Agitator Reactor Double Mechanical Seal
15,000 Per Piece
1 Piece (MOQ)
Reactor Dry Seal
Get Price Quote
Applications : Food Products Pharmaceutical Products Mixers Agitators.
Best Deals from Agitator Seal
Dry Agitator Mechanical Seal
5,000 - 50,000 Per Piece
1 Piece (MOQ)
Agitator Seals
10,000 - 22,000 Per piece
5 Piece (MOQ)
AGITATOR SEAL Lineproof Engineering is a leading manufacturer and exporter of best quality Agitator Seals. This seal is precisely manufactured with high precision by utilizing paramount quality raw materials and contemporary techniques in tune with the international quality standards. The offered seal finds application in agitator for providing air tight sealing. Furthermore, our patrons can purchase this seal in varied sizes, at highly competitive prices from us. Industrial Application: Chemical, Pharmaceuticals, Drugs & Polymer Industries. Face Materials: Tungsten Carbide, Carbon, Silicon Carbide, Ceramic. Metal Component: S.S 304, S.S 316, Alloy 20, Hastelloy C. Secondary Seal: Viton, EPDM, Silicon, Grafoil, PTFE, FFKM. Operating Limits: Pressure : 40 bar Temperature : -40˚C to 200˚C Speed : Subject to specification.
Agitator Seals
Get Price Quote
Seal Type 510/D and 510/D/B Mechanical Seals are designed for Top, Side and Bottom Entry Drives in Agitators and Reactors. Compact Economical Cartridge Double Mechanical Seal for Agitators and Reactors. Seal Type 510/D/B Design Incorporate with location of Bearings very close to the Seal. These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage in Process Gas OR Fluids to the Environment can be tolerated. Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal Face distortion when Expose to Compressive Load and Thermal Pressure.
Agitator Seals
Get Price Quote
100 Piece (MOQ)
Agitator Mechanical Seal
31,500 - 65,000 Per Piece
Agitator Seal
15,000 - 90,000 Per Set
1 Piece (MOQ)
Item Code: SSI-108B Type SSI-108B : is a top entry agitator double mechanical seal designed for medium nobigh-pressure applications. These seal are successfully used for many years in all kinds of mixers, reactors, driers & mills in the Pharmaceuticals, Paints, Pulp & Plastic industries. These seals are factory assembled with cartridge unit & therefore can be easily installed without disturbing the delicate mating faces. For larger shaft deflection special version with integrated floating bearing is provided. Applications : Used in Pulpier, Plastics & Pharmaceuticals industries
Agitator Mechanical Seal
40,000 Per Piece
10 Piece(s) (MOQ)
Agitator Mechanical Seals
4,000 Per Piece
1 Piece(s) (MOQ)
Series Meqe800 Are Preset Factory Assembled Cartridge Seals For Use In Agitators , Mixers And Reactor Vessels. The Seals Construction Very Slightly For Top Entry Vessels, Side Entry Vessels And Bottom Entry Vessels. The Seal Are Designed To The Shortest Shaft Length And The Bearings Are Located As Close To The Vessel Body To Minimize The Deflection. Seal Characteristics Single Seal Double Seal Unbalanced / Balanced Independent On Direction Of Rotation Applications General Chemicals And Its Vapors Petrochemicals And Its Vapors Light Hydrocarbons And Its Vapors
Agitator Seal
5,000 - 500,000 Per Piece
1 SET (MOQ)
We offer Agitator Seal . Super Agitator Seals of 1000 Class are just superb i.e. The summary of all Agitator Seals.These seals are specially designed for Agitators, Mixers, Autoclaves, etc. Special Seals have been successfully designed for Glass Lined Reaction Vessels to handle severe operating conditions of highly corrosive Acids, Toxics and Gas emitting products.The type and arrangements of Double Mechanical Seals and Dry Seals depend on Temperature, Pressure, Nature of Fluids, etc. For higher Temperature application, the seal assembly has got jacketed chamber to circulate chilled water to bring down the temperature. Also normally chilled plain water is passed through the cooling coil of Thermosiphon to bring down the temperature of compatible barrier fluid circulated in seal housing to maintain the continuous cooling. Bottom portion of seal housing is also designed with heat trapping jacketed cooling to reduce the temperature around the bottom seal face. For higher pressure application, Balance seals are used for successful performance. The total assembly is precisely inspected and assembled with preadjusted working length in factory itself and put on dynamic performance test with pressurised fluid for at least 12 hours before being supplied to clients. Size : 1" to 10" shaft Pressure : Vaccuum to 1000 psi Temperature : Upto 300 degrees C.
