Automatic Compression Testing Machine Dealers

NAUGRALABS LABORATORY PRODUCT NAME: AUTOMATIC COMPRESSION TESTING MACHINE FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-120002 Description and Specification for Lab Tenders Automatic Compression Testing Machine.  Technical Description The Automatic Compression Testing Machine has all features of Micro Controller based Compression Testing Machine. In addition, it has: The machine is available in 500kN, 1000kN, 2000kN, 3000kN ranges. An automatic load release facility. A facility for transmission of data to the serial port of a computer placed with in 200 meters of the loading unit. Support for data transmission over distances upto several kilometers. This is useful for testing in the field. (Optional feature) Measurements of Strain with a resolution of upto 0.001 mm (optional feature). Measurement of Flexural Strength (optional feature) Facility to enter the required pace rate, at the beginning of the run. The load resolution is for is 0.1kN for machines upto 1000kN capacity & 1.0kN for the 2000kN & 3000kN machines. The Unit Comprises of: Loading Unit   The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided.   Pumping Unit   This has a two-speed hydraulic motor driven pump and a bonded strain gauge based pressure transducer.     This convert data transmitted by the digital head to a form recognized by the computer. The system is compatible with any computer with the following specifications: P-IV and above, 1.9Ghz 256 Mb RAM Intel Chipset with on-board graphics card. 40 GB HDD 1.44MB FDD & CD ROM DRIVE Standard Keyboard 1 Serial Port 1 Parallel Port Printer HP 5550 or latest UPS APC 500 VA or equivalent     Pumping Unit   This has a two-speed hydraulic motor driven pump and a bonded strain gauge based pressure transducer.      Geotextile Technology & Concrete Technology Lab equipment manufacturers,exporters and Geotextile Technology & Concrete Technology Lab suppliers

Product Code: EKE-323 Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec Class 1 starting from % 10 of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN 1338, EN 1340, EN 196 SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PC All ENKAY machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. ENKAY compression machines consist of their main parts: Frame, power pack and data acquisition & control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4; BS 1881 and ASTM C39 (with suitable platen set) standards. The ENKAY automatic range of compression testing machines has been designed to meet the need for reliable and consistent testing of concrete samples.

 Alpha Chem is manufactures,exporter & suppliers Automatic Compression Testing Machine. Automatic Compression Testing Machine : Automatic range of 1500kN, 2000kN and 3000kN capacity compression testing machines have been designed to meet the need for reliable and consistent testing of concrete samples. All machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. Compression machines consist of three main parts: Frame, power pack and data acquisition & control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4; BS 1881 and ASTM C39 (with suitable platen set) standards. Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec Class 1 starting from 10% of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN1338, EN1340, EN 196 SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PC Free of charge PC software for test control and advanced report printout Frame The frame is welded steel fabrication carrying the ball-seated 300 mm diameter upper platen which complies to EN 12390-4. Located on the loading ram which is protected from debris by a cover, the lower platen is marked for the centering of cube and cylinder specimens. The dimensions of the frame allow the testing of concrete cylinders up to 320 mm long x 160 mm diameter; 100, 150 mm and 200 mm cubes. All machines are supplied complete with 30 mm, 40mm, 50mm and 90 mm distance pieces. To test samples shorter than 150 mm extra distance pieces should be ordered. All machines are supplied with flexi-glass front and rear removable safety doors. All frames have a single acting up stroking ram with over travel protection to stop the motor when the maximum platen travel is reached. Power Pack The dual stage power pack which is designed to supply the required oil to the frames. Very silent power pack can load a specimen between 1 kN/sec to 20 kN/sec. A high delivery low pressure pump is used for rapid approach and a low delivery high pressure radial piston pump is used for test execution. On all power packs maximum pressure valve is used to avoid machine overloading. The main characteristics are: Dual stage pump 750 W power 25 litre oil capacity 60-100 mm/min fast approach speed Special Feature : 600kN,1500kN, 2000kN & 3000kN High stability welded assembly 50mm piston stroke with safety switch Platen hardness of min 55 HRC Distance pieces and safety door included

EN 12390-4, ASTM C39, AASHTO T22, IS : 14858 (2000) Automatic Test Execution Set test parameters - including load rate and Press the start button The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure Save the test including data results and load-time graph (Optional) Dual stage pump assuring fast piston approach and precise test execution Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22 Controllable pace rate from 1 KN/Sec to 10 KN/Sec. Inbuilt graph in the touch screen display. Auto stop and auto release after completion of each test. Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp Allow remote verification of settings and performances. For easy debugging of unexpected malfunctions. Complete IP based controller. Working on 240V, 50-60Hz, single phase. Frame Four column high stiffness welded frame tested for stability. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens Series TM-042-AA fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 150x300 mm and cubes up to 200 mm. Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request. Attachment for Paver block testing is available at extra cost. Safety Features Max. pressure valve to avoid machine overloading Piston travel limit switch (Extra cost) Emergency stop button Hardware 132,000 points effective resolution, touch screen graphic display 240 x 128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive test data downloadable to PC, Ethernet port, real time management software (optional). Optional Accessories at extra Cost Dedicated Data manager PC software

Product Code: EKE-323Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec Class 1 starting from % 10 of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN 1338, EN 1340, EN 196SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PCThe ENKAY automatic range of compression testing machines has been designed to meet the need for reliable and consistent testing of concrete samples. All ENKAY machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. ENKAY compression machines consist of their main parts: Frame, power pack and data acquisition & control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4; BS 1881 and ASTM C39 (with suitable platen set) standards.   Electrical Pumping Unit with Load Sensor and digital Indicator for Analogue Machines

