Enkay Enterprises Rajendra Place, Delhi

With excellent storage facility, we can effortlessly fulfill urgent and massive requirements of the customers. Also, we maintain complete records of the delivered products. We are instrumental in offering the products in premium packaging material that is certified by the experts, followed by stern packaging of the products by the professionals.   Features : Ergonomic makeup Controlled by PLC Smooth working Highly efficient performance

We have parted our infrastructure into several units and one of them is warehouse wherein we keep a huge stock for furnishing urgent and quick requirements of the clients. Dedicated to bringing forth the finest and premium quality Worm & Sector Type Steering System, we are a well-established Supplier in this domain.This system is easy to install and thus saves money and time and it is also available in various sizes. 

Stationed in Delhi(India), our company is one of the most sought after entity in the industry. Our Worm & Roller Type Steering System has high resistance against mechanical impacts and has a long lasting durability. For keeping the quality of the products intact, our quality experts check all levels including procurement of raw materials, production, packaging, and dispatch.

Product Code: EKE 2401 (B)Window air conditioner is becoming now a day’s necessity. The unit demonstrates the application of window air conditioner & evaluation of its performance. It consists of a small room to which a small air conditioner is connected the room is provided with a transparent front cover with a heater inside to simulate heat load in the room. Various measurements are provided so that performance of system that is COP of system, actual & theoretical cooling capacity of system & power consumption of unit with different load conditions.Specifications: Compressor - Hermetically sealed, Kirloskar make, having the capacity of 1/10 ton of refrigeration using R-12 refrigerant to keep room temperature between 20 to 30 c. Condenser - Finned tube type, with forced air flow over the tubes, Capillary tube of matched length as expansion device. Evaporator - Finned tube type with forced air flow, Room – 0.6 X 0.7 X 0.7 m. height, provided with transparent front wall. A heater with input control is provided inside the room. Which simulates different load conditions. Measurements and Controls H.P. / L.P. Pressure gauges Digital temperature indicator to measure the temperatures at various points. Energy meters to measure input to compressor & heater. High and low pressure cutout. Thermostat to put off the compressor at set room temperature. Necessary switch for electrical components. Services Required: Floor area of 2m X 1 m. 230V, 15AC stabilized supply with earthing connection

Product Code: EKE 2410 This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.   Window Air Conditioning -(Actual Cut Section)

Wet & dry thermometer has a strong white plastic body with dimensions [30 cm x 9 cm x 2.5 cm] and 159 gm weight. We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. With us, one can stay completely assured for top-notch quality products that are designed and developed using the premium material and cutting-edge techniques. Also, we ensure that the material is sourced from the reliable places only.

We take care of all the raw materials used in the product manufacturing and designing. The inputs (raw material) used are quality certified and are remarkable for the production. Our team of quality examiners conducts stringent tests for ensuring the product quality.   Features : Feedback pressure control P, P+I, P+I+D controller action Inbuilt safety measures SCADA software Powerful design User friendly Increased electrical safety Leak proof safety measures Avail with training manuals and mimic charts M.S powder coated cubical plant System frame with caster wheel arrangement

Our organization stocks the items in mass. Therefore, we can serve mass/ retail requirements without hassle and make sure delivery of products is swift. Affordable price and high quality are the major attributes owing to which our Water Level Control Trainer - PLC Based is highly in demand amongst buyers.   Features : Inductive/ Capacitive proximity switches Relay and motor operated door M.S powder coated frame Sturdy design Turnkey system Two line display Transparent acrylic level tank Side mounted miniature level switches Electrical control panelComputerized control system 8 DI/Do configurations Ladder diagram programming LED indicators Solenoid valves LCD Display

