Air Monitoring Instruments Dealers

The innovative Rigel HEBAS sampling head uses the inertial impaction technology to maximize the effectiveness of standard culture media. The geometry of the HEBAS head is designed to precisely direct the sample air at a low velocity onto the culture media surface to assure high collection efficiency (validated according to ISO 146981 Annex B) while minimizing the severe stress and trauma of each micro-organism. In addition, contamination formed outside the controlled environment can be immediately and easily identified, significantly reducing the risk of false positives. HEBAS is made by AISI 316L Stainless Steel, fully autoclavable. The locking system is based on magnets, allowing ease, rapid and safe opening and closing operations. The used consumable is a standard 90 mm petri dish. HEBAS fully complies with ISO 14698, and it has been certified for efficiency by Health Protection Agency (Portodown – UK) according to ISO 14698-1 Annex B (report no. 80-10A).

Outdoor Ambeint Air Quality Monitors for SO2, H2S, NO, NO2, NH3, CO, CO2, Ox, THC, BTX (Benzene, Toluene and Xylene), VOC, Particulate Matters (PM10, PM2.5, PM1)

The increasing general awareness of atmospheric pollution and its hazards to the health and well-being of industrial workers is bound to result in greater stress on accurate, reliable and frequent assessment of work place pollution and worker-exposure. Spectro handy sampler sle-hs153 has been developed to fulfill this critical need. special features 1 battery operated pump runs for a full shift of 8 hrs. 2 rechargeable, maintenance free battery. 3 provision for the system to operate off the mains also. 4 digital timer to facilitate unattended operation. technical specification suction pump built-in rotary vane type. flow rate 0 – 3 lpm timer 3 digit display in minutes running time 1 – 999 min. delay time 1 – 99 min. power supply 230+/-10v ac, 50hz with battery charger and rechargeable batteries (2ah). operation time 10 hours with full charge, with sampling rate of 1 lpm. charge 15 hours or less. sampling train consisting of 2 nos., 35 ml glass impinges kept in ice tray connected with inert silicone tubing.

Continuous Air Monitor, Type: AM732A manufactured by Nucleonix Systems, designed using state-of-art electronics is primarily used for monitoring Alpha activity present in the form of suspended particulate in air. It is very much essential to monitor the quality of air in & around Radiochemical plants, reprocessing plants and other similar facilities. It essentially has an air suction system comprising of a suction pump, rotometers to measure air flow rate, Alpha suction chamber. This system has Alpha air-sampler detector assembly consists of a filter holder 60mm dia, a suction chamber with air inlet and outlet & detector housing fabricated with stainless steel. Alpha Detector consists of ZnS (Ag) deposited on loose mylar support of 50mm dia coupled to matched PMT with Pre-amplifier. Detector Efficiency achieved is of the order of 25% for Plutonium alpha particles over the entire window area. Collection efficiency better than 97% is achieved with this design. Suction chamber design facilitates the user to easily replace the filter paper(s) periodically as per the requirement.

The APM 154 system is a manual method for sampling fine particles (PM2.5 fraction) and is based on impactor designs standardized by US-EPA for ambient air quality monitoring. Ambient air enters the APM 154 series samplers system through an omni-directional inlet designed to provide a clean aerodynamic cut-point for particles greater than 10 microns. Particles in the air stream finer than 10 microns proceed to a second impactor that has an aerodynamic cut-point at 2.5 microns. The air sample and fine particulates exiting from the PM 2.5 impactor are passed through a 47 mm diameter Teflon filter membrane that retains the fine particulate matter. The sampling rate of the system is held constant at 1m3/hr by a suitable critical orifice. The standard system is supplied with a Dry Gas Meter to provide a direct measure of the total air volume sampled. As per recent Air quality standard published by Govt. of India where measurement of PM 2.5 dusts has been made mandatory besides other parameters for defining the quality of ambient air. An Impactor based PM10/2.5 Sampler has been manufactured by Lata Envirotech Services which meet requirements of PM 2.5 is sampling using APM 154; PM 2.5 concentration in ambient air can be measured gravimetrically by using this sampler. APM 154 fitted with brushless and noiseless pump assembly where sampling rates of 1m3/hr is maintained constant with the help of orifice.Special Features : PM10 and PM2.5 Impactors of sampler based on designs standardized by US-EPA Two part cabinet ensures that temperature of PM 2.5 filter remains close to ambient temperature. Diaphragm Pump with a low noise Lower sampling rate of 1m3/hr reduces filter choking even in areas having high FPM levels Critical Orifice maintains constant sampling rate of 1 m3/hour Sampler can run continuously 28 hrs monitoring Low power consumption Low weight essay to transport in field Can be measure PM10 or PM2.5 at a time Calibration Certificate for each instrument shall be provided with instruments Compact and portable. Weight - Approx 25 Kg.

