Yamuna Power & Infrastructure Ltd Hauz Khas, Delhi

Lightning arresters are manufactured using high quality raw material which is used to protect electrical equipment from medium and high voltage. Application A lightning arrester / Surge Arrester is a device used on electrical power systems to protect the insulation of transformer and conductors of the system from the damaging effects of lightning. The typical lightning surge arrester has a high-voltage terminal and a ground terminal. When a lightning surge (or switching surge, which is very similar) travels along the power line to the arrester, the current from the surge is diverted through the arrestor, in to earth. Construction Our lightning surge arresters are Gapless metal-oxide type, consist of Zinc-oxide Varistors, FRP Core and Silicone Housing.

Heat Shrinkable Stress Control Tubing Enquire Now Features DSCT is made from radiation crosslinked polymeric materials Effectively control the high electrical stress present at insulation screen termination and joint of power cables Minimum shrink temperature: 100oC Minimum fully recovered temperature:1300C

Country of Origin : India

Number Of Flower : Heat Shrinkable Tube

Thickness : 0-3mm

Application : Electrical Winding

Features Live Installation Anti-tracking Light Weight Superior UV and Abrasion Resistance Weather Resistance Range Taking Quick Installation Localized Installation

Heat Shrinkable Semi Conductive Breakout Enquire Now Features Breakout can be used to cable terminations up to 36 KV The electrically semi-conductive breakout provide effective conductive screen and sealing protection to the cable termination Minimum fully recovered temperature:130oC

Pre Moulded Straight Through Joint 11 kV (for XLPE Cable) DPMS/S-11kV Enquire Now Features Cold-applied. No Special Tools. Constant Radial Pressure. In Built Stress Control Arrangement Un limited Shelf Life. In compliance with IEC-60502-4.

Features Cold-applied. No Special Tools. Constant Radial Pressure. In Built Stress Control Arrangement Un limited Shelf Life. In compliance with IEC-60502-4.

Features Light weight (65-80% less than ceramic insulator) Silicon rubber sheds provide perfect hydrophobic performance, good resistance to ageing, tracking and erosion Stable behaviour at extreme climatic conditions Long term surface hydrophobicity Suitable for polluted environment, salty atmospheres etc. Resistance to breakage and vandalism, practically unbreakable Superior anti-tracking properties High mechanical strength Ease of installation (easier handling with lighter equipment and labour at the job site) Resistance to Seismic Shock Compliance with IEC 61109, ANS C29-11-1989

Application The Polymer Air Break Switch is gang operated and outdoor Type. The main Application of this product is to isolate the Transformer, Overhead lines, System or Cables from distribution network. Construction Our Polymer Air Break Switch have Two Pole/Triple pole construction and suitable for Vertical / Horizontal mounting. Each pole consist of galvanised steel base, Polymeric Post insulators, Self aligning type contacts made of hard drawn electrolytic copper/heavily tinned .The various parts accordingly finished to ensure interchangeability of similar components. Flexible braided tape is of EC grade tin plated copper of appropriate size to complete the current path from moving contact to fix contact.

Polymeric Drop Out Fuse (Solid Core) are manufactured using highly conductive copper alloy. These current limiting fuses are installed at high voltage and are used to provide protection when the trouble is consistent Application Our Drop out expulsion type fuse cut outs suitable for installation in 50Hz, 11KV distribution system for protection of H. T. lines and transformer centers Tap lines. Construction The Drop out fuse set has single pole construction. Each pole consist of Polymeric insulators, all current carrying parts made of a highly conductive copper alloy and the contact portion are silver plated for corrosion resistance and efficient current flow & the fuse tube made of fiber glass coated with ultraviolet inhibitor on the outer surface and having arc quenching bone fiber liner inside.