Product Code: EKE 2104The apparatus consists of a forced draught, counter flow type-cooling tower. A blower supplies cooling air. Air enters the tower at the bottom. Hot water is, obtained from a geyser. Hot water is sprayed over the mesh packing through the nozzles and it flows downwards. Evaporative cooling of water occurs due to the current of air and water gets cooled. This student can study the operation of cooling tower and calculate the energy balance.Specifications: Cooling tower, fabricated of M.S. Sheets, 200 X 200 mm. cross section, 1.2m. height with Perspex front. Wire mesh packing is provided in the tower. Geyser - 3 Kw Capacity to provided hot water. Centrifugal blower, 1 HP capacity to force air through the tower. Multichannel Digital Temperature indicator to measure temperature at various points. Rotameter to measure inlet water flow. Measuring tank to measure outlet water flow. Calibrated orifice and water manometer to measure airflow. Arrangement to measure dry and wet bulb temperatures of air at 5 intermediate stations. A technical manual accompanies the unit. The unit Is provided with anticorrosion an attractive color powder coating. Services Required: 440V, 32A, AC supply with neutral and earthing connection. Floor space of about 2m. X 1.5m. Water flow of 10 Ht./min. at constant head

Vicat Softening Point Apparatus is used for determining the softening point of Polythene. The Vicat Softening Point is the arithmetic mean of the VSP of the test specimens. The apparatus consists of a heating bath, sample holding stand and a stirring rod. The heating bath is a double walled vessel. A glass stirring rod, one 1 kg weight and one EKE 072 Dial Gauge 0.01 x 25 mm are supplied. The rate of increase of heat is controlled by a Sunvic Energy Regulator supplied alongwith the apparatus.Details Product Code: EKE 901 Standrad : IS:2750 Suitable for operation on 220V, 50 Hz, Single Phase, AC supply

Catering to the requirements of the customers; we are a renowned Supplier of Vicat Needle Apparatus. Quality raw materials have been used for the production of our entire range. As a dependable name, we procure these raw materials only from trustworthy sources present in the market.   Details Product Code: EKE 394 Standrad: IS : 5513 EKE 39301 Vicat Mould EKE 39302 Glass Base Plate EKE 39303 Initial Needle (in Plastic Case) EKE 39304 Final Needle (in Plastic Case) EKE 39305 Consistency Plunger (in Plastic Case) EKE 39306 Mild Steel Base Plate EKE 39307 Vicat Mould, Split Type, with Clamping Ring

