Solar Cell Dealers

Solar Glass is one of the crucial barriers of traditional solar panels protecting solar cells against harmful external factors, such as water, vapor and dirt. What properties are expected from solar glass? High solar radiance transmittance The type of solar glass directly influences the amount of solar radiation that is being transmitted. To ensure high solar energy transmittance, glass with low iron oxide is typically used in solar panel manufacturing. Strength Solar panels are made of tempered glass, which is sometimes called toughened glass. There are specific properties that make tempered glass suitable for the manufacturing of solar panels. First of all tempered glass is much stronger than other types of glass. Secondly, tempered glass is considered safety glass. In case it breaks, it will shatter in thousands of small pieces, that won't be harmful. Both the strength and safety is important for the installation of solar panels. Durability Solar glass, as the front sheet of a pv module, needs to provide long term protection against the elements. Glass is used because it's well known for its durability, even though it has disadvantages as well. Anti-reflective (AR) Coatings An anti-reflective (AR) coating can be added to solar glass by plating one layer of anti-reflection film before the glass is tempered. The coating will improve transmittance by reducing the reflectance on the surface of the glass. The application of an AR coating on the glass surface can increase the share of sun irradiance effectively used for power generation by over 2.5%. Light-Trapping An alternative to an AR coating is Light-Trapping. A solar panel with this particular surface catches more solar radiation, mainly because not only direct sunlight reaches the solar cells, but also the less favorable, flat angle radiation is absorbed.

This glass is used for multi and mono crystalline solar photovoltaic modules. The content of iron oxide is significantly lower than in normal flat glass, which gives it a distinctive, nearly colourless appearance particularly when seen from the edge, and makes it a high solar energy transmitting glass. The textured surface helps to diffuse the light and inhibits the reflection of a part of the solar energy back into the atmosphere as compared to a polished surface, thus enhancing solar energy transmission. We manufacture two kinds of textured glass: prismaticmatt and mattmatt as per the customer's requirement. Our manufacturing and processing plants are accredited with ISO 9002 certification. The finished products conform to the standards of various national and international testing and statutory agencies. Our packing is widely recognized and acknowledged as one of the best in the industry.

We are offering thick film screens solar cell. Hybrid microcircuit solar screens usp's of thick film screens manufactured in technical collaboration with ms. Micro circuit enginneering corporation , u.s.a. consumables , stainless steel mesh, emulsion etc, are imported from overseas suppliers. mesh stretching on imported pneumatic stretching machine. complete thick film screen can be delivered in 4 working days our production, marketing and design department are trained overseas to give you complete soultion for thick film screens. stringent statistical quality control norms. expertise in supplying 'imaged, 'precoated', 'mesh only' screens and frames. uniform coating thickness. range of emulsions for various applications. long print life of screen. screen for fine line resolution printing. custom made frames.

Product Details: To meet the specific requirements of customers, we are engaged in supplying a large range ofMulticrystalline Solar Cell. We offer this cell to the clients as per the requirements of our valuable clients. This cell is used at various places owing to its easy installation and accurate dimensions. This cell is strictly checked at several parameters of quality to avoid any kind of defect by our vendors quality controllers. Customers can avail this cell from us at moderate price. Application: Easy to install High performance Durable

We are producing high quality Low lron Extra Clear Plain & Textured Solar Glasses used in production of P.V Modules & Solar Systems. This glass is used for multi and mono crystalline solar photovoltaic modules. The content of iron oxide is significantly lower than in normal flat glass, which gives it a distinctive, nearly colorless appearance particularly when seen from the edge, and makes it a high solar energy transmitting glass. The textured surface helps to diffuse the light and inhibits the reflection of a part of the solar energy back into the atmosphere as compared to a polished surface, thus enhancing solar energy transmission.   Our Range: • Textured glass • Plain glass  

High Grade Solar Cells - The highly efficient solar panels from Su-Kam generate more energy over the lifetime of your system as compared to other panels. Use of the highest quality ‘Grade A’ solar cells by Su-Kam results in greater power generation and extended module life.