Salient Features Sheet Metal Enclosure-Pre-treated & Powder Coated Bolted Construction Extendable from both sides of penal PVC Insulated Busbar No live parts accessible & exposed In-built safety shutter All Switching operations performed with front door closed Circuit Breaker withdraw type with interlock & fixed type Separate compartment for Breaker, Busbar, CT/Cable & Instrument chamber Access to cable terminals from the rear Maintenance & Operation Maintenance free vacuum interrupters and low maintenance drive mechanism Front access door fully integrated with interlock system Complete mechanical interlocking provided

Features Application : Insulating, Pressure & humidity-tight sheathings, Suitable for cable joints & terminations Material : Cross linked polyolefin, free of lead & cadmium Colour : Black Medium wall High Tensile strength Resistant to cold flow Very good chemical & electrical properties Non-corrosive UV-resistant Continuous operation temperature: -55 degrees to 125 degrees centigrade In conformance with ESI 09 - 13

Heat Shrinkable Cable End Caps Enquire Now Features Effectively offering protection against oxidation, ozone, UV radiation etc Coated with hot melt adhesive to ensure environment seal Easily to fit over the cable end Protect power cable up to 1000V and telecommunication cable Material: Thermally stabilized cross-linked polyolefin, coated with specially designed hot melt adhesive Minimum fully shrink temperature:120 oC

Features DBIT is made from radiation cross linked polyolefin The dual layer structure of insulation/hot melt adhesive Widely used to protect complex busbar connections where tube products can not be applied Up to 24 KV

DENSONS Heat Shrink Straight Joints For Low Tension 1.1kV PVC/XLPE/PILC

Features All key inputs are produced in-house. Continuous operation temperature-55oC to 120oC. Corrosion resistant and unlimited shelf life. In compliance with IEC-60502-4 / IS-13573. Electrolytic grade connectors.

FRP Cross Arms Both 11kV and 33kV FRP Cross Arms are Manufactured as per the latest REC specifications by Pultrusion Process. Features Weather resistant specially for coastal areas Light weight for easy installation in hilly areas Avoidance of birdage problem Continuance of power supply even after insulators are cracked Lower size insulators can be used reducing the cost of insulators

Features Simple installation, requires only workman’s hands Accommodates a wide range of cable sizes No torches or heat required Good thermal stability and water proof Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure Excellent wet electrical properties Improved tough rubber formulation to with stand rough backfilling Resists fungus,acids ,alkalis,ozone and ultraviolet light

The Elbow Connectors 25 kV-250, 400 & 630 amps Shielded Connector is shielded and insulated termination, rated 250, 400 & 630 amps upto 24 kV, conected with underground cable ranging from 25 to 400mm2 (conductor cross section). Meets requirements of DIN 47636 standard. Elbow Connectors 24 kV - 250, 400 & 630 amps Shielded Connectors are molded using high quality peroxide-cured EPDM insulation. It is used to terminate high quality voltage underground cable to switchgear, RMU and 250, 400 & 630 amps junctions equipped with deadbreak bushing. Shielded Fore-Connectors are designed for usage on solid dielectric cable (XLPE or EPR). In order to provide more cable branch circuits, the shielded fore connectors can be connected with the 24 kV - 250, 400 & 630 Shielded type Sub- Connector.   Features Safe to touch. Capacitive test point. Faster installation. Non-corrosive and UV resistant In-built stress control offering high stress control properties Outstanding mechanical, chemical & electrical properties. Unlimited shelf-life. In compliance with IEC-60502-4.

Features Simple Structure, pre-fabricated, & factory tested. Ready to use and easy to install. Minimises jointer’s skills. Made from LSR, delivering better Electrical and Outdoor Performance. In compliance with IEC-60502-4 / IS:13573.

Features Simple Structure, pre-fabricated, & factory tested. Ready to use and easy to install. Minimises jointer’s skills. Made from LSR, delivering better Electrical and Outdoor Performance. In compliance with IEC-60502-4 / IS:13573.

Features Designed for medium voltage applications up to 36 KV Shaped components to meet a variety of configuration requriements Continuous operation temperature: -55° C to 120° C Used in proctecting cable and up to 36 KV against flashover or surges induce during working life in switch gear in and transformer boxes.

Heat Shrinkable Anti Tracking Rain Sheds Enquire Now Features Designed for medium voltage applications up to 36 KV Shaped components to meet a variety of configuration requriements Continuous operation temperature: -55° C to 120° C High creep resistance, anti-tracking properties