ApplicationsThe measurement and control of load including: Load in rockbolts, tie backs, foundation anchors and tunnel support Tension in cable anchors and multistrand tendon anchorsOperating PrincipleThe vibrating wire load cell comprises a set of three or six vibrating wire gauges, mounted parallel to each other equally spaced in a ring in an alloy steel cylindrical housing. The method of construction results in a very robust instrument suitable for use where high performance, longevity and mechanical strength are important. A heavy gauge, multicore, sheathed cable connects the cell to the readout unit. The mode of operation is by electrical plucking of the vibrating wire. The change in load acting on the load cell is proportional to the difference of the squared frequency of vibration for the corresponding load. The readings are taken on EKE 871, EKE 875 or EKE 878 DataloggersAdvantages Accurate, robust and very good long term stability Negligible temperature effects compared with oil filled load cell Fast response time Accuracy unaffected by cable length Suitable for remote readings Capable of reading eccentric loads Common readout for all vibrating wire type instruments InstallationTensile loads in rockbolts and cables are measured by installing Centre Hole load Cells between the rock/concrete face and the tensioning nut of the bolt or anchor. For the most reliable results, a concrete bearing pad should be cast, with its upper face flat and perpendicular to the bolt or cable. A bearing plate is placed beneath the cell to spread the load and to take up any residual nonalignment. A further bearing plate is placed between the cell and anchor. The assembly is centralised and held in place by applying a small tension to the bolt or cable. Fault in centralisation or alignment will be apparent from differences in load readings at each of the vibrating wire gauges in the cell. In situations where speed of installation is important, the bearing pad may be formed using high alumina cement or resin grout. Readings of the vibrating wires are averaged to obtain the bolt or cable tension. In multi-strand cable anchors, it is possible to tension the strands uniformly, by monitoring and balancing the load reading for each of the vibrating wire gauges.Product Code: EKE 831 to EKE 836Operating Principle The vibrating wire load cell comprises a set of three or six vibrating wire gauges, mounted parallel to each other equally spaced in a ring in an alloy steel cylindrical housing. The method of construction results in a very robust instrument suitable for use where high performance, longevity and mechanical strength are important. A heavy gauge, multicore, sheathed cable connects the cell to the readout unit. The mode of operation is by electrical plucking of the vibrating wire. The change in load acting on the load cell is proportional to the difference of the squared frequency of vibration for the corresponding load. The readings are taken on EKE 871, EKE 875 or EKE 878 Dataloggers Advantages Accurate, robust and very good long term stability Negligible temperature effects compared with oil filled load cell Fast response time Accuracy unaffected by cable length Suitable for remote readings Capable of reading eccentric loads Common readout for all vibrating wire type instruments InstallationTensile loads in rockbolts and cables are measured by installing Centre Hole load Cells between the rock/concrete face and the tensioning nut of the bolt or anchor. For the most reliable results, a concrete bearing pad should be cast, with its upper face flat and perpendicular to the bolt or cable. A bearing plate is placed beneath the cell to spread the load and to take up any residual nonalignment. A further bearing plate is placed between the cell and anchor. The assembly is centralised and held in place by applying a small tension to the bolt or cable. Fault in centralisation or alignment will be apparent from differences in load readings at each of the vibrating wire gauges in the cell. In situations where speed of installation is important, the bearing pad may be formed using high alumina cement or resin grout. Readings of the vibrating wires are averaged to obtain the bolt or cable tension. In multi-strand cable anchors, it is possible to tension the strands uniformly, by monitoring and balancing the oad reading for each of the vibrating wire gauges.EKE 831 to EKE 836Comprising alloy steel cylinder with three gauges at 120º in the cylinder walls. Each gauge is fixed with non-slip cylindrical end clamps. Electromagnetic pulsing and sensing units with, over voltage surge arrestors are mounted adjacent to each wire on the outer face of the cylinder. The entire unit is then protected by an outer zinc plated steel sleeve with ‘O’ ring seals.Same as EKE 831 to EKE 836, but with six parallel Vibrating Wire Gauges, located 60º apart in cylinder wall. Centre Hole Bearing Plates Centre Hole Bearing Plates comprising epoxy painted steel discs with central hole for use with EKE 831 to EKE 839 load cells for monitoring tension in rockbolt or cable anchors. The plates incorporate three location dowels to assist concentric mounting of the load cell. Details of dimensions as tabulated Installation Accessories EKE 83131 Connecting Cable For use with EKE 831 to EKE 836 Vibrating Wire load Cells. Six Conductor Copper Wire, insulated colour coded and screened with sheathing EKE 83731 Connecting Cable for use with EKE 837 to EKE 839 Vibrating Wire load Cells, twelve Conductors, copper wire insulated, colour coded and screened with sheathing EKE 83125 Splicing Set To be used with EKE 83131connecting cable EKE 83725 Splicing Set To be used with EKE 83731 connecting cable Product Code: EKE 837 to EKE 839 Details Same as EKE 831 to EKE 836, but with six parallel Vibrating Wire Gauges, located 60º apart in cylinder wall. Centre Hole Bearing Plates Centre Hole Bearing Plates comprising epoxy painted steel discs with central hole for use with EKE 831 to EKE 839 load cells for monitoring tension in rockbolt or cable anchors. The plates incorporate three location dowels to assist concentric mounting of the load cell. Details of dimensions as tabulated : Installation Accessories EKE 83131 Connecting Cable For use with EKE 831 to EKE 836 Vibrating Wire load Cells. Six Conductor Copper Wire, insulated colour coded and screened with sheathing EKE 83731 Connecting Cable for use with EKE 837 to EKE 839 Vibrating Wire load Cells, twelve Conductors, copper wire insulated, colour coded and screened with sheathing EKE 83125 Splicing Set To be used with EKE 83131connecting cable EKE 83725 Splicing Set To be used with EKE 83731 connecting cable

