Rohit Industries Group Private Limited Karampura, Delhi

Material : High Speed Steel

Length : Up to 500mm Length

Packaging Type : Polished

Brand Name : Rohit

Grade : Tungsten Carbide

Country of Origin : Made in India

Material : HSS

Application : Milling Machine

Number Of Flower : HSS Tool Bits

Material : High Speed Steel

Length : 2" to 12"

Country of Origin : Made in India

Tip size : 3mm to 16mm

Brand Name : ROHIT

Finishing : Grinding

Country of Origin : Made in India

We at RIGPL manufactures & exports SKH51 (M2), SKH55, ASP & other grades punches & die-buttons / HSS sleeves. You can choose from varied range of punches shape & sizes, we have following series to choose from : P101 Series - Standard HSS Straight Punches available in stock with +1mm Head diameter from the Body or Tip Diameter | Hardness ranging from 60-62HRc P103 Series - HSS Straight Punches For Medium Load i.e. Punches with Head Diameter +2mm from the Body or Tip Diameter (made to order in 1-week) P104 Series - HSS Straight Punches For Heavy Load i.e. Punches with Head Diameter +3mm from the Body or Tip Diameter (made to order in 1-week)

HSS Straight Flute Plug Tap (Second Tap) manufactured in HSS M2 grade These HSS Taps are suitable for general tapping for all materials These are most Economical Machine Taps in RIGPL's range of Tapping Tools  Best for Tapping on materials that produce shorter chips like Cast Iron, SG Iron, MS etc.� We provide Coated HSS Machine Taps in TiN, TiALN, etc on request

Features M42 material HSS Flat End Mills also manufactured on special request, All HSS End Mills have 30* helical flutes and unmatched hardness to provide longer tool life, Sharper cutting edges of HSS End Mills provide longer life, These end mills comes with 4Flute & 6Flute (for bigger diameter) All in-house heat treatment equipment enables RIGPL to provide better hardness & micro structure control of these end mills.  Limitations These end mills are not CNC manufactured, however they possess good quality to achieve suitable productivity, For Higher Productivity use our Carbide Flat End Mills [To start with you can go for C101 or C110 Series] For Better Life & higher productivity you can always request for HSS M42 & Powder Metallurgy Grade CNC manufactured HSS End Mills

High Performance Solid Carbide Drills  C3HS Carbide Drill series meant for 3 L/D to 5 L/D machining depths : Our testing results shows that C3HS can reduce the CPC by at least 30-50% in your Drilling application.  C3HL Carbide Drill series meant for 5 L/D to 8 L/D machining depths : Results show approximately 30-50% reduction in CPC with our new C3HS or C3HL Carbide Drills from the other competitors in the market.   Features of High Performance Solid Carbide Drills Superior Design clubbed with UMG (Ultra Fine carbide grain size), Newly developed NOVA coating, Works at faster feed & speed rates then never before, Improves productivity & achieves unmatched Life Less than 10-microns Run-Out

Number Of Flower : Straight Shank

Packaging Type : Bright

RIGPL manufactures Coolant Fed Carbide Drills or also known as Through coolant Carbide Drills; as the name suggests these Carbide Drills comes with the 2 or 3 Helical Coolant holes depending upon customer request. Features  RIGPL's Carbide Coolant Fed Carbide Drills is only available drilling Solution to all type of Drilling problems like intermittent, deep-hole, blind hole & other type of drilling applications. Carbide Coolant Fed Drills will increase your productivity to new level while drilling in CI upto 400BHN, Alloy steel, SS, Titanium, Nickel Alloys & other difficult to machine materials, Carbide Drills comes with Super Finish on the surface for smoother chip evacuation,  Smoother & tighter tolerances holes are achieved,  Reaming is minimized with the stiffer tolerances are achieved with RIGPL's Coolant Fed Carbide Drills.

Brand Name : ROHIT

HRC : 65

Material : Carbide

Number Of Flower : High Feed Cutter

Overall Length : 50mm

Brand Name : ROHIT

Coating : NOVA

Application : Best for Die mold applications.

Brand Name : ROHIT

  GP Carbide Drills Series available with RIGPL C1GS series is Carbide Drills Stub length series as per BS 328 C1GJ series is Carbide Drills Jobber Length series as per DIN 338 Limitations For difficult to drill materials like Alloy Steel, SS, Titanium, Nickel Alloys we recommend High Performance Carbide Drill Series For higher production rates & for production jobs we recommend High Performance Carbide Drill series

We at Rohit Cutting Tools manufacture Carbide Ball Nose Endmills in 2-Flute and 4-Flute for varied types of material machining ranging from Aluminum, MS, Alloy Steel, Cast Iron, Stainless Steel (SUS), Hardened Steel machining up to 70HRc, Inconel, Titanium and other Exotic materials. You can choose from 30+ series of Carbide Ball Nose End-Mills for your different application.   

Tip size : 4mm to 16mm

Brand Name : ROHIT

Finishing : Grinding

Country of Origin : Made in India