solar energy is undoubtedly the fuel of the future and solar glasses have assumed centre-stage in the design of homes and buildings all around the world as countries compete to create renewable sources of energy. birkan engineering industries is the leader in design and manufacture of solar glasses which are manufactured from high quality industrial grade raw materials. We also offer solar glasses that can be customized as per the specifications laid down by our customers. durability, quality and energy efficiency are the hall marks of solar glasses that are manufactured by birkan engineering industries limited. Following are some of the features of solar glass that we manufacture: ♦ durability♦ perfect finish♦ easy maintenance   other product specification ♦ material: aluminum, silver♦ size: as desired♦ glass type: float glass

We bring forth high quality Solar Cells for our valuable customers. The Solar Cells are of excellent quality and known for low maintenance. Owing to durability and longer service life, our Solar Cells are highly in demand among our customers. Customers can avail the Solar Cells as per their requirements̢۪ within stipulated time. Known For : Longer functional lifeDurabilityResistant to severe climatic conditionsHigh efficiency

This glass is used for multi and mono crystalline solar photovoltaic modules. The content of iron oxide is significantly lower than in normal flat glass, which gives it a distinctive, nearly colourless appearance particularly when seen from the edge, and makes it a high solar energy transmitting glass. The textured surface helps to diffuse the light and inhibits the reflection of a part of the solar energy back into the atmosphere as compared to a polished surface, thus enhancing solar energy transmission. We manufacture two kinds of textured glass: prismaticmatt and mattmatt as per the customer's

he application options of our innovative photo voltaic modules are unlimited and hence the R&D that goes into making these units is also unmatched. We offer a great variety of solutions for this sector, so no matter how large or small the scale of your project is, we have the right solution for it. Our collaboration with the best international names in the sector has made our photo voltaic modules superior in all respects. At present our product range includes over 20 types of SPV modules and we are evolving faster to provide you with even more advanced modules in the days to come.Wide Range of modules from 3.0 wp to 250 wp,Designed to meet IEC, MNRE, UV, RDSO standards,Assembled with high efficiency crystalline silicon cells, laminated between glass and improved power tolerance,All solar cells are redundantly interconnected in series to increase integrity.

Low Iron Dolomite manufactured by Essem Metachem is of high purity with Very low Iron content (Fe2O3 54%) content. Low Iron Dolomite is widely used in Glass Making Industries, High transparency Glass & lens making, Cement Making Industries(Typical standard - MgO+CaO 50% min., Fe2O3 100ppm max.). Low Iron Dolomite is extensively used in an iron and steel plant in various processes. Our Low iron Dolomite is high in Demand by Steel and Iron Industries and by others who requied low iron content dolomite with high purity. Dolomite is used as a slag former, slag modifier and as a refractory material. The process of iron making is the reduction of iron ore to produce iron. Iron ore normally contain gangue materials such as silica (SiO2), Alumina (Al2O3) along with sulphur (S) and Phosphorus (P). Removal of these impurities is done by combining the gangue materials with CaO andor MgO to form slag which consists of low melting point complex compounds such as calcium silicate, calcium aluminate etc. CaO and MgO is charged along with other raw materials in the form of lime stone and dolomite or it is charged through sinter where again fines of dolomite is used.

FEATURES: . Mono-crystalline and Multi-crystalline are available . Manufactured with stringent control over quality . Tested against standard test conditions . Individually tested and grouped into specific grades . Multi-crystalline Silicon cells, size - 125mm X 125mm . Mono-crystalline Silicon cells, size - 156mm X 156mm

