DC Shunts Dealers

(50 products available)
  • DC Shunts

    DC Shunts

    Get Price Quote

    • MaterialMetal
    • ApplicationIndustrial
    • AccuracyClass 1
    • DurabilityLong Life
    • Surface FinishingPolished
    • ResistivityRust Resistant
    • We stand in the midst of leading Direct Current Shunts Manufacturers, based in India. ME Dc Shunts are available for current ratings from 5-10000 Amps and mill volt drops of 75 milli volts. (Other voltage drops can be provided at request) The Shunts confirms to IS Standards 1248 ME Dc Ammeter Shunts consist of Mangenin rods soldered or silver brazed to brass end blocks. The shunts are artificially aged after manufacture and then tested on full load. Shunts are supplied with leads of 0.025 ohms. The lead resistance is taken into account while calibrating the shunt. Overload: Shunts are capable of withstanding temperatures upto 120 C without any permanent alterations in physical or electrical properties. Overloads and faults which results in temperatures of this magnitude can be safely handled All 75 milli volts drop shunts of class 1, withstand the following overload Requirements : 2 X rated current for 3 minutes. 4 X rated current for 30 seconds. 10 X rated current for 5 seconds. Temperature Co - Effecient : 0.002% per degree centigrade, above ambient temperature in still air, with free ventilation. Temperature not exceeding 120°C at the center and 90°C at the ends.
    ...more
    www
  • DC Shunts

    DC Shunts

    Get Price Quote

    For the convenience of the clients, we issue an invoice to them including the details of the sale transaction as well as indicating the quantities, products as well as agreed price. Thus, we maintain transparency in our dealings and payment procedures. We are a quality-conscious firm and for maintaining product quality, we consider several measures so as to ensure that only flawless lot reaches the buyers.
    ...more
  • DC Current Shunt Sensor 100A 75 MV

    DC Current Shunt Sensor 100A 75 MV

    380 / Piece

    • Number Of FlowerDC Shunts
    • ApplicationIndustries, Labs
    • Maximum Current Capacity100A
    • Output Voltage75mV
    • Accuracy0.002%
    • UsageMeasurement
    • Accurate measurement usable in industries, labs with negligible ambient temp. effect. (0.002 % /C
  • Telecom DC Shunt

    Telecom DC Shunt

    Get Price Quote

    • Country of OriginIndia
    • ApplicationIdeal For Panel Mounting Or Integration Into Telecom DC Distribution Boards
    • Number Of FlowerDirect Current Shunts
    • Range30A To 10000A
    • Accuracy1.0 Or 1.5
    • Current Ranges5A To 1000A
    • Accuracy Classes0.1% To 1.0%
    • Operating VoltageUp To 75V Or 110V DC
    • Telecom DC Shunts are typically rated for current ranges from 5A to 1000A or more, with voltage drop outputs commonly standardized at 50mV, 60mV, 75mV, or 100mV. They are constructed using manganin or nichrome alloy resistive elements for excellent thermal and electrical stability, mounted on insulating bases such as bakelite or epoxy resin. The terminals are designed for secure connections with copper busbars or cables, and the shunt body ensures minimal temperature drift for consistent accuracy. These shunts comply with standards such as IS 1248, IEC 51, or BS 89, with accuracy classes ranging from 0.1% to 1.0%. Their compact and rugged construction makes them ideal for panel mounting or integration into telecom DC distribution boards. Operating voltage is typically up to 75V or 110V DC, and they are engineered to withstand transient conditions while maintaining stable output for precise monitoring via digital or analog ammeters, controllers, or PLC system
    ...more
  • DC Shunts