Compliance With Following International Standards EN 12390-4, ASTM C39, AASHTO T22, IS : 14858 (2000) Automatic Test Execution Set test parameters - including load rate and Press the start button The machine automatically starts the rapid approach; switches to the test speed once the specimen comes into contact with the upper platen; automatically release the pressure upon specimen failure Save the test including data results and load-time graph (Optional) Dual stage pump assuring fast piston approach and precise test execution Test execution conforming to EN 12390-4, ASTM C39, AASHTO T22 Controllable pace rate from 1 KN/Sec to 10 KN/Sec. Inbuilt graph in the touch screen display. Auto stop and auto release after completion of each test. Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp Allow remote verification of settings and performances. For easy debugging of unexpected malfunctions. Complete IP based controller. Working on 240V, 50-60Hz, single phase. Frame Four column high stiffness welded frame tested for stability. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens Series TM-042-AA fitted with 300 mm dia. platens which are suitable for testing cylinders up to dia. 150x300 mm and cubes up to 200 mm. Surface hardness of platen is 55 HRC, flatness tolerance 0.03 mm. Traceable certificate of surface hardness available on request. Attachment for Paver block testing is available at extra cost. Safety Features Max. pressure valve to avoid machine overloading Piston travel limit switch (Extra cost) Emergency stop button Hardware 132,000 points effective resolution, touch screen graphic display 240 x 128 pixel, sampling rate 50/sec, large storing capacity on USB pen drive test data downloadable to PC, Ethernet port, real time management software (optional). Optional Accessories at extra Cost Dedicated Data manager PC software

Automatic Compression Testing Machine : Alpha Chem is manufactures,exporter & suppliers Automatic Compression Testing Machine. Automatic Compression Testing Machine : Automatic range of 1500kN, 2000kN and 3000kN capacity compression testing machines have been designed to meet the need for reliable and consistent testing of concrete samples. All machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. Compression machines consist of three main parts: Frame, power pack and data acquisition & control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4; BS 1881 and ASTM C39 (with suitable platen set) standards. Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec Class 1 starting from 10% of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN1338, EN1340, EN 196 SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PC Free of charge PC software for test control and advanced report printout Frame The frame is welded steel fabrication carrying the ball-seated 300 mm diameter upper platen which complies to EN 12390-4. Located on the loading ram which is protected from debris by a cover, the lower platen is marked for the centering of cube and cylinder specimens. The dimensions of the frame allow the testing of concrete cylinders up to 320 mm long x 160 mm diameter; 100, 150 mm and 200 mm cubes. All machines are supplied complete with 30 mm, 40mm, 50mm and 90 mm distance pieces. To test samples shorter than 150 mm extra distance pieces should be ordered.

Our range of automatic compression testing machine, digital compression testing machine are high performing. These machines are extremely stiff and rugged in construction. These machines ensure the required high rigidity and stability. Our digital computerized compression testing machines are durable, easy to use and maintain, and designed for heavy continued use.

The machine is designed to carry out compression tests on materials like concrete, cement as well as finished products like tiles, bricks, blocks and other relevant materials. The machine can be used for quality control departments, civil test laboratories, engineering colleges And are adeally suitable for on-site testing for quality control and/or laboratories.   We Upgrade all types of imported testing machines like INTRON, ZWICK, TIRA, HONSFIELD,UNITED and Indian like FIE, FSA, STAR etc, with following advantages :-• Machine becomes computerized with digital load indication in kg / N / Mpa with real time graph on PC • Avoids tedious evaluation of proof stress. Gives 0.1 - 1% proof stress values & stress / stress graph• Plot of Load vs % elongation for elastic materials for rubber / plastic using our Long Travel Ext’meter• Highly accurate. No manual Intervention. Totally error free working.• Mechanical working ( with dial ) of machine remains unchanged and can still be used.Why MCS make Universal Testing Machines? :-• Up to date knowledge of all the latest Indian & International testing standards and ability to implement in the machines / software supported by  strong in-house R&D setup.• Future proof indigenously designed hardware/software, sensors, extensometer, control panel• State of the art manufacturing facilities supported by excellent after sales support• Installed our systems / packages in more than 40 NABL accredited Laboratories in India. We supply testing machines for testing of materials like steel, cement, copper & ACSR conductors, cables, polymers, rubber, insulators, ceramic, glass, plywood, fastners, wire / nylon ropes. We look forward to have an opportunity to serve your company in near future.Technical Specification :-Automatic Compression Testing Machine ( ACTM )Computer-controlled using EIA-485 communication standard. Online plotting of runs being taken by the ACTM Advanced data acquisition, analysis and report generation ACTM software tool with run database management.Digital Display Unit ( DPU )Dynamic display of pace-rate on a LED bar-graph for monitoring the quality of control. On-board memory for storing up to 250 runs. Auto-shutdown when the sample breaks or the maximum load is achieved. Independent LVDT attachment.Micro-Controlled CTM ( μCTM )Intelligent DSP-based Pace Rate Controller. Digital PID feed back control with high torque stepper motor as an actuator. Fully configurable feedback control parameters. Automatic Load Hold and Resume facility. Facility for user-defined pace rate in kN / mm.User InterfaceFront panel LCD for status & menu displays. 4-digit indicator for load (kN) & strain (mm) display selectively. LED Bar graph for pace rate quality monitoring. 8-button front panel keypad.Hardware FeaturesAccurate pace rate control through DSP-based feedback.Data integrity & validation facility for calibration data. Precision pressure & strain sensing using 16-bit ADCs. Rugged military-grade back panel connectors suited for demanding on-site conditions. EIA-485 to EIA-232 converter module.Data AcquisitionOnline run data acquisition & plotting. Advanced Graphical User Interface. Multiple logins & selective access control.CTM models comparison chart. Analysis and Report Generation