Lifting Jacks Dealers

AIRCRAFT LIFTING JACK - MAIN & NOSE ( TRIPOD ) TYPE VXAJ - 10900-MAIN VXAJ - 10825-MAIN CAPACITY 10 ton 10 ton CLOSED HEIGHT 1500 mm 750 mm HYDRAULIC LIFT 900 mm 825 mm TOTAL EXTENDED HEIGHT 2400 mm 1575 mm WORKING PRESSURE 200 kg cm2 200 kg cm2 TEST LOAD 15 ton 15 ton ACTION DOUBLE ACTION DOUBLE ACTION

This Tool is used for clamping the Conductor/Earthwire drums and capable to lift & hold in position the wooden/steel conductor/Earthwire drums having diameter of 2000mm and width of 1000mm. The clamping jaw are provided with tapered bushes to compensate for any difference in the bore size of the drum. Breaking arrangement is provided to the clamping jaws to hold the drum in position, whenever required. The clamping jaws are provided with auxiliary pointed screws to ensure positive griping action of the drum. The stand legs & base are made of heavy duty MS Pipe/Channel . The base frame is collapsible type for light weight and easy transportation. The Jack unit have Hydraulic mechanism consisting of mono block type with built-in hand operated pump unit having both arm individual cylinder control to facilitate in leveling both sided and thus keeping the drum in proper horizontal position while lifting. The braking arrangement  provided. Technical Specification Suitable for paying out cables during stringing conductors operations Tubolar steel construction with a protective coating Reel lifting by hydraulic jack. Disc brakes with interchangeables pads Support with oscillating shielded ball-bearings The frame is completely detachable to reduce dimensions during transport. Drum lifting jack suitable for Dia 2000mm and 1000mm width Weight: 415 Kg  

The main frame is of tubular steel structure with gear box and braking system, shaft is of high tensile steel.   Drum Lifting Jack  Hydraulic – Capacity – 6 Ton & 10 Ton The main frame is of tubular steel structure with double stage hydraulic cylinders operated by hand pump mounted on the main frame, having braking system and shaft is of high tensile steel.

We make available Hydraulic Lifting Jacks with load capacity of 1-10 Ton. All our payment methods are practical and convenient. A method is agreed upon by us with you at the time of undertaking to ensure no confusion or problem arises later on. Only high-quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement.

Binny jackrods and Automobile Bearing Lifting Jacks are an ideal solution if you have loads that need to be at a certain level in order to operate correctly. Such loads could be scaffolding or certain machinery that needs constant level checking. This load leveling (jacks) equipment would be suitable in the case of needing to lift machinery, or other such loads, in order to drop them onto leveling pads or their own sets of wheels, or simply to add leveling devices or adjust them to suit the operation.These jacks gives you the flexibility of being able to move your load directly from the lift jack units. In the case of scaffold, for instance, these jacks would be ideal because they can actually level the structure as well as move it to another area in just one operation.

AIRPORT GROUND SUPPORT EQUIPMENT - AIRCRAFT JACK  VANJAX OFFERS A COMPREHENSIVE RANGE OF HYDRAULIC AIRCRAFT LIFTING JACKS, DESIGNED AND DEVELOPED IN-HOUSE. THE JACKS SHOWN ALONG SIDE HAPPEN TO BE THE HEAVIEST CAPACITY JACKS IN TERMS OF LOAD LIFTING CAPACITY MADE SO FAR IN INDIA (CAPACITY 50 TON; EXPORTED TO USA). THERE IS ALSO A STANDBY HYDRAULIC HAND PUMP.   AIRCRAFT JACKS FOR CIVILIAN OR MILITARY AIRCRAFTS, FROM PERSONAL JETS TO COMMERCIAL JUMBOS SUCH AS BOEINGS 747 OR AIRBUS 380, HELICOPTERS, CAPACITY RANGING FROM 3 T TO 120 T (OR MORE) HEIGHTS FROM LESS THAN 200 mm TO AS HIGH AS 3500 mm, MADE TO ORDER, TRIPOD OR BIPOD AXLE JACKS OR INTEGRAL JACKS. USED EXTENSIVELY BY NATIONAL AIRFORCE, IAC, AIR INDIA AND INDEPENDERENDENT PRIVATE AIR CARRIERS.   VANJAX CAN DESIGN AND MANUFACTURE A WIDE VARIETY OF HYDRAULIC AIRCRAFT JACKS FOR THE AVIATION INDUSTRY BOTH COMMERCIAL AND MILITARY. THE AIRCRAFT JACKS CAN BE CUSTOM MADE IN A WIDE VARIETY OF CONFIGURATIONS - BIPOD, TRIPOD, AXLE JACKS, SINGLE STAGE, MULTI-STAGE TELESCOPIC LIFTS IN CAPACITIES RANGING FROM 3 T UPTO 120 T AND IN CLOSED HEIGHTS RANGING FROM 200 mm TO 3000 mm / MAXIMUM RAISED HEIGHTS UPTO 6000 MM.  

We present a wide range of Drum Lifting Jack which serves the industrial needs of client at great amount. Our products go through stringent quality test so as to ensure that they are of good quality. The jacks are highly durable and are manufactured keeping in mind the industrial requirements of clients. Attributes : Good qualityMade in compliance with industrial standardsGreat market demandUser friendly