Metal Resistor Dealers (67 products available)

• Material: Metal
• Shape: Cylindrical
• Max. Overload Voltage: RCWV x 2.5
• Range: 1 Ohm To 2 Mega
• Insulating Resistance: 1000 M Ohm
• Wattage: 1w,2w,and 1/4w

• Condition: New
• Application: Electrical

All Resistance values available in 1W,1/2W,1/4W,2W and 5W. Also available in copper.

Metal Film Resistors of all specifications are available with us. They are accurately calibrated and thus in high demand. We obtain these resistors from well renowned factories that promise nothing less than the premium quality. Our rates are fairly nominal and affordable. We supply this product to many of our clients who hail from different parts of the nation. Our sales executives will handle all further doubts and clarifications.

• Usage: dynamic braking resistor

features low price small size.high power and excellent load life stabilityexcellent short time over loadstrongly resistant to moisture & solvent.self-extinguish material is used in encapsulation.non-inductive type available.high-surge-resistant items are available.wire terminals available. Standard length 300mm longer length upto 1.25 mtrs.(optional) can also be supplied.models with thermal switch available.custom built resistors is our speciality.   technical parameters 1. Operating temp. - -55°c - +275°c2. Insulation resistance - >20m min3. Dielectric strength - ac1500v, 3500v, 5000v for 1 min4. Temp. Coefficient - 50 ppm/°c, 100 ppm/°c, 260 ppm/°c5. Short time over load - 10 x wattage rating, 5 sec6. Moisture resistance - temp 40°c moisture 95% dc100v500h7. Thermal shock - wattage rating 30min. -25°c, 15min8. Vibration - 10c/c ~ 50 c/s ~ 10 c/s (1min) -2h each of paralleled and right angle.9. Load life - wattage rating 1.5 h on, 30min off, 1000h10. Derate to zero - at 275°cnote:if finned heatsink is used, surface area should be equal to the above heat sink area.

• Type: Electrical
• Power: 0.25W , 1%
• Condition: New
• Tolerance: 1000PCS
• Working Temperature Range: -55°C
• Usage: Dynamic braking resistor

Contact us to acquire Metal Film Resistors (Miniature) (OMM) at competitive prices. The Metal Film Resistors (Miniature) (OMM) are sturdy in construction and assure longer functional life. Rely on us! Highlights : A homogeneous film is sputtered deposited on 85 to 96% alumina ceramic rods and conditioned to achieve the desired temperature coefficient Nickel plated caps are firmly pressed on the metalized rods A special Laser machine is used to achieve the highly precise resistance tolerance by cutting a helical groove in the film layer Tin coated electrolytic copper wire are spot welded to the center of the termination caps The resistor is coated with special epoxy or flameproof epoxy for electrical, mechanical and climatic protection, color codes are applied with respect to designated value on coated resistor All Resistors are subjected to testing before final taping process   Features : Wide Range of Resistors Low TCR up to 5 ppm PC Low Tolerances up to ± 0.01% Pulse withstanding design available Flame proof coating available RoHS Compliant Custom Built Design and values available

Color coded Metal Film Axial style Miniature series available Power Range - 1/6W to 5W KMF series is a range of high stability, high reliability, and multi coated precision metal film resistors. This series of resistors features low noise and low temperature coefficient. A wide range of resistance values are available in this series of Resistors. These resistors are suitable for applications involving precision electronic circuits. Small sized metal film resistors, KMF(S), and super small sized metal film resistors, KMF(SS), are also available in this series.

• Type: Metal Film Resistor
• Material: Metal
• Application: Commercial, Residential Sectors
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 110V, 220V, 380V, 440V, 525V
• Condition: New, Old
• Power Type: AC, DC
• Frequency: 50Hz, 60Hz
• Power: 0-5Kw, 10-15Kw, 15-20Kw, 20-25Kw, 5-10Kw
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Phase: Double Phase, Single Phase, Three Phase
• Terminals: 3Terminals, 6Terminals

• Tolerance: 1%, 2% 5% And 10%
• Brand Name: CERMET
• Available Sizes: Miniature, Regular
• Power Range: 0.5 W to 5 W
• Resistance: 1.0 %
• Series: CSN & CMSN

metal resistor:Buy 2N3055 Transistor Metal Package. Consumer Electronics and Technology products. JujuBuy takes the full advantage of this nearby market to enrich their stock with newest, rarest and affordable Electronics Products.