Agitator Mixer Seals
Get Price Quote
We are the prime Manufacturer, Exporter and Supplier of Agitator Mixer Seals in India. The product range is prepared as per the industry norms and widely demanded in various industrial applications. Owing to equipped with the latest technology, we are capable to provide Agitator Mixer Seals in customized specifications, defined by buyers. Description : “Agitator Mechanical Seals" are top entry agitator double mechanical seal designed for medium to high pressure applications. These seal are successfully used for many years in all kind of mixer, reactors, paints and pulps etc. these seals can be easily installed without disturbing the delicase mating faces.Application : Used in top entry mixer vessels in pharmaceuticals & chemical industries. Operating Limits Material : Seal Face - Carbon, Silicon, Ceramic, TC Secondary Seals - Viton / PTFE Metal Parts - SS 316, SS-304
Agitator Seal
Get Price Quote
Agitator Seal (LIE/708)
Get Price Quote
Agitator Seal (LIE/708): Agitator seals are low speed and successfully used for agitators , mixers , vessels , top and bottom mounted etc. these seals are specially used to prevent leakages of vapor and high pressure from tanks , for applications involving viscous or dry sticky media. It is mainly use for paints, mixers, driers, pharmaceuticals, pulp, paper, food processing etc. for critical application of high temperature and pressure , thermosyphon is recommended for trouble free operation.
Reactor Double Mechanical Seal
35,000 - 200,000 Per piece
10 Piece (MOQ)
High Pressure Double Balanced Mechanical Seal For Hydrogenator. This seal is Excellent with low r.p.m Opration in Vaccum And High Pressure Conditions.
Double Agitator Mechanical Seals
97,000 Per Piece
10 Piece (MOQ)
J I Mech Seal and Engineering is a reliable supplier and manufacturer of double agitator mechanical seals. Double (or dual) mechanical seals are designed to ensure maximum sealing safety. These seals virtually eliminate leakage of the fluid or gas being handled in pumps or mixers. • Double seals provide a level of safety/zero emissions compliance not possible with single seals. This is essential when pumping or mixing a dangerous or toxic substance. • Double seals are a must-have for certain applications in many countries • These seals are increasingly used by companies to meet specific environmental goals or emissions requirements. • A properly installed double seal also allows for near complete control over the seal operating environment and fluid film over the seal faces. This factor alone can greatly maximize seal life. Get high-quality products from us today.
Dry Running Agitator Seal
Get Price Quote
1 Piece (MOQ)
Agitator Reactor Vessel Mechanical Seal
12,000 Per Piece
10 Piece (MOQ)
In Catridge or Reactor seal our different Group is widely used in Clear Lubricating , Light Hydrocarbon, Non Corrosive, Dirth, Petrochemicals, volatile liquids, General Chemicals, , lubricating liquids, toxic, Hazards, Petroleum Refinery, Sluury, High hydrocarbon, Dirty Water, General Chemicals, Oil appliaction, etc. . .
