Isolator Semaphore
1,250 Per Piece
1 Piece (MOQ)
Salaah Time Indicator
27,000 - 72,000 Per Piece
Best Deals from Electronic Indicators
Remote Status Indicator With Lamp
Get Price Quote
1 Piece (MOQ)
The lamps indicate “READY”, “MEASUREMENT IN PROGESS” AND “MEASUREMENT OVER” , using the relay outputs of the Model AUP-500. These indications are of great help to the operator, as they indicate whether the thermocouple is properly inserted into the lance before taking a reading and also whether the reading was completed without thermocouple burn out; in case the thermocouple becomes open before the sampling process is complete “Measurement Over” will not be indicated.
Heater Failure Indicator
950 Per piece
1 piece (MOQ)
Standard Time Indicator
600 Per piece
1 Piece (MOQ)
electrical indicators
Get Price Quote
Electronic Drum Level Indicator
200,000 Per Set
1 Set (MOQ)
Electronic Digital Indicators
Get Price Quote
A wide range of Electronic Digital Indicators that has LED and LCD display. Our range of Digital Indicator can be easily calibrated using a keypad. The decimal point and resolution is programmable in our range of products. Further, to ensure that the quality of our range of products is at par international standards; these are checked thoroughly at every stage of production.
Namaz Indicator
6,000 - 20,000 Per Pc
Clock, Calendar and 10 Namaz timings. Aluminum powder coated cabinet. 1.5" red high bright digits Remote control
Namaz time indicator
4,000 - 80,000 Per piece
1 Piece (MOQ)
www.bcimarket.com Highlights All salaah time will change automatically. Operations in Auto mode and Manual mode. Shafai/Hanfi preference. Buzzer on/off options. Indication and Beep for Salaah and Makrooh time. Shafai/Hanfi preference. All Salaah start and End time with its indication on display. * 14 Events (Fazr, Zuhr, Asr, Magrib,Tulu ,Ishraq,Chasht, Zawal, Tahazzud, Sahri, Iftar, Makrooh). All settings done using Wireless Remote.
Mega Watt Indicator
Get Price Quote
Various industries in energy sector have the need to keep a track of total MW generation and consumption. Ajinkya Electronic Systems offers a wide range of Mega watt indicators that serve this purpose efficiently.Available in various sizes and options these displaysoffer a one stop solution for displaying crucial information.
electric indicator
Get Price Quote
Electronic Display Flow Rate Indicator
Get Price Quote
FEATURES Analog and Pulse outputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Displays total and flow rate simultaneously. Large digit selection for flow rate or total Various accessories are available for this product. Applications The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C and +80°C (-40°F up to 176°F). Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.
BAUR Tracy - Partial Discharge Inductor
Get Price Quote
1 Piece(s) (MOQ)
Tracy BAUR partial discharge inductor Description:Simple and exact pin-pointing of partial discharge positions1. Portable, battery-operated signal coupling device2. Suitable for cables and cable accessories3. Inductive signal coupling4. Avoids costly, unnecessary replacements of PD-free cable accessories.The BAUR tracy partial discharge inductor is used for the exact location of partial discharge positions in cables and cable accessories (partial discharge pin-pointing).
Azan Namaz time indicator
7,999 - 9,999 Per piece
features: digital clock analog clock hijri date iswi date azan time azan time indicator jamat time jamat time indicator namaz name in english & urdu each namaz start time each namaz end time current namaz time with highlight next namaz start time next namaz azan time next namaz jamat time next namaz end time makruh time makruh time indicator subah sadiq time tulu aftab time zawal time gurub time sehri time iftar time daily aayat / hadith in arabic with translation (urdu, english, hinglish) add announcement in any language
Ltm Indicator
Get Price Quote
We offer superior quality LTM Indicator that finds application in various industries. Easy operation and high performance are synonym of our wide range of LTM Indicator. Available in any capacity, these machines can be used for tension and compression testing, and can be availed with various options such as manual or motorized operation, PC connectivity, PC based software with graphs, etc. Our user-friendly machine has a special option of in-built data logging and step control facility. Most importantly, all our machines are designed with three pillars and linear bearings and can be used for testing various components such as springs, rubber and plastic components, etc. Popular for : High efficiency User friendly operation Low maintenance cost Good battery backup Rugged construction Steady performance Technical Data : Full software calibration Flashing Displays when value crosses 90% of Full Scale Peak Force and Spring Rate displays (optional) Provision for set points for control in motorized applications Data collection of up to 10 steps at a time, with preset step width, with force or position as the base parameter Provision for RS232 output of the data, with option for selecting either continuous data transmission or transmission of collected data
JUMBO size Indicators & Controllers
Get Price Quote
Pantech's Programmable Microprocessor based Indicator cum Controller, model 803 is an ideal instrument for providing indication as well as controlling set points to various processes in JUMBO SIZE DISPLAYS. It is designed to accept various process inputs ( Current, Voltage, RTD, Thermocouples, Resistances ) simultaneously i.e in UNIVERSAL manner or any one of these in PREDEFINED manner. When UNIVERSAL manner, The user can configure from the front keys only to select any one of the input automatically. The user can also configure to set the range of linear inputs or calibrate the instrument without openint it. The model 803 can give maximum 4 relay outputs. All the contact output related specs like – SETPOINT, ALARM TYPE, HYSTERISIS – can be configured easily by the front panel keys itself. Retransmission facility is of course provided with all possible configurations allowed by front keys as usual. The instrument can be optionally equipped with serial communication facility to operate on MODBUS RTU protocols. Single level password is there to keep the settings and configurations intact for the right user only.