This is due to our streamlined packaging system that we are able to meet the customized and standard packaging requirements of the clients. Moreover, we ensure complete safety of the products. We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items.   Features : Available with training manual and charts Robust construction User friendly Simple operation Low maintenance Self explanatory system Compact design System   Design Size of valve : 1 Cut section of different type like ball valve, globe valve, gate valve, butterfly valve, horizontal NRV, vertical NRV, needle valve, flow control valve, solenoid valve, pneumatic diaphragm type

The unit is compact with in-built timer to control duration of penetration presetted in factory to 5 seconds. The instrument is provided with leveling screws. Product Code : EKE 512-2.

This equipment is used for determining unconfined compressive strength of intact rock core specimens. The rock sample is cut to length and the ends are machined flat. The specimen is placed in a loading frame and if required heated to the desired test temperature. Axial load is continuously increased on the specimen unit peak load and failure are obtained.Details : Product Code: EKE 217-S2 Standrad: ASTM 2938 Load Frame : EKE 065 Capacity : 200 kN?Speed : 12 Providing Ring : 100 kN - EKE 275 Platens, Spherical Seating / Rigid Seating - As per ASTM - 2938 requirements

Country of Origin : India

Number Of Flower : Unconfined Compression Test Apparatus

Material : Mild Steel

Certification : ISO 9001:2008

Application : Compression Testing

Country of Origin : 220V

Condition : New

Dimension : 340mmx330mmx475mm

Power : 1KV

Driven Type : Electric

Phase : Single Phase

Total Carbohydrate : 1yrs

Temperature : 0-50°C

Vacuum range : 150-300mm

Product Code: EKE 2101The test rig comprises of a two-stage air compressor fitted with an air tank with orifice, pressure gauges 9 an energy meter to measure the input & a Temperature indicator measures the temperatures at various points. The compressor is mounted on air receiver along with the motor, and is provided with air relief valve (safety) and a pressure switch. The unit determines volumetric efficiency and isothermal efficiency at various discharge pressuresSpecifications:Air compressor - Double cylinder, two-stage type driven by a 2-hp. Three - phase motor mounted on air receiver provided with delivery valve.Air tank and orifice with water manometer for air intake measurement.Pressure gauges at outlet on both stages.Digital temperature indicator.Energy meter to measure input power.A technical manual accompanies the equipments.Services Required:Floor space of 2,5 X 1.5m.440 V, 15A, 3ph. AC supply with neutral and earthing connection.A hand tachometer.

Raw materials are the inputs which are used for the production of the finished goods and thus it becomes essential for us to check the quality of the inputs before procurement. Thus, our experts do the needful. Our products are subjected to the payment terms & conditions of our company. Patrons are provided with the terms & conditions, and can make purchases with a payment method best suited for them.. Triple Beam Balance 2610 capacity x 0.1g sensitivity. Complete with stainless steel pan and set of weights. Product Code : EKE 11039

With our brilliant logistics network, we can furnish urgent and massive requirements of the buyers with ease. Being a quality-conscious firm, we are offering nothing short of the best quality products from Delhi(India).   Features : Compact design Equipped with training manual Modern industrial components Mounted on inclined perforated table with proper acrylic door Locking arrangement available

Our company offers convenient payment choices. We are well versed with diverse payment methods. Whether online or offline, patrons can make payments as per their convenience. Well-established as a notable name, we cater to the demands of customers from Delhi(India) to every nook and corner.   Features : Compact design Robust construction Comprehensive training manual Modern industrial components Items mounted on inclined perforated table Proper acrylic door and locking arrangements

