Acid Filtration Unit
25,000 Per Set
01 Set(s) (MOQ)
Mechanical Belt Filter Press Unit
Get Price Quote
1 Piece (MOQ)
Belt filter press It is intended for mechanical dewatering of wastewater sludge, water conditioning sludge, and industrial slimes. It features a rollers system installed on the frame, between which two endless belts are stretched and connected into continuous ducts. Two belt flushing assemblies, sludge feeder and distributor, and filter cake removal devices are provided with the filter press. Belt thickener It is intended for mechanical dewatering, conditioning, and purifying wastewater sludge and industrial slime. It features a strained, endless sieve belt with an installed ripper system. After dewatering in belt thickener, the sludge moisture can be reduced from 98-99% to 90-96% It is optimal for wastewater with pH 6.0 – 9.0. Belt filter press combi units In this system, the belt thickener is installed onto the frame of the belt filter press. It features the belt filter press PL series and belt thickener SG mounted on it. The dewatered sludge in the belt filter press is treated with a polymer; however, in belt filter press combi units, after polymer treatment, sludge is fed into the top of the unit, on belt thickener. Here, preliminary sludge dewatering is done under gravity. Finally, the sludge is supplied to filter press gravity dewatering zone. The dewatering capacity can be increased with the belt filter press combi units. Advantages Compact equipment. Best suitable for sludge with initial moisture of more than 97.5%. It lengthens the gravity dewatering zone. Low polymer consumption. High corrosion resistance. Cost-efficient. It is reliable because of the high-quality components in the equipment. High efficiency of sludge thickening due to a special system of rippers. Automated control system Certified spare parts and accessories
Best Deals from Filter Units
Pre Filters Ductable Unit
650 Per Piece
12 Piece(s) (MOQ)
Fan Filter Unit
Get Price Quote
We are the leading Manufacturers, Suppliers and Exporters of Fan Filter Units. As the needs or uses change in a facility our Fan Filter Units (FFU) can exchanged with lay- in rights or blank panels. For facilities with lower classification, upgrades can be obtained by simply adding additional FFU�S. Our Fan Filter Units are fully salvageable as stand alone units. Features Easy to install Superior Quality Economical Highly Effective Filter Fan Units made by Nicotra Gebhardt are available as standard or customised versions for standard and customised ceiling grids for different filter and grid sizes as top load or bottom load versions for liquid or gasket seal systems for various air flows and pressure drops with minimal vibration and audible noise emissions with an external rotor motor system speed variation via BUS or supply voltage for various control systems HEPA Filter A sealed, separatorless mini-pleat filter wih anodized aluminum cell sides, minimum DOP efficiency of 99.99% @ 0.3 microns. Electrical Standard connection to terminal strip in external junction box.
Aeromech fan filter unit
Get Price Quote
1 No (MOQ)
Exhaust Fan Filter Unit
Get Price Quote
We are the right place for you, if seeking for the Exhaust Fan Filter Units of the superlative quality with the rational price tags. Our name figures amid the top entities engaged in the manufacturing and supplying of the Exhaust Fan Filter Unit in India. Our deft team puts painstaking efforts to construct the Exhaust Fan Filter Units that are flawless in construction & performance. Highlights Our Exhaust Fan Filter units are designed to remove micro contaminants generated inside a clean room. This reverse flow fan filter units are ideal for rooms where powders, aerosols, or fine dust is generated. The Ext HEPA Filter safely removes micro-contaminants down to 0.3 microns from the air exhausted from the clean Room. The perfect way to contain a potential environmental contaminant
Fan Filter Unit
68,000 Per Piece
1 Piece (MOQ)
Fan Filter Units direct a vertical laminar flow of filtered air downward through the enclosed cleanroom area. Each includes a 1100 CFM impeller blower (rated at 90 FPM with filter load) mounted in an MS housing with a plenum design that ensures ample air velocity across the entire face of the filter. A HEPA (high efficiency particulate air) filter installed inside the housing is rated 99.99% efficient at 0.3um particles. The filtration medium consists of micro porous polyurethane mini-pleats held in place by strong, rigid plastic separators that keep the medium from nesting. This design channels airflow with optimal efficiency to reduce resistance. The filter is sealed into the sturdy powder-coated steel frame with a fire-retardant, non-outgassing adhesive. Power to the Fan Filter Units is controlled by a master ON/OFF switch located on the cleanroom control panel. All 120VAC units and 220VAC, 60Hz units are UL listed. CE-marked models are available for 220VAC, 50Hz operations.
