a nation wide dealer presence and service points has ensured that once a customer experiences the service Ritika Systems has to offer, he becomes a customer for life. Such emphasis on customer satisfaction ensured that Ritika Systems features amongst the most best solar solutions providers in the country. Sustained Growth The company has had sustained growth since its inception in 1986. The company's annual sales turnover rose form Rs 0.4 Million in 1986-87 to about Rs. 700 Million in 2012 - 2013. Our Strength The key of our Success is our employees. We have a team of well-qualified staff in the field and well established Design and Development unit for Balance of Systems. At Ritika we deal only with the best. Our tie-ups with the most reputed manufacturers of Solar PV Panels-Tata Power Solar/REIL/TopSun and battery manufacturers- Exide ensure long lasting, durable, high quality products which are industrial benchmarks.
Reviews & Ratings
Write a Review
Post Free Ad