The permeability of concrete at the surface (concrete cover) has been recognized as a major factor in determining the durability of concrete structures. Many specialists emphasize the importance of this property and the possibility of measuring it reliably - not only in the laboratory but also at the building site.Technical Information Basic Unit Display Unit with Nonvolatile Memory for 200 Measured Objects Display - 128 x 128 graphic LCD Interface - RS 232 or with adapter to USB Software - Integrated for printing out measured objects and transmission to PC Batteries - 6 1.5 V, LR 6 batteries for 60 hours operation Temperature Range - -10° to +60° C Carrying Case - 325 x 295 x 105 mm, total weight 2.1 kg Control Unit with Membrane Pressure Regulator and Pressure Sensor Vacuum Connection - Small flange 16 KF Carrying Case - 520 x 370 x 125 mm, total weight 6.3 kg The unit is operated with a commercial vacuum pump. Technical data according to DIN 28400 -  Suction capacity 1.5 m³ / h, final total pressure 10 mbar Suction-side connection: small flange 10 KF / 16 KF, high water vapour toleration.

Product Code: EKE 2607 Three Hinged Arch Apparatus The mild steel model has a span of 100cm and rise 25cm, with hinges at supports and crown. One of the ends should rests on rollers. Along the horizontal span of the arch various points are marked at equidistant for the application of load. This being a statically determinate structure, the horizontal thrust developed under the action of any load system can be theoretically calculated and will also be measured directly by neutralizing the outward movement of the roller end. A dial gauge with 25mm travel (with magnetic base) may be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights Three Hinged Arch Apparatus

Product Code: EKE 2114 A heavy bench top unit for studying the stress and strain in a thin walled cylinder under internal pressure. A thin walled cylinder is mounted between two support blocks. Internal pistons and seals create oil sealing. A handwheel at one end of the apparatus enables the cylinder end conditions to be adjusted to either open or closed. The internal pressure is adjusted by means of a hydraulic hand pump on the apparatus. An analogue pressure gauge displays the internal pressure whilst a pressure transducer gives feedback to the Data Acquisition Interface and Software supplied. Strain gauges are arranged on the external surface of the cylinder to measure the radial and circumferential surface strain. The strain gauges are at various angles. Thin Cylinder Apparatus

Product Code: EKE 2322The Unit helps in calibrating given thermocouple for the range 0°C to 100°C. While calibrating, thermocouple is once dipped in ice for 0Q C and then in boiling water for 100°C. This is done till the thermocouple shows the actual temperature of ice (0° C) and boiling wafer (100°C) and a linear calibration is set. A mV meter is provided to know the corresponding voltage.Specifications: A digital mV Meter and a digital temperature indicator with 2 different type of thermocouples. A water container with heater of 1 KW. A technical manual accompanies the unit. Services Required: Table surface area - 2 m X 1 m X 0.5 m height. 220V, 50hz. Stabilize Electric Power Supply. Ice cubes - 0.5Kg. Approx.  

Product Code: EKE 2318The apparatus consists of a copper bar, which is heated at one end, a heat sink is provided at other end. The test section of bar is properly insulated and thermocouples are attached along the length of bar. Heat conducted through the section of bar is measured by heat collection in water-cooled heat sink. A panel comprising of controls and measurements is provided, which provides easy operation and sturdy mounting of unit. Specifications Metal Bar - 25mm of adequate length, provided with 8 Thermocouples along the length, Band heater at one end and water-cooled heat sink at other end. Test portion of bar is insulated. Instruments panel comprising of. Voltmeter - 1No. Ammeter - 1No. Dimmerstat 0-230v, 2A, capacity. Multichannel Digital temperature Indicator. Measuring flask and stop clock Services Required Bench area of 1.5m. x 1m. at working height. 230 v, AC, electric supply with earthing connection. Water supply at the rate of 2 lit/mm