Filter Regulator Dealers

Type : Air Filter + Regulator + Lubricator Connection : 1⁄4”, 1⁄2” and 1” BSP Body Material : Alluminium Alloy Die Cast Filter Element Material : Plastic Spring Range : 0.07 – 0.7 bar, 0.21 – 2.10 bar, 0.35 – 3.50 bar, 0.7 – 7.0 bar Gauge Range : 0 – 2.5 kg/cm2, 0.4 kg/cm2, 0 -6 Kg/cm2 Regulator Type : Relieving

We are offering gas pressure regulator, gas filter. Energy combustion, ahmedabad a local source of all types of tecnogas make products. we are distributor of all types of tecnogas make gas pressure regulator rg series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 2 bar and 5 bar gas filter fm series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 6 bar slum shut off valve mvb series size:-2" and 3" safety relief valve mvs series size:-1" gas solenoid valve evp series size:-2" and 3" and all other products are available like pressure switch,pressure gauge attachment, diaphragm etc.

Our customer-centric approach while making online or offline procedures makes us a reliable name. We keep a close eye on the transactions made to keep all the information shared by the clients safe and confidential. Owing to our capacity of meeting the exact requirements of the clients, we are supplying quality Air Filter regulator. Features : High grade material Precision measurement Durable & affordable

MIEPL  make  Misc. Accessories  Air Filter Regulator   MIEPL Air filter-cum-Pressure Regulator removes completely the moisture and dust particles and provides the exact pressure constantly at varying air demands. Its compactness and highly accurate performance for a long period with minimum of maintenance make for an optimum compromise between the ideal and the practical, consistent with end-use.

5 / 2 Way Single Pilot Valve, 2 / 2 Way Direct Acting Solenoid Valv

Made As per ISO specification. Regulator fitted with 'Rolling Diaphragm' to give quick response. Semi-Automatic drain removal as STD features. (Automatic Drain Optional) Built in gauge is provided with an option of connecting it to ext gauge. Easy bowl removal refixing by 90� turn of bowl. Lockable safety knob provided with regulator.

Filter Regulator Series AW-A allows users to easily replace the filter element as the element and bowl are in one piece only. The regulator used in this series is an energy saving regulator with a pressure drpo improvement of up to 50%. Some other features of AW-A Series Filter Regulators are:-   Reduced required maintenance space: Max. 46% reduction Better visibility & safer The bowl is covered with a transparent bowl guard. Attachment Spacer : Y200-A, Y300-A, Y400-A, Y500-A Spacer with bracket : Y200T-A, Y300T-A, Y400T-A, Y500T-A

We are a major Manufacturer, Exporter & Supplier of Air Filter Pressure Regulator. Our range of Air Filter Pressure Regulator includes Air Filter Pressure Regulator (JRC-4) and Air Filter Pressure Regulator (JRC-6). The Air Filter Pressure Regulator is a reliable unit designed for instrumentation. The design is especially well suited to controllers and instruments besides actuators, air cylinders, and a wide range of industrial pneumatic systems and equipment, JRC Air Set is ruggedly designed and constructed and shows excellent performance characteristics. Quality materials are used and each unit is pressure and leak tested, to ensure long and trouble free operation. Specifications Inlet Pressure : Upto 10 kg/cm2 (150 psig)Outlet Pressure : 0 to 120 psig with spring ranges of 0 to 30 psig, 0 to 60 psig and 0 to 120 psigEnd Connections : Inlet/Outlet/Gauge : 1/4" NPT (F)Filter Element : ABS plastic, 25 microns and 5 microns optionFeatures : Higher capacity and power droop, Soft seat construction in both the pressure reducing and relief sections and Aluminium and stainless steel material option. Principle Of Operation : The pressure is set to a desired value by compressing the range spring by adjusting knob or screw. This causes the pin to move downwards, opening the supply valve and allowing air flow. Filtration : The air first enters the inlet port and passes through the filter element where solid particles are trapped. Water and oil particles are thrown against the inside wall of the bowl by centrifugal force. The liquid particles collect in the bottom of the bowl, which can be drained off regularly by opening the DRAIN PLUG.Regulation : The clean air passes through the supply valve and the pressure at the outlet builds up against the control diaphragm and closes the valve until the equilibrium is achieved. This equilibrium or set pressure is maintained under changes in operating conditions in the following manner.Downstream pressure drop : A drop in downstream pressure reduces the diaphragm pressure force, upsetting the equilibrium condition. This unbalance causes the supply valve to open until the pressure builds up once more to the equilibrium.Downstream pressure increase : A sudden increase in downstream pressure acts on the diaphragm, causing the relief seat in the diaphragm assembly to lift and open. The excess pressure drops almost instantaneously to the equilibrium value, at which point the relief valve closes.Changes in forward flow : Under forward flow conditions the range spring force is balanced by the diaphragm pressure force, with the supply valve open just enough to maintain the requited equilibrium output pressure. When high flow occurs, a specially designed aspirator helps maintain downstream pressure and compensates for droop. Design Features Self-relievingRugged, Corrosion - resistant ConstructionVarious output Pressure ranges availableFilter size options available to suit different applicationsSeveral mounting options including mounting bracketEconomic designMinimum moving parts Performance Features Superior regulation characteristicsLow droopExcellent stability and repeatabilityEffect of supply pressure variation is negligibleSmooth action and stable control over full rangeIdeal for instrument air pressure regulation Associated Benefits Utilizes over 36 years of engineering, design & application expertiseLong and trouble free serviceAssured product Quality Maintenance The filter element is readily accessible by removing the dripwel bowl and can be cleaned by dipping in kerosene or any similar solvent. The Airset has a drain cock at the bottom edge of the dripwell which permits drainage when the unit is mounted in vertical or panel-mounted horizontal position. J. R. Conval Engineers have been designed to give long and trouble-free service with little or no maintenance. In the event of on-site servicing a spares kit may be provided for easy replacement, reducing downtime.