Air quality monitoring involves the measurement of pollution in ambient conditions. Monitoring the air quality is important in protecting the health of populations and is performed by Ambient Air Quality Monitoring Stations (AAQMS) that are totally integrated with gas analyzers, particulate monitors, calibration equipment, data loggers and data reporting software. Ecotech provide a totally integrated air quality monitoring system or network of systems for all its world wide clients.

We are offering respirable dust sampler. Netel's model npm-hvs / r is designed to measure repairable suspended particulate matter in ambient air.it is used for collection of pm10 suspended particulate matter upto small as 0.1 micro size.it also has provision to collect samples of gaseous pollutants such as so2,nox, h2s,cl2 etc.

We are offering ambient air quality monitoring systems, an acclaimed name engaged in offering our precious clients a superior quality range of air pollution monitoring instruments for checking pollution in vehicles. Our offered instruments are manufactured by our adroit professionals using exceptional quality raw material and highly developed technology in fulfillment of the international quality standards. In accumulation to this, our provided instruments go through different tests under the direction of quality checkers to make certain their faultlessness. Clients can avail these air quality monitoring systems from us at market leading rates features: •compact design •trouble-free operation •accurate results •robust construction

The ACE Instruments make full-featured CPU based indoor air quality monitor is designed for small cooling and heating air handling systems in industrial, residential, office and commercial facilities. The IAQ monitor has a LCD display, showing the temperature, humidity & carbon dioxide values in succession of the area under surveillance.

Spectralab is manufacturer, supplier & exporter of handy sampler. Personal & work environmental samplers to collect air samples for analysis of pollutants.

We are a trusted and verified company offering various Industrial Indoor Air Quality Monitoring, validations and testing services for clean room facility. Our full range of testing and measurement instrumentation, we Perfect Pollucon Services conduct several tests as stipulated in the "Guidelines for Good IAQ in Office Premises" as written by ENV (Ministry of Environment). These tests are conducted as per defined guidelines and certification is provided on compliance to desired standards. Some of the tests are: Measurement of Physical Parameter · Relative Humidity · Respirable Airborne Particles · Temperature · Airflow VelocityVolumeAir-change rate Measurement of Chemical Parameters · Carbon Monoxide · Ozone · Carbon Dioxide · Volatile Organic Compounds (VOC) · Formaldehyde Measurement of Biological Parameters · Total Fungal Count · Total Bacteria Count In line with all our other testing and certification services, we submit a comprehensive and detailed report of all the findings and well as with recommendations), after completion of the tests and measurements. We Perfect Pollucon Services pride on our reporting format and we set the standards for excellence.

We have carved a niche as Manufacturer, Exporter and Supplier of Personal Dust Sampler in Delhi, India. Compact in design, battery operated, lightweight, our Dust Sampler comes with an in-built cyclone system not only to monitor total air borne dust as well abuts the respirable fraction of dust as well. Our Dust Sampler is accurate reliable and frequent, which is why it is a wise choice one can make to monitor the health risk of workers due to dust exposure.