Agitator Mechnical Seals
20,000 - 151,000 Per piece
5 Piece (MOQ)
Agitator Seal With Shaft
200 - 500 Per Set
1 Set (MOQ)
"MATOS" Make... Agitator SealOwing to rich industrial experience in this business, our company is involved in offering a wide range of Agitator Seal with Shaft to our clients. This Agitator Seal with Shaft is made with fine quality of material and its unique robust design give excellent working for long period of time. As per the demand of our clients, we are providing this product at market leading prices.Features: Longer service life Optimum performance Fine quality
Reactor Seals
Get Price Quote
Agitator Seal With Shaft
300 Per mm
Features: Longer service life Optimum performance Fine quality
BSI-108B Mixer and Agitator Seals
Get Price Quote
Features Structure: Double-End High Pressure Mechanical Seals Standard: HG21571-95 balanced and unbalanced Operating range Pressure: – 0.1 ~ 0.6 MPa (when the pressure is bigger than 0.6 MPa, the pressure balancing device is needed and its connection size can be customized) Temperature: – 20 ~ 150 ºC (cooling tank is required if the temperature is higher than 150 ºC and the installation height should be 100 mm higher than normal) Linear Speed: 2 m/s or less Materials Rotary Ring Face: SiC/Carbon Stationary Ring Face: TC/SiC Elastomers: NBR/Viton/EPDM/PTFE/FFKM Springs: SS304/SS316/HC-276 Metal Parts: SS304/SS316/SS316L Recommended applications Petro Chemicals General Chemicals Light Hydro Carbons Emitting Vapour Pharmaceutical Industries
Agitator Seals
Get Price Quote
Agitator Seals are designed to meet demand of chemical processing in plastics, paint, food processing and pharmaceutical industries. Agitator Seals are sturdy and have high compressive strength, excellent thermal stability, and resistance against corrosion. Our Agitator Seals are greatly appreciated for leak proof performance and long service life. Our customers can avail Agitator Seals in different specifications. Clients can contact us for detailed information on Agitator Seals. Application Petrochemicals, General & Light Hydrocarbons Emitting Vapour & Phamaceutical Industies Face Materials Carbon/ Ceramic Carbon/ Silicon Carbide Carbon/ Tungsten Carbide Metal Parts SS316, SS304, Hastelloy-C Hastelloy-B, Monel, Alloy-20 Carbon Steel Secondary Seal : Inboard -PTFE, GFT Outboard-Elastoners PTFE, GFT Operating Range Shaft Dia : 25 to 150 mm Pressure : 35 Bars (max) Temperature : Ambinent to +200 C Speed : 400 rpm Features Single Acting | Unbalanced | Single helical coil Independent of Direction of Rotation Torque Transmission by Elastomer Bellow
Agitator Seals
Get Price Quote
We are instrumental in offering superior quality Agitator Seals that are available under BCS-AG Series. Our single double & dry run Agitator Seals are outside mounted balanced seals which do not require shaft or sleeve step its specially designed to handle high pressure, high temperature, high acidic, corrosive, toxics fluids, these Agitator Seals are supplied in cartridge condition, pre-assembled and pre-set to required working dimensions which can be slide on the shaft and bolted to the vessel flange. These Agitator Seals are available with or without bearing and can be provided with cooling jacket in case of high temperature. Our Agitator Seals are very cost effective & economic and can be easily installed & repaired in the field to minimize cost and downtime. These Agitator Seals have a simple drive design which withstands shaft movement vibration & deflection. Design of these Agitator Seals eliminates the need of auxiliary equipments for cooling and lubrication for mixer application. We are experts in reconditioning all kinds of agitator seals are inherently balanced to take care of high pressure and vacuum.
Agitator Seals
Get Price Quote
Applications : General Chemicals and its vapours. Petrochemicals and its vapours. Light Hydrocarbons and its vapours. Material : Seal Faces - Carbon, SiC, Tung, Ceramic Metal Parts - SS316, Hastelloy-C Alloy 20 O-rings - Elastomers, PTFE Seal Characteristics : Single Seal / Double Seal Unbalanced / Balanced Independent on direction of rotation Operating Limits : Shaft Diameterdl - 25 150mm Pressurep - vaccum 40 bar (max) Temperature : -20 to 220oC Velocityv - 4 m/sec Product Code : PS - 300 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seal construction varies slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.
Agitator Mechanical Seal
Get Price Quote
We are offering agitator mechanical seal. applications generally used for pulper, plastics & pharmaceutical industries operating limits shaft dia. : 40 to 200mmpressure : up to 60 barstemperature : -20 to 200 c
Agitator Seals
Get Price Quote
Agitator Mechanical Seal
Get Price Quote
1 Piece (MOQ)
Dry Running Agitator Seal
7,500 Per Piece
The basic materials named as raw materials should be of top-notch quality in order to maintain the quality of the finished goods. Thus, our experts source the raw materials only from the reliable vendors. Our team of quality analysts strictly tests each product against varied quality parameters ensuring zero defects at buyer's end. Specifications : Pressure - Up to 1.40 MPa Temperature - 10 to 150ºC Application - Industrial
Cities
