Filter Units Dealers

The 99XX-05 Models are the smallest Disposable Filter Units with 11.7 ml internal volume. These models are used in low flow gas or liquid sampling applications, such as liquids to specific-ion analyzers or gases to personal samplers. The Model 4433-05 has 1/4" and 3/8" barb connections molded into the inlet/outlet ports. The 9900-05 is available with a color indicator that turns red when saturated with oil.   Models 9922-11 and 9933-11 Models 9922-11 and 9933-11 are used for application s similar to the smaller DFUs (Models 9922-05 and 9933-05) which require greater solids holding capacity and can tolerate the increased retention time.   Model 8833-11 These Disposable Filter Units are used as continuou s coalescing filters with a third port serving as the drain, slip-stream, or by-pass port.

These are highly efficient and robust Filter Units, suitable for most general plating solution with the exception of CHROME. The Unit consists normally of a Motor driven polypropylene pump with a mechanical seal or a Magnetic Drive Sealless pump, connected to a Filter chamber made of Polypropylene or M.S. lined with PPGL and containing a Filter Stack. The Filter Stack comprises a S.S. 316 or P.P. central pipe, a set of P.P. Filter Discs with Filter Cloth and Filter paper. The Filter Stack is easily removable from the chamber and needs to be cleaned regularly. A pressure gauge is provided, which indicates when the stack requires cleaning. The whole unit (excepting mini unit) is mounted on a trolley for easy movement. The unit is suitable for acid and alkaline solutions having temperature upto 70 degree centigrade. Activated carbon or Filter aids can be used in these Filter Units. The filter unit is provided with Suction and Delivery hoses.

The Sentinel range of filter units has been specially developed for the filtration of electroplating solutions and the range of capacities available will meet the majority of automatic and manual plating installation requirements. Sentinel filter units are totally enclosed, provide a large filtration area, are easy to clean and maintain, and provide effective retention of activated carbon or filter aids. The filters are designed to take plate packs and the standard units incorporate a rubber lined centrifugal pump. Applications: Sentinel filters may be used on the majority of electroplating solutions including: NICKEL - bright, semi-bright, dull ZINC - cyanide, alkaline, acid, neutral TIN - acid, stannate COPPER - cyanide, pyrophosphate CADMIUM - cyanide, acid, neutral. For the following solutions sentinel filters fitted with special pumps can be supplied: flourborate and fluoride based solutions acid copper acid tin (including bright solution.) solutions containing free hydrochloric acid e.g. nickel chloride strike solutions. Sentinel filters are not suitable for the filtration of chromium plating solutions. Filtration of anodising solutions: For sulphuric acid anodising solutions standard Sentinel filter units are advised.Sentinel fiter units are supplied in three sizes having one, two and three filter containers respectively. The filter contains are made of steel with a special quality high temperature cured rubber lining and are mounted on a sturdy tubular steel cradle. On standard units the motor-driven pump is mounted within the cradle, below the filter container. The single and double container units are fitted with castors for ease of movement, the three-container unit is provided with mountings for foundation bolts. Filter Pack: Sentinel filter are supplied with a plate type pack as described on the reverse. Packs can easily be removed from the container for cleaning of replacement without the use of a hoist, and to simplify this operation valves are fitted to the individual containers in case of larger filter units to enable them to be drained of solution. Centrifugal Pump: The Standard Sentinel filter units incorporate close coupled centrifugal pumps designed for filtration duties. A non-metallic/stainless steel impeller housed in a rubber lined cast iron body is used with an immersed type. Mechanical seal. Alternatively magnetically coupled, seals monoblock pumps can also be supplied. The filter units are supplied complete with a suitable motor, mounted on the tubular frame. A valve is fitted to the pump inlet to permit the unit be isolated. Pipework: Sentinel filters are provided with flanged inlets and outlets, permitting when required, direct connection to rigid plastic or rubber lined steel pipework. The units are supplies complete with two 3 metre (10ft.) lengths of reinforced acid resistant polypropylene hose including appropriate spigots. Sentinel filter units can be supplied as part of comprehensice solution handling facilities incorporating features such as: Transfer of solution from plating tank to storage. Solution circulation for heat exchangers and low current density plating out-units. Chemical make-up tanks. Plating solution purification treatments.

- A pressure filtration unit with disk type filter pack - Trolley mounted - Monoblock centrifugal pump fitted with high impact impeller and lined with pp, rubber or ebonite rubber for resistance to acidic & alkaline solutions - Suitable for acidic and alkaline solutions having temperature up to 70oC, with the exception of chrome

has a vide range of Filter Driers for Transport Air-conditioning and Refrigeration application. These driers has a exceptional performance features for these special needs.

Pressure Filtration is required in bright plating solutions to ensure brilliancy as well as smoothness of deposit. The solution is fed through suitable filtration media to ensure quality filtration. Cartridge type filtration unit's sealers magnetic drive powered by AC Knobs or PP, PVC, Non Metallic Corrosion proof maintenance free filter chamber with cartridge or pad type filter element and standard fittings. Different combinations of Cartridge size & Qtys can be offered with suitable Pump capacity based on Customers requirement and it may be not chemically compatible for certain applications in PCB process industries, for such we manufacture polypropylene filter housing suitable for cartridge filter & plate filter.    

  Cartridge type filtration units comprising of seal type PP chemical pump or sealless magnetic drive powered by AC motor of PVC, PP or CPVC non metallic corrosion proof maintenance free filter chamber (also in S.S.) with cartridge type filter elements and standard fittings.

Mini Filter Unit is used for filtering the plating solution in order to get good quality plating. It finds extensive usage in precious metal plating such as cadmium, silver etc. We are one of the eminent Manufacturers, Suppliers and Exporters of Mini Filter Unit from Maharashtra, India. The Mini Filter Unit that we offer is fitted with a filter stack having filter pad, filter cloth and filter paper. We make available Mini Filter Unit in varied capacities.

Buyers across Mumbai(India) and other markets can contact us for purchasing our product all year round. Utilizing the best-grade wrapping supplies, we pack our products securely to endure shipping and tag it correctly to offer product details such as the address of manufacturer/ distributors, MRP, quantity etc. Our Turbine Blower has a glossy surface with polished edges and is available in different dimensions Filters

Water System, Clean Room Equipmen

Double Chamber Filter Unit, Industrial Plating, Single Chamber Filte

Filter Units, Air Filters, Suction Strainers, Bronze Filter

Filter Unit, Electro Planting Equipments, Fully Immersed Barre

Bag Filter Unit, Air Circulators, Scrubber, Roof Extractor

Clean Room Doors, Quick Change Terminal Bo

Chemical Filter Unit, Water Treatment Plants, Barrel

Filter Units, Air Drier, SHAVO Products, Pneumatic Conveying Syste

Electroplating Chemical Filter Unit, PP Centrifugal Monoblock Pump

1 / 2'' Air Filter Regulator Lubricator Unit, Hydraulic Long Floor Jac