Fan Filter Unit
Get Price Quote
We have parted our infrastructure into several units and one of them is warehouse wherein we keep a huge stock for furnishing urgent and quick requirements of the clients. Our organization has observed impressive rise as Fan Filter Unit supplier, courtesy our ability to fulfill to wholesale demands without hassle.
Fan Filter Unit
25,000 - 250,000 Per unit
Fan Filter Unit
Get Price Quote
FR Filter Unit
Get Price Quote
Being a quality-conscious firm, we ensure that the offered products comply with the laid industry standards and are of supreme quality. We keep an eye on every aspect and packaging of products is one of them. Staffed with professional packaging employees having experience in this domain; they use premium packing material to ensure zero damage during transportation. Features : Best quality Flawless filtration Cost effective
Exhaust Fan Filter Unit
Get Price Quote
We are the right place for you, if seeking for the Exhaust Fan Filter Units of the superlative quality with the rational price tags. Our name figures amid the top entities engaged in the manufacturing and supplying of the Exhaust Fan Filter Unit in India. Our deft team puts painstaking efforts to construct the Exhaust Fan Filter Units that are flawless in construction & performance. Highlights Our Exhaust Fan Filter units are designed to remove micro contaminants generated inside a clean room. This reverse flow fan filter units are ideal for rooms where powders, aerosols, or fine dust is generated. The Ext HEPA Filter safely removes micro-contaminants down to 0.3 microns from the air exhausted from the clean Room. The perfect way to contain a potential environmental contaminant
Fan Filter Unit
Get Price Quote
Galvanized steel (standard) (default), Type 304 #4 finish stainless steel, Type 316 #2b finish stainless steel, Powder Coated Painted Cold Rolled Steel (Clean Air Products standard white), Powder Coated Painted Cold Rolled Steel (Customer-specified color), Internal direct drive blowermotor assembly isolated from exterior housing, Standard units ship with aluminum framed HEPA filter and fiberglass prefilter.
Fan Filter Unit
Get Price Quote
Cleanliness Class ISO-5 (Class -100) Light weight, Minimum power consumption, ceiling suspended LaminarAir Flow.Feathers : MOC -Aluminum Sound level — Less than 65 db Airflow adjustment regulator. l\/linipleat HEPA Filter Pre Filter
Pre Filters Ductable Unit
Get Price Quote
Pre Filters Ductable Unit Pre Filters Ductable Unit are manufactured from high density polyethylene mesh which has excellent washable properties as compared to other filter media. Since this filter encounters maximum dust loading, such washable property ensures longer service life of the filter. These filters can be offered in non woven synthetic media and can be supplied either in flange type or box (cassette) type construction. The filter can be supplied in MS, Aluminium or Stainless Steel frames. Applications: Heating, Ventilation & Air Conditioning Thermal power plants Nuclear power plants, research organizations & nuclear installations Pharmaceutical industry Clean rooms Computer installations IC manufacture Aerospace applications Usual sizes available are: Pre filters10microns Prefilters20microns No Size inches Flow(cfm) Size in inches Flow(cfm) 1 24 x 24 x 2 1000 24 x 24 x 12 500 2 24 x 24 x 4 2000 24 x 24 x 2 2000 3 20 x 20 x 6 1600 24 x 20 x 2 1600 4 24 x 24 x 6 2300 20 x 20 x 2 1400
Automatic Reverse Pulse- Jet Bag Filter Unit
Get Price Quote
Dirty gas enters from the bottom of the bag filter unit and flows upwards through the filter bags. The metal cage prevents collapse of the bag. Dust particles filtered and settled at the outer peripheral of the filter tube. Bags are cleaned by a reverse jet of compressed air, injected through nozzle just above the bag holding plate nearer to filter bags. A venturi nozzle provided at the filter bag opening accelerates the compressed air. Since the duration of compressed air jet short time, the filter tube become balloon for short time. This expansion of filter bag for short time of remove the dust cake formation and the dislodged dust falls into a storage hopper below. Reverse-pulse-jet dust collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower. This cleaning mechanism works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe. Automatic Reverse Pulse