    DC Shunts

    Get Price Quote

    • Continuous over load 20% rated current
    • 5 seconds withstand10 times for 1 A to 500 Amp. 5 times for 600A to 2000Amp. 2 times for 2500A to 15000Amp
    • Temp. Coefficient0.002% per °C.
    • Ambient temp.23°C.
    • Operating temp. -10°C to 55°C.
    • Storage temp.-20°C to 70°C
    • Maximum load The load should not exceed 0.1% of the nominal current rating for specified accuracy.
    • The Yokins shunts are available from 1A up to 15000A with an accuracy of 0.5% & 1% as per ISI248. Standard voltage drop is 50mV, 60mV & 75mV. Intermediate current ratings, other voltage outputs, better accuracy and purpose built shunts can be supplied.ApplicationShunts provide an accurate DC milli volt signal to drive ammeter indicators, overload protection and control devices, especially for higher amperage. It supplies Voltage drop proportional to the DC current which is measured and indicated by a moving-coil milli voltmeter with the dial calibrated in Amps.Operating principleA current passing through the Shunt produces a proportional voltage drop. A moving coil instrument connected to shunt measures the voltage drop across the shunt terminals.Shunts are calibrated in such a way that they produce an accurately defined voltage drop (50mV, 60mV, 75mV and 150mV).  Compact Low cost shuntsWe offer compact low cost shunts as well. These shunts are often requested for special applications for small size or low cost applications. We generally recommend continuous load of ½ or 2/3 times the rated current, in these shunts. These can also be provided from 1A upto 15000A with an accuracy of 0.5% & 1%. Standard voltage drop applicable is 50mV, 60mV & 75mV.     Technical Specification for shunts as per IS 1248 :  
    ...more
  • Electrical DC Shunts

    Electrical DC Shunts

    100 - 150 / Piece

    • Brand NameAEL
    • Purchasers can place wholesale or retail orders with any time of the year and expect timely arrival of deliveries. We have installed a large storage facility wherein we keep a large stock of the offerings. This facility helps us in keeping the entire lot away from the damaging factors like moisture, sunlight, dust, rain, etc.   Features : Rating 1A to 15000A Riveted and soldered construction In-line bus bar mounting Very low temperature coefficient High overload withstand Shock and vibration tested Long term stability
    ...more
    www
  • Air Cooled DC Shunt

    Air Cooled DC Shunt

    Get Price Quote

    We are offering air cooled dc shunt. The air-cooled dc shunt type 9410 covers a wide range of current from 1.5 ampere to 3000 ampere. The shunts are constructed from high grade manganin. The manganin strips are mounted on all the current terminals with the help of high quality silver brazing solder wire. The entire dc shunt is mounted on a strong base and whenever required is fitted with a protecting cover to enable the convection currents to keep the dc shunt cooled to the ambient temperature.
    ...more
  • DC Shunt

    DC Shunt

    Get Price Quote

    • Usage/ApplicationElectronic Instruments
    • Output Voltage60 mv
    • DesignSmps
  • DC Shunts

    DC Shunts

    Get Price Quote

    We are offering shunts. Shunts are used with moving coil ammeters for the measurement of current in dc circuits. External shunts are available with current rating from 1 amp. To 10,000 amp. & millivolt drops of 50mv, 60mv, 75mv, 200mv. Shunts are supplied with leads of standard resistance 0.025 ohms.
    ...more
  • DC Shunts

    DC Shunts

    Get Price Quote

    • Country of Origin50mV, 60mV, 75mV & 150mV
    • temperature range-10…+55 ºC
    • The RISH Shunts are available from 1A upto 3000A with an accuracy of 0.5% & 1%. Standard voltage drop is 50mV, 60mV, 75mV & 150mV. Intermediate current ratings, other voltage outputs, better accuracy and purpose built shunts can be supplied.
    ...more
  • Electrical Shunt

    Electrical Shunt

    Get Price Quote

    We offer high quality Electrical Shunt that provides dc Mv Signal, proportional to higher dc current to drive ammeter and control devices. Our Electrical Shunt are made from manganin material, available in all standard ranges with accuracy 0.5% and 1% and standard voltage drop 50/60/75mv.
    ...more
  • DC Shunt

    DC Shunt

    899 / unit

    • Brand NameNaveen Udyog
    • Available Voltage50mV, 60mV, 75mV and 150mV
    • UsageIndustrial
  • DC Shunt

    DC Shunt

    Get Price Quote

    • Materialbrass
    • Temperature (deg. Celsius)Calibration 20 C
    • Voltage (V)100mv
    • Current5A to 15000A
    • GradeDC
    • Working range20 C to 60 C
    ...more
  • DC Shunts

    DC Shunts

    Get Price Quote

    ‘EIC’ make D.C. Shunts is made of very high precisioin stable imported Manganin wire which is silver soldered to Gunmetal terminal blocks for zero – resistance contact. Temperature rise and Dimensions is within limit specified in IS 1248. Standard pair of leads, each one meter length, is supplied with each shunt. Shunt upto 30A can be supplied with Bakelite Mounting strip.
    ...more
  • DC Shunts