Features it is designed according to the principle of multi jet holes particle impact and isokinetic sampling. And it gets the consistence of animalcule more accurately.it is an ideal air biological sampler for medicine plant, hospital, biological products, food machining, public place, etc. 1. Sampling hole has many small holes to reduce particles superposition and reduce error of animalcule count. 2. Programmable, sampling quantity can be set from 0.01 to 6.0 m3 (bk-bas-iv), 0.01 to 9.0m3 (bk-bas-v). 3. Lcd screen displays sampling quantity, sampling time,etc. 4.sampling time can be set automatically. 5. Up to 256 samples data storage of sampling time, sampling volume and other parameters. 6. Easy to change petri dish, just only take down sampling hole to change petri dish. (diameter:φ90×15mm) model bk-bas-iv bk-bas-v sampling volume 100lmin flow velocity of sampling holes 0.4ms 0.38ms basically the same as the clean room (isokinetic sampling) material aviation aluminum sus304 stainless steel structure pc board control,low noise pump sampling rechargeable battery dc7.4v6800mah dc14.8v5000mah operating time on battery(h) 6-8 power supply ac110v220v±10%, 50hz60hz external size(l*w*h)mm 120*195*300 235*220*180 package size(l*w*h)mm 190*380*420 400*380*220 net weight(kg) 2.5 4.8 gross weight(kg) 6 8.5

Personal air sampler with an appropriate sample head is designed to collect virtually any industrial contaminant including particulate samples like dust, fibres, fumes and mists as well as vapours and gases where a high flow rate is permitted. Air containing contaminants is drawn through the sampling head at an optimum rate. The suction is provided by a pump driven by DC Motor with dry or Rechargeable batteries. The flow rate is variable by the user to suit the sampling techniques. Rotary pump with corrosion-resistant vetted parts. Automatic Constant flow control. Multi-flow sampling capability. Pulsation free flow. Built-in flow indicator optional. Ultra-quiet operation. High timing accuracy of ± 0.05%. Electronic flow adjuster. Low battery alarm.

World Meteorological Organization (WMO) Commenced a BACKGROUND AIR POLLUTION MONITORING NETWORK (BAPMON) programme in July 1970, which was consolidated under GLOBAL ATMOSPHERE WATCH (GAW) in 1989. The objective of the WMO GAW programme is to The objective of the WMO GAW programme is to Make reliable, comprehensive observations of the chemical composition and selected physical characteristics of the atmosphere on global and regional scales. Provide the scientific community with the means to predict future atmospheric states. Organize assessments in support of formulating environmental policy. The Air Pollution Section, Office of the Additional Director General Meteorology (Research), I M D, Pune maintains a network of 10 GAW stations. New Initiatives Following equipment have been procured to bring the chemical analyses of rainwater at par with other WMO GAW stations: Atomic Absorption Spectrophotometer with Graphite furnace, Ion Chromatograph Microprocessor based pH and Conductivity Meters, Ultra -pure water purification System. One set of gas analysers (SO2 and NOx) for ambient air monitoring is installed at Pune. Aerosol Optical Thickness which indicates the columnar aerosol load of the atmosphere is measured at GAW stations. Single channel Volz?s sun photometer have been replaced with Microtop-II multi-channel sunphotometer (wavelength 368, 500, 675, 778 & 1028 nm) at Allahabad, Jodhpur, Kodaikanal, Nagpur, Portblair, Srinagar and Pune.

We are offering air sampler for pharmaceutical companies, for labs, for drug discovery companies, for pharmaceutical formulation companies, for checking the air contamination in the area.

We are offering High Volume Sampler, SLE-HVS123 Introduction Suspended Particles upto 100 microns have emerged as the most critical among all the criteria air pollutants & is caused by number of sources like:- 1 Large, medium & small-scale industries 2 Road dust construction activities, house hold fuel cooking, waste burning, vehicular emissions etc. In order to control the pollution, it is necessary to periodically monitor the air to determine the extent of pollution and to identify the source of emission SLEHUS123 is designed to meet these needs. This model confirm to guidelines of Central Pollution Control Board.