Fingerless Corrugation Machine Dealers (37 products available)

• Application: Industrial
• Condition: New
• Warranty: 2 Years
• Material: Metal

Advantages : Automation - It provides complete automation for the corrugation operator with all in one control panel. Speed - this machine is high speed runs 40-50 mtr /minute with electric heat system. Flute Rollers - 45 & 48 Crmo Chromed Alloy Steel rollers for High speed and better productivity. Glue Setting - Anilox Technology glue roller used in machine for the perfect application of uniform glue across the liner. Pressure Settings - Pneumatic pressure setting for Flute Roller, Pressure Rollers & glue roller. User friendly - Very easy to operate and use with zero maintenance.

• Condition: New
• Production Capacity: High
• Warranty: 1 Year
• Design Speed: 120m / min
• Effective Width: 1200 mm – 2400 mm
• Machine Type: Fingerless

FEATURES Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. Adopt gimbals transmission. Separate power. Corrugated roller, pressure roller and glue roller by pneumatic adjustment. Cardboard transmit adopt vacuum suction method, with wind control system. Keep flute profiles stable of the lower roller in the condition of running up. Bearing of corrugated and pressure roller adopt high temperature lubricate grease. Glue parts auto supply glue circularly. The Upper Lower corrugating rollers are made of 52crMo high quality alloy steel, after heat treatment. The hardness HRC58-60, the surface is grinded. The glue part surface are treated by special mash snicked and chrome plated. Motorized or manual glue width dividing to match the paper width. Glue part can be running independently or none independently while stopped.

• Condition: New
• Warranty: 1 year
• Type: Automatic
• 320S Design Speed: 120m/min
• 360S Design Speed: 150m/min
• Effective width: 1400mm-2500mm
• Corrugated roller: f320(f360)mm
• Features: Resistance against rust, Quality tested, Longer working life
• Power Source: Electric
• Usage: Industrial

Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. Adopt gimbal transmission. separate power. Corrugated roller, pressure roller and glue roller by pneumatic adjustment. Cardboard transmit adopt vacuum suction method, with wind control system. Keep flute profiles stable of the lower roller in the condition of running up. Bearing of corrugated and pressure roller adopt high temperature lubricate grease. Glue parts auto supply glue circularly. The Upper Lower corrugating roller are made of 52crMo high quality alloy steel, after heat treatment. The hardness HRC58-60, The surface be grinded. The glue part surface are treated by special mash snicked and chromeplated. Motorized or manual glue width dividing to match the paper width. Glue part can be running independently or non independently while stopped.

• ANY: 1200000

This is exclusively new type paper corrugating machine of the new millennium. It control upper fluting and pressure roll to give a perfect flute. The machine design to run on Electric/Steam/thermic fluid heating and as also been equipped with central lubricating system.     

We have come up with the highly demanded fingerless paper corrugation machines. Our fingerless paper corrugation machines are extremely efficient and demand low maintenance. We manufacture our fingerless paper corrugation machines with the use of best quality components to ensure durability and high performance. Our fingerless paper corrugation machines can be obtained at affordable prices. specifications design speed 120mt/mincorrugated roller made of ni-cr-mo-alloy steel with heat treatment (hardness 55-58 hrc)roller surface plated with chrome treatmentlower flute roll dia 320mm diaindividual gear bo- drive separating dynamic oscillating improves running stabilitythe glue application unit can be engaged and disengaged with the corrugation roll under the parallel movement of pneumatic cylindervacuum suction fingerless design provides prefect flute formation driven by heavy duty bloweradjustment of upper corrugated roll and pressure roll and glue roll controlled by pneumatic systemglue roll is duly engraved and glue dam is provided for accurate transfer of glue to the flute roll while formation of 2-plywith dam system for control of gum transfer width wisewith preheating and pre conditioning rollercirculating glue supplying system is available with the tank pump & motoravailable width 1400mm – 2500mm

The Fingerless Type Single Facer Machine range has an exceptional design that makes it strong and durable.We offer high quality Fingerless Single Facer Machine widely used for the manufacturing of 2 Ply Paper Corrugated Board. It ensures a smooth production of quality board.   Design Speed : 80m / min Effective width : 1400mm - 2200mm Corrugated roller : 280mm Dia Drive reducer box with oil immersed type lubricating to reduce noise keep running stable adopt transmission separate power. Corrugating roller pressure roller and glue roller by pneumatic adjustment. Bearing of corrugated and pressure roller adopt high temperature lubricate grease. Glue parts auto supply glue circularly. The upper-lower corrugating roller are made of 52CrMo high quality alloy steel after heat-treatment. The hardness HRC58°-60° the surface be grinded. The glue part surface are treated by special mesh and chrome plated. Motorized or manual glue width dividing to match the paper width. Glue part can be running independently or non-independently while stopped Adopt main motor frequency conversion control. (Optional)

• Country of Origin: INDIA
• Type: CORRUGATED BOX
• Warranty: 1 Year
• Operating Mode: Semi Automatic
• Shape: Rectangular
• Voltage: 440V
• Condition: New
• Driven Type: Electric
• Phase: Three Phase
• Weight G M Square: 2000-3000kg
• Packaging Type: Carton Box
• Capacity: 50-100kg/h
• Power: 1-3kw,3-6kw
• Brand: KRISHNA
• Size: 42

• Certification: CE Certified
• Voltage: 220V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Usage: Industrial
• Weight: 100-1000kg
• Automatic Grade: Automatic

Features : Chain Feeding Rotary Die Cutting Machine Whole machine adopts chain feeding system Roll adopts high quality steel, balance & hard chrome plated

We are counted among the reputed Manufacturers, Suppliers and Exporters of Fingerless Single Facer Corrugation Machine. It comes with operational speed of 80 m/min and can handle effective width of 1400 mm to 2200 mm. Bulk orders of the machine are processed by us as per the specific requirements of the buyers. One can obtain it at nominal rates.Details : Further, the system supports drive reducer box with oil immersed type lubrication support that supports noise reduction as well as in maintaining stable performance Some of its features include coming with pneumatic adjustment support, support of vacuum suction method, stable flute profiles stable of lower-roller while running up, use of high temperature lubricate grease on bearing of corrugated and pressure roller, flute rollers made of 48 Cr Mo alloy steel Available in sizes of -52”,62”,72”   Specifications : Electrical heating B,C,E,F,A flute, Shape: UV shape Electrical glue block off adjustment Glue making tank with mixer+ Return Glue Tank Corrugating roller diameter= 305 mm Pressure roller diameter= 395 mm Preheater diameter= 420 mm Glue roller diameter= 280 mm Blower motor power= 7.5 kw Main motor power= 7.5kw Flute rollers made of 48Cr Mo alloy steel of good quality.

• speed: 125rft/min.
• Steam Req. Kg./Hr.: 200
• Wt Approx. (MT.): 5.0

High Speed Bearing Mounted Fingerless Corrugation Machine high production with quality, this machine adopts fingerless technology. In this type of corrugation machine, air suction through compressor is used instead of adaptors and because of gum rolls without grooves, gum gets applied throughout without gaps and which results in better compression strength of box than traditional machines. This machine is recommended to be used on steam boiler or thermic fluid heaters. Machine speed is 125rftmin.

Features There are no