Jet Bag filter unit, generally have the following parts: Non woven filter fabric bags or high efficiency filter cartridges Strong raw gas chamber in steel Clean air/gas chamber mounted immediately on top of raw gas chamber. Air Jet manifolds is connected to a compressed air tank and solenoid valve assemblies complete with solenoid valves and electronic sequential timers. Inspection cover/doors, hand rails and cat ladder. Special features of the Pulse Jet Bag Filter Easy accessibility to all the components. Inspection and maintenance of filter bags can be carried out entirely from the clean airside. Space saving due to high air to cloth ratio. High filtration efficiency limiting emission level. Low compressed air consumption combined with high cleaning efficiency. High reliability of service since only a few components of simple design are involved. Maintenance free operation. Recovery of particulate matter from exhaust gas is vital for any industry from three aspect To ensure the operators health and safety by removing the hazardous fumes from the working area. To avoid pollution problems. Sturdy construction. To increase the product quality removing fumes from the process. Dust collection systems is used in many processes to either recover valuable granular solid or powder from process streams, or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere. Dust collection is an online process for collecting any process-generated dust from the source point on a continuous basis. Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality. The dust generation in manufacturing process directly effects the operator’s health, can contaminate the product which is being manufacturing can make highly uncomfortable for the people in & around the dust generating areas. wish to offer a solution by incorporating dust control & extraction system & ensure a safe & pure zone for the occupants. This process involves exhaust blowers, exhaust air duct work and dust collection hoods to pick up dust particles at the point of generation. In several cases, the dust collected by the system from the point of generation is routed through a filter unit which collects the dust & pure air will be exhausted to the ambient to meet pollution control.
PP FILTER UNIT
26,500 - 40,000 Per Set
Pre Filters Ductable Unit
650 Per Piece
Pre filters are manufactured from high density polyethylene mesh which has excellent washable properties as compared to other filter media. Since this filter encounters maximum dust loading, such washable property ensures longer service life of the filter. These filters can be offered in non woven synthetic media and can be supplied either in flange type or box (cassette) type construction. The filter can be supplied in ms, aluminium or stainless steel frames. applications: heating, ventilation & air conditioning thermal power plants nuclear power plants, research organizations & nuclear installations pharmaceutical industry clean rooms computer installations ic manufacture aerospace applications other details: these filters are widely used in fresh air supply , ahu systems.central ac units, fan coil units etc. With synthetic non woven media hdpe they are designed to give an efficiency of 90% down to 10 to 20 microns,similar to micro fine, they are also made as box types or flange types. Usual sizes available are specifications: pre filters 10 microns pre filters 20 microns no size inches flow (cfm) no size in inches flow (cfm) 1. 24 x 24 x 2 1000 1. 24 x 24 x 12 500 2. 24 x 24 x 4 2000 2. 24 x 24 x 2 2000 3. 20 x 20 x 6 1600 3. 24 x 20 x 2 1600 4. 24 x 24 x 6 2300 4. 20 x 20 x 2 1400 other sizes can also be made on request.
bag house filter unit
Get Price Quote
We have developed a state of the art free air flow type bag house filter unit especially for asphalt application with specially treated meta aramid filter elements. This zero maintenance design keeps emissions at less than 50 mg/Nm3, which meets international pollution control norms. This environment friendly unit has low operation cost & long life.
Fan Filter Unit
Get Price Quote
Fan Filter Unit
19,500 - 20,000 Per piece
1 Nos (MOQ)
filtration unit
Get Price Quote
Supported by an advanced transit system, we have become capable of delivering the orders within promised time. All those who are looking for a reliable name offering Filtration Unit can get in touch with us!