Flat glass is an integral component of many solar energy technologies, including solar thermal collectors, photo voltaic modules and concentrated solar power plants. The solar energy market for flat glass is one of high added-value glass products and a strong driver for innovation. However, despite Europe's technological lead, a crumbling European market and unfair trade practices in the entire value chain have severely hit Europe's production. Glass is designed to optimise solar energy conversion while providing long term protection against external conditions. Extra clear glass, with low iron oxide content is typically used in solar applications. Either float or patterned, low iron glass may be coated with an anti-reflecting coating to further increase performance. Transparent conductive coating can also be used as an electrical contact in some photo voltaic technologies allowing the light through to the photovoltaic material while conducting the general electricity out of the modules. Glass may also be toughened to increase strength and durability.Glass in solar thermal applicationsSolar thermal collectors are intended to collect heat - as opposed to photo voltaic panels which convert sunlight into electrical power. The collected solar heat can be used to supply hot water or heat ex changers, for domestic or industrial applications.There are various kinds of solar thermal collectors but most require a flat glass cover, or glazing, which serves not only to protect the panel while letting the sunlight through but also to prevent cooling of the panel from exposure to cold air.Glass in photovoltaic applicationsPhoto voltaic technologies are used to convert solar energy directly into electricity. There are many different technologies available to suit various requirements, from domestic systems to utility scale. Photo voltaic panels come in various shapes and colors offering flexibility for design integration and building integrated applications (BIPV).The most common photo voltaic technology is based on crystalline silicon solar cells. In this application glass acts as a protective outer layer, while transmitting the solar light to the photo voltaic cells interconnected underneath.Other photo voltaic technologies include thin film where solar cells are deposited as a sequence of thin films on glass. In these technologies, transparent conductive coated glass can be used as the front glass upon which the films are grown. The conductive coating not only allows light through to the photo active films, but also conducts the generated electricity out of the modules.Glass and mirrors in concentrated solar power SystemsConcentrated Solar Power (CSP) systems are used to produce electricity from the sun at utility scale. These systems are mainly used in regions with high levels of solar irradiance. CSP systems use lenses or mirrors to concentrate a large amount of sunlight onto a central receiver, thereby producing electricity either by concentrating the sunlight onto a high performance photo voltaic cell or by heating a transfer fluid to supply heat to a conventional thermodynamic power plant. For CSP systems, extra clear glass and mirrored glass are used to redirect accurately the maximum amounts of light towards the focal point.

Flat glass is an integral component of many solar energy technologies, including solar thermal collectors, photo voltaic modules and concentrated solar power plants. The solar energy market for flat glass is one of high added-value glass products and a strong driver for innovation. However, despite Europe's technological lead, a crumbling European market and unfair trade practices in the entire value chain have severely hit Europe's production.

Known for lasting for years with a maintained level of efficiency and output, the Photovoltaic Cell is made using the best grade mono-crystalline silicon. Being a Manufacturer, Exporter & Supplier of Photovoltaic Cell, the company offers a range that has a maximum power of 80 watts. The Photovoltaic Cells are covered with tempered glass and the number of cells varies from 36 to 72.

With 5,000 cells per hour, KUBUS has revolutionized soldering technology for crystalline solar cells. The innovative multi-stringer makes an important contribution to the future sustainability of your business � not only when it comes to increasing capacities. Expand your range of products through the production of 2, 3, 4 or 5 busbars � and remain free to choose your own raw materials and suppliers at the same time!

We are offering solar cell 200-220. type of cell: mono / multi crystalline silicon front face: tempered glass (low iron) encapsulate: ethylene vinyl acetate frame: anodized aluminium junction box: weather proof nylon 6 glass:tempered low iron glass.

We are one of the leading dealers and suppliers of a wide collection of high quality Crystalline Solar Cell, which is fabricated by the process of crystal growth or by casting in specially designed furnaces. The offered solar cell is manufactured using the best grade single or multi crystalline silicon material and is highly appreciated by our clients for its robust construction, optimum performance and longer service life.

Product Description Demonstration Solar Cell For demonstration purpose. The unit consists of a sensitive solar cell mounted on a box with 4mm sockets and ON/OFF switch. A mini-motor is mounted inside the box with its shaft protruding out on one side of the box. A plastic fan is mounted on the shaft. When switched ON with sufficient sunlight falling on solar cell, the motor rotates which can be observed from the rotation of the fan, showing conversion of solar energy into electrical and then into mechanical energy.