    DC Shunts

    150 - 5,000 / Piece

    • MOQ50 pieces
    • MaterialAluminum
    • ApplicationIndustrial, Meter For Industry And Home Use, Watt-Hour Meter
    • FinishingColor Coated
    • Frequency50 - 60Hz
    • Armature220V DC
    • FeaturesDurable, Reliable, Fine quality
    ...more
  • DC Shunt

    DC Shunt

    4,500 - 5,000 / Piece

    • Brand NameDigicod
    • FinishingColor Coated
    • Current TypeDC
    • ConditionNew
    • ApplicationIndustrial
    • Number Of FlowerDc Shunts
    • Digicod PROVIDE makeup high quality Standard grade chemical very good printer running machine and good performance  Best quality of Cij Printer ink, make-up and wash solution also gives you best sport of service. 
    ...more
    www
  • DC Shunts

    DC Shunts

    Get Price Quote

    We offer shunts. Shunts are precision parts commonly used for measuring current in KWH in Electronic meters. Precision shunts are also used in electric vehicles and other applications like invertors, etc.
  • DC Shunt

    DC Shunt

    Get Price Quote

    • Storage Temp20 to 70 degree Celsius
    • Current Rating1A to 15000A
    • Continuous Over Load20 % rated current
  • DC Shunt

    DC Shunt

    Get Price Quote

    Located in Delhi (India), we stand tall as the Manufacturer, Supplier and Exporter of DC Shunts in the global markets. It finds widespread industrial application where ever constant speed operation is required. Our adroit engineers precisely fabricate the DC Shunts employing top-notch material and technology. Acquire the DC Shunts from us in customized specifications at nominal prices. We are known for executing timely deliveries.Specifications : Material Available: Iron, Brass, Gun Metal 75mV is the general voltage drop Different voltage drops can also be designed as per request As per IS 1248 Accuracy Class 1 Customized shunt can also be designed as per drawing Range- 50Amps/75mV to 15000Amps/75mV
    ...more
  • DC Shunt

    DC Shunt

    220 / Piece

    • BrandAutomatic Electric LTD
    • Current5A to 15000A
    • Voltage75mV
    • Working range20-60 Degree C
    • GradeDC
    ...more
  • DC Shunt UPS

    DC Shunt UPS

    Get Price Quote

    • FeaturesLong lasting battery backup, Compact size, Heat resistance
  • DC Shunts

    DC Shunts

    Get Price Quote

    Shunts are manufactured by using high quality maganin wire which is the best material for shunts application with temperature coefficient of only 10 PPM. This gives high stability, cut to required dimension by special cutting machines. Shunts confirm to IS : 1248 (Part 8) 1984 Note :   1. Available accuracy class : 0.5, 1.0. 2. Required accuracy class should be specified while ordering. 3. When current taken by the associated measuring instruments is smaller than the rated current multiplied by the class index of the shunt and divided by 300, the current taken by the associated measuring instrument may be neglected. 4. All current connection must be connected whileusing the shunts to ensure the specifications.
    ...more
  • DC Shunts

    DC Shunts

    Get Price Quote

    DC Shunts, Dimmer Sta
  • DC Shunts

    DC Shunts

    Get Price Quote

    DC Shunts, Cell Tester, Constant Voltage Transformers, Potential Transforme
  • DC Shunt

    DC Shunt

    Get Price Quote

    DC Shunt, Auto Transformer, Current Transformer, DC Energy Mete
  • DC Shunts  34-DB

    DC Shunts 34-DB

    Get Price Quote

    DC Shunts 34-DB, Tap Change
  • DC Shunts

    DC Shunts

    Get Price Quote

    DC Shunts, 3.5 Digit LCD / LED Modules, MV / MA Source Universal Calibrato
  • DC Shunts

    DC Shunts

    Get Price Quote

    DC Shunts, Oxygenator, Heart Lung Machine, Patient Warmer
  • DC Shunts

    DC Shunts

    Get Price Quote

    DC Shunts, Mountable Rotary Switches, MCB Lockou
  • DC Shunts

    DC Shunts

    Get Price Quote

    DC Shunts, Wire Wound Resistors, Resistive Loads Rheostat
Filter by City
top