Retrofit Filter Unit
Get Price Quote
This filter is complete in all respect. It has skimmer at both side & delivery water from front. It save 100% water, reduce 70% chemical consumption and 50% electricity in comparison of conventional filtration systems. This unit hang on wall of less than 300 mm at any one wall of swimming pool. No balancing tanks, no filter room , no skimmers and no plumbing system need. Filtration capacity 20000 liters/hr. (Domestic swimming pools) 15000 Liters/hr.(Public swimming pools)
Mini Filter Unit
Get Price Quote
Mini Filter Unit is used for filtering the plating solution in order to get good quality plating. It finds extensive usage in precious metal plating such as cadmium, silver etc. We are one of the eminent Manufacturers, Suppliers and Exporters of Mini Filter Unit from Maharashtra, India. The Mini Filter Unit that we offer is fitted with a filter stack having filter pad, filter cloth and filter paper. We make available Mini Filter Unit in varied capacities.
filtration unit
Get Price Quote
We offer a wide variety of membrane filter support glassware for most scientific applications that require vacuum filtration.1. Choose the appropriate support glassware that fits the diameter of the filter membrane you are using (25, 47 or 90mm).2. Choose the appropriate connection for the flask or bottle you will collect the filtrate in.The following information will help you select the most appropriate glassware for your specific application. FILTER SIZE 25mm Support glassware is designed for filtering small volumes of liquids in particulate or biological contamination studies.47mm Support Glassware is recommended when analyzing up to 500 ml. of liquids for particulate or biological contamination, water/waste water analysis (reference: standards methods for the examination of water and waste water, 18th Edition, 1992), sterility testing of pharmaceuticals by the bacteria retentive filter method (reference: U.S. Pharmacopeia XXIII), and for preparing particulate free or sterile filtrates.90mm Support glassware is recommended for filtering large sample volumes, liquids with a heavy particulate load and viscous liquids when a high flow rate is required. The larger filter area can provide filtration rates up to four times faster than 47 mm assemblies. SUPPORT STYLE Fritted Glass Supports. Filtration assemblies with fritted glass supports are recommended for general membrane filtration analysis of samples for microbiological or particulate contamination. This support style is recommended when using gridded filters because the glass frit provides the most even distribution of the sample through the filter membrane. All of the fritted glass support bases have a coarse (40-60μm) porosity. CONNECTION TO FLASK/BOTTLE Silicone Stopper Connections. Silicone or neoprene stoppers are the most common connector from the filtration assembly to a Erlenmeyer style flask and are recommended for most routine filtration studies of aqueous solutions. Stoppers are not recommended when filtering organic or most corrosive solutions or when preparing HPLC mobile phase.Ts 40/35 Glass Joint Connections. Filtration assemblies with Ts 40/38 outer joint connections are recommended when filtering corrosive solutions and organic solvents. This connection style is also recommended when preparing HPLC mobile phase, since the “all-glass” connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers.47 mm All Glass Filtration Assemblies with GL45 Thread Connection Designed to collect the filtrate directly into a media-type bottle.
filter unit
Get Price Quote
- A pressure filtration unit with disk type filter pack - Trolley mounted - Monoblock centrifugal pump fitted with high impact impeller and lined with pp, rubber or ebonite rubber for resistance to acidic & alkaline solutions - Suitable for acidic and alkaline solutions having temperature up to 70oC, with the exception of chrome
3M Jupiter Air Filter Unit
27,000 Per Piece
Elctroplating Cimecal filter
32,000 Per Set
Buyers across Mumbai(India) and other markets can contact us for purchasing our product all year round. Utilizing the best-grade wrapping supplies, we pack our products securely to endure shipping and tag it correctly to offer product details such as the address of manufacturer/ distributors, MRP, quantity etc. Our Turbine Blower has a glossy surface with polished edges and is available in different dimensions Filters
Fan Filter Unit
Get Price Quote
Features : Pharmaceuticals and chemical research laboratories. Excellent cost / performance ratio. Wide variety of sizes and configurations to satisfy nearly any requirement Minipleat HEPA filters of efficiency 99.999% for supply. Close pleated pre-filters for suction 95% for suction. Can be modularly supplemented. User-friendly handling. Magnehelic gauge for pressure differential. Fluorescent light. UV light along with hour meter. Acrylic/ Polycarbonate side panels. Fine finish Minimal maintenance Hassle free operation Applications : Assembly and cleaning tasks in industry and research, Laboratories, universities, pathology departments, authorities. Pharmaceuticals and chemical research laboratories University clinics Electronic industry Optical industry Semiconductor production System engineering Aerospace Nuclear industry Food processing industry.