Electronic Digital Indicator
9,000 - 90,000 Per Piece
1 Piece (MOQ)
Located in Mumbai, Maharashtra, India, we are actively functioning as Manufacturer and Supplier of Electronic Digital Indicator all over the country. With due support of qualified veterans, we are indulged in offering top-notch quality Digital Indicator. It is manufactured with Industry Standard, rugged construction, efficient in working and highly durable. We make use of refined technologies so as to bring out the best Digital Indicator. Moreover, it is offered by us at Market Compititive prices.
Sound Indicator
Get Price Quote
We are a trusted Manufacturer and Supplier of Sound Indicator in India. All of us know it is impossible to separate sound effect and light effect. But this simple circuit makes it possible to vary the effect from simple to complex. This circuit is a sort of running light whose rate of change depends on the frequency and intensity of the sound.About the Circuit : The circuit is build around two counter ICs, IC1 and IC2 as shown in the circuit diagram. The sound signals generated are received by condenser microphone. These signals are amplified by pre-amplifier circuit designed around transistor T1. It should be noted that the amplified level must be high enough to overcome the switching threshold of the counter, while its frequency determines how often counter is clocked. After amplification, the signal is applied to IC1 via P1, which controls the sensitivity of the circuit. Since audio frequencies are too high for making a good visual effect, the signal frequency is scaled down by IC1 when S1 connects pin11 with pin15 of IC1, when the switch is in other position, pin2 is connected with pin15, the counter then divides by 1 and the effect assumes a completely different character that no longer resembles a running light. The actual running light is provided by IC2, a counter with integral 1 from 10 decoder, which is clocked by the Q0 output at pin3 of IC1 of the ten output of IC2 each of which is connected to an LED, there is always one ‘high’. The ten LED have a common bias resistor R5, an arrangement that is perfectly visible since only one LED lights at a time. The power supply must be able to provide a current up to 100mA/200mA. Frequency of sound indicated on LED display.
salaat time indicator
3,500 Per Piece
1 Piece(s) (MOQ)
We are offering salaat time indicator. Product features 1. all salaah time will change automatically with respect to date and time. 2. 1 inch display segment size. 3. operations in auto mode and manual mode. 4. shafaihanfi preference. 5. buzzer onoff options. 6. indication and beep for salaah and makrooh time. 7. count down before one minute jamat time. 8. all salaah start and end time with its indication on display. 9. sahar and iftaar time on display. 10. alarm setting. 11. day and date display. 12. battery backup (optional on request). 13. working on 12v dc, 1 amp supply voltage. 14. all settings done using tv remote.
Crankshaft Deflection Indicators
Get Price Quote
Detects distortion of crankshafts Extremely high accuracy. Used by a large number of engineers in more than 90 countries. The instrument used for measuring the bearing wear and vevaxlars warping both on ships and at power plants. Prisma DI-5C provides the ability to transfer the measurements to a computer for further processing. Reliable and simple to use Smooth assembly Great flexibility Large span Easy to reset Backlight function Turns itself off after 45 minutes of inactivity Battery indicator Store up to 45 measurements internally. Transfer to PC (Windows) Export to Excel Reliable and simple to use Smooth assembly Great flexibility Large span Easy to reset Backlight function Turns itself off after 45 minutes of inactivity Battery indicator
electronic indicator
Get Price Quote
SIC INTELLIGENT INDICATOR
Get Price Quote
Sansui Electronic Weighbridge Terminal is specially designed to withstand all environmental conditions prevailing in the weigh-cabin. The unit can operate easily at temp. upto 60 degree. Thus no air-conditioning is required for weigh cabin. The SIC Indicator is interfaced with an IBM Keyboard for data entry which is standard and available any where. Hence has advantage over feather touch type of key/keyboards, which are custom built and have very short life. Thus, the keyboard used in Sansui weighbridge is user friendly. The terminal is equipped enough to provide detailed print ticket without using a PC (however, it is also PC compatible). The whole set is compact enough to be placed on a 3x2 ft. table Easy to Install & No Calibration / Corner Correction Required at site Digital O/P which sends weight directly in step
Electronic Weighbridge Indicator
24,500 Per Piece
1 Piece (MOQ)
ELECTRONIC DISPLAYS/ FLOW-RATE INDICATORS
Get Price Quote
Toshniwal offers a very wide range of flow rate indicators / totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. The Robust IP66, IP67 (NEMA Type4X) field enclosure is extremely rugged. The indicators are available with intrinsically Safe ATEX and IECEx approvals for gas and dust applications. The sensible menu driven structure ensures that programming can be done by your own crew saving cost and irritation. Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors. FEATURES Analog and Pulse outputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Displays total and flow rate simultaneously. Large digit selection for flow rate or total LED backlight. Ambient temperature: -40°C to +80°C (-40°F to 176°F). Various accessories are available for this product. Applications The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C and +80°C (-40°F up to 176°F). Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.
electronic indicators
Get Price Quote
We deals in supplying of wide range of electronic Indicators.
Electronic Digital Test Indicator
Get Price Quote
Namaz Time Indicator Reolite
Get Price Quote
We are offering namaz time indicator reolite. Azan also comes with a qibla indicator or a compass. A quibla is the direction of the kaaba, the sacred building at mecca to which muslims turn during their prayer times. Azan clearly indicates this direction and sets you free from the direction dilemma. All in all a perfect portable app unlike your alarm clock that has to be carried along with you all the time. Know your prayer timings in between any busy schedule and feel the sacred contentment.
electronic temperature indicator
Get Price Quote
The family of indicators accepts a variety of RTD and Thermocouple sensor inputs and come in various DIN standardsize to suit the user requirements the low power requirements of the unit, wide operating voltage and extremely low cost make them ideal for a no. of applications. In additions, Dual Indicators which have two independant sensor inputs and individual display are also avaliable in a compact 96 x 96 x 110 housing.
Electronic Drum Level Indicator
Get Price Quote