• Power: 0.5W to 5W
• Series: CSN & CMSN
• Range: 0.1E to 1M
• Tolerance: 1% , 2% , 5% , 10%

We are counted amongst the well-reputed Precision Metal Film Resistor Exporters from India. The notable features like durability, resistance to temperature and stability of flow of current has made the Metal Film Resistor ideal for the electrical industry. Additionally, the below mentioned notable features have also played a vital role in the enhancement of the demand of Metal Oxide Film Resistor in the market. Advanced thin film technology. Excellent overall stability Very tight tolerance down to ±0.1% Extremely low TCR down to ±15 PPM/

• Tolerance (%): 5 %
• Power (W): 0.66W
• Temperature (deg. Celsius): -25 - 85 Degree Celsius
• Dielectric Strength: 700VDC
• nsulating Resistance: 1000 M Ohm
• Limiting Element Voltage: 350VDC

• Max Operating Temperature: 150 Degree C
• Resistance: 330 Ohm
• Dimensions: 6*1.7*12 mm
• Mounting type: Through Hole
• Temperature Co-efficient: +-50 ppm/ Degree C
• Tolerance: 1%
• Maximum Overload Voltage: 500 V
• Maximum Working Voltage: 250 V

IrDA Transeceiver Rectifiers Small Signal Diodes Zener & Suppressor Diodes Capacitors - Tantalum, Ceramic, Film Resistors Mosfets RF Transistors Opto Electronics IGBT Modules 10KV Surge WWR Power Factor (PFC) Capacitor TOSHIBA MOSFETIGBT OptocouplersA MEMORYSTORAGE devices LED Microcontrollers[32 Bit Cortex] M0,M3 & M4 Discrete Devices CMOS Sensors BluetoothWi-Fi NFC Automotive ASSP (Car Audio solution) LED Drivers Motor Drivers HDD [500MB[1TB2TB3TB4TB] POWERINTEGRATION ChiPhy™Family LYTSwitch™Family [LYT-0 LYT-2 LYT-4] LinkZero™-Family [Link Zero-LP & AX] Link Switch™-Family [Link-PHPLCVIILPTNXT]-HP111 Tiny Switch™-Family [Tiny-III & Tiny-4] Top Switch™-Family [TOP-GXHXJX] Hiper™ Family [Hiper-LCS PFS PFS-2 PLC TFS] CAPZero™ Family SENZero™ Family DPA-Switch™ Qspeed™-Family [H-Series Q-Series X-Series] ROHM EEPROMS Motor Drivers LED LCD Drivers & Sensor Ics LDO Analog Switches Logics Video and Imaging ICs & Audio ICs LED LED Display Laser Diode IrDa Optical Sensor Diode Transistors Tantalum Op.AMP Mosfet

• Type: Metal Film Resistor
• Material: Metal
• Certification: CE Certified, CQC Certified, IAF Certified, ISI Certified
• Application: Commercial, Residential Sectors
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 110V, 220V, 380V, 440V, 525V
• Condition: New, Old
• Power Type: AC, DC
• Frequency: 50Hz, 60Hz
• Power: 0-5Kw, 10-15Kw, 15-20Kw, 20-25Kw, 5-10Kw
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Phase: Double Phase, Single Phase, Three Phase
• Terminals: 3Terminals, 6Terminals

