Filter Press Dealers

Zero Hold Up Filter Press is a perfect solid liquid separation device. Our Zero Hold Up Filter Press works on the principle of pressure feeding and offers highly efficient service. Zero Hold Up Filter Presses, manufactured by us, are used for separating solid from liquid slurries as a perfect dewatering device. Construction The Cartridge assembly of Zero Hold Up Filter Press consists of plates, perforated screens, spacers and fitter mediaSingle pipeline is formed internally by Interlocking spacersThe unfiltered liquid is centrally fed under pressure from bottom inletOn each plate fitted with filter media the liquids spreads out equallySolids remain on filter media and clear filtrate flows through precisely made holes on sides of platesThe filtrate collects in the shell and comes out through the outlet. In this process, solids are evenly distributed on each plateThe cake is then cleaned from the filter material and used again for filtration process Features Of Zero Hold Up Filter Press Single pass filtration with no solid bypassFull batch recovery, no separate scavenging system neededProper sealing which allows the filtration of volatile, toxic, and inflammable products Suitable For Pharmaceutical industryBulk drugsDistilleriesBeverages Plate Pack Arrangement Ensures Any type of filtering media singularly or in combination can be used to achieve required micron efficiencyEasy removal and cleaning of the Cartridge Assembly Closed System Ensures Filtration of toxic, hazardous, explosive materialsEfficient cleaning and sterilization Central Feeding Ensures No solid inside the vessel, complete recovery of liquidsComplete cake retains over the plateReduced cost of expensive solventsUniform filter-aid bed can be formedCake solids can be maximum dried with N2

The Membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber. The replaceable membrane are either from Rubber or EP family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness. Due to Squeezing process the Membrane Plates offers following advantages.– Reduction in Moisture content in the final filter cake– Reduction in Filtration, Washing as well discharge time.– Reduction of washing liquid consumption due to more homogeneous cake structure.– Increased Uniformity in dewatering of the filter cake.– Improvement in cake release from the filter press.– Saving in filtration process cost and time. Membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

Plate and frame type filter press is used for filtering out the activated carbon treated glucose syrup. It is made of polyproplene recess CI body with capstan type closing mechanism. The carbon syrup is passed with considerable pressure by mean of a centrifugal pump to the filter press, the filter plates are covered with polypropylene woven filter cloth, glucose syrup is filter out through the filter cloth and activated carbon is stopped in the plate gap. The size of filter press depends on the filtration area required for the plant capacity.

The highly efficient automated advanced filter press we manufacture is equipped with features that make the range excellent for granites, marble & ceramic industries, gypsum, crystalline salts, pigments, dry precipitates, sludge generated from galvanizing plants containing chromium, zinc, aluminum, copper, nickel or cadmium, and many other applications. Automatic filter press has the following components: plate shifting & plate shaker for auto cake discharge plc based electrical control panel pneumatically operated control valves flow sensor and hydraulically operated bomb door drip tray how it works: a push button initiates the filtration process. Slurry is pumped into all chambers and cakes are formed as filtration begins to flow the end of filtration phase is automated by flow meter which is located on filtrate discharge pipe the flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase a plate vibrating device during the discharge phase ensures 100 pct release of the cake a plc controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment use of the most modern and advanced systems for operator protection and safety special features zero downtime saves 96 % of labour cost achieve final solid consistency at outlet upto 75% short cycle time: 8 to 30 minutes less capital expenditure : filter press & dryer can be planned smaller lower pollution control cost increased product yield improved process economy reduced space requirement fully automatic cycle manual mode option plc based controls upto 1500 x 1500mm plate size vibration system for cake drop drip tray system.

Description: ‘GMP FILTER PRESS’ is a sparkler type and consist of S.S. Shell & Top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable S.S. Trolley. Operation:The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper/fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid, if required the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance. SALIENT FEATURES : Manufactured in S.S. 304 / S.S. 316 / S.S. 316L M.O.C M.S / S.S. Jacket can be provided for hot filtration. Gives crystal clear filtration by filtering particles up to 1 micron size. Scavenger arrangement to remove all the liquid. Cake can be dried either by compressed air or by insert gas, steam. Filtration rates from 600 Litres/hr. to 30000 Litres/hr possible depending on the models. Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer. Sample collecting device & safety valve provided.

Automatic mechanical Filter Presses require only operation supervision. In short, YOTANA manufactures a complete range of filter presses, able to satisfy even the most difficult filtration requirements.