We are offering a wide range of Metal Oxide Resistors (MOR) - THAKOR.Specification: Wattage: 0.16 W to 2.0 W Ohmic Range: 0 E to 22 Meg Temp. Coefficient: 100 ppm Tolerance: 0.5%, 1% & 5% Temperature range of -55°C to 235°C Flame proof epoxy coating Colour band marking for easy identification. Additional Information: Minimum Order Quantity: 2500 Pieces

• Tolerance: +-1 % & +-5 %
• Usage/Application: Electronic
• Max. Current Rating: 2A
• Power Rating: 0.25W, 0.50W, 1W, 2W & 3W

Features Selected superior quality material. Automated mass scale production. Superior electrical performance. Flame proof epoxy coating. Color band marking for easy identification. Packed to customer requirement. Low prices, faster deliveries. RoHS complient part, lead free. Applications High voltage power supplies. Television sets. High frequency inverters, UPS etc. Measuring instruments. Capacitor discharge application.    

The WMF series Metal Film Resistors are manufactured using the latest Magnetron Vacuum Sputtering System. This ensures a very stable resistive medium having a very low temperature coefficient. The resistors are insulated with layers of light blue lacquer. The WMF series offer a wide range of power rating (0.125W, 0.25W, 0.40W, 0.50W, 1W, 2W & 3W), tolerances (0.1%, 0.5%, 1%, 2%, 5%) and TCRs (15, 25,50 & 100 ppmºC)

We offers top quality of Metal Oxide Film (MOR) that are fabricated by using latest tools and equipment at our vendors production unit. We provide this Metal Oxide Film at competitive market prices. This product is appreciated in the market for some of its features that are detailed below: Series: MO / MOS Power Rating: 0.5W to 3W Small in Size High reliability Flameproof Silicon Coating 200, 350 ppm/°C 10 Ohm ~ 1M Ohm

Metal film resistors have a thin metal layer as resistive element on a non-conducting body. They are amongst the most common types of axial resistors. Other film type resistors are carbon film and thick and thin film resistors. In most literature referrals to metal film, usually it is a cylindrical axial resistor. However, thin film chip resistors use the same manufacturing principle for the metal layer. The appearance of metal film resistors is similar to carbon film resistors, but their properties for stability, accuracy and reliability are considerably better.  

• Application: Electronic
• Power Rating: 0.125W, 0.25W, 0.40W, 0.50W, 1W, 2W & 3W
• TCRs: 15, 25,50 & 100 ppm/degC
• Latest Magnetron: Vacuum Sputtering System

CMGR Series, metal glaze elements on ceramic substrate with a tinned copper wire terminal and are coated with special epoxy coating very high ohmic value up to 200G ohms. Thick Film Resistors are extremely high stability, accuracy & reliability. Both Non Inductive Types & Un Lacquered Types are also available in the array. We are renowned as one of the prominent Metal Glaze Thick Film Resistors Manufacturers in India. The company also specializes in providing Polymer Thick-Film Resistors in varied specifications. CSK Series, Thick film metal oxide resistors having high resistance value in a small size, Low noise, and high heat dissipation. Thick Film Resistors are available up to 12W. Range : Metal Glaze Thick film ResistorsThick film Hybrid Resistors

The WMF series Metal Film Resistors are manufactured using the latest Magnetron Vacuum Sputtering System. This ensures a very stable resistive medium having a very low temperature coefficient. The resistors are insulated with layers of light blue lacquer.

• Feature: Comes with color-coding, Flame-proof property, Superior solder-ability
• Tolerance: +- 1%
• Power: 5-20 W
• Mounting Type: Through Hole
• Resistance Range: 8.2 - 15 ohm
• Structure: Fixed Capacitors

Series CMR & CMMR Range 0.16W to 2W, 0.1E to 10M Tolerance 0.05%, 0.1%, 1%, 5% Available Sizes Miniature, Regular Application Power Electronic Industry, Telecom Industry

• Material: Metal
• Voltage: 12 V
• Power: 2 W
• Tolerance: 5.00%
• Operating Temperature: 50 Degree C
• Length: 6 inch (L)

Metal Film Resistors, Account Management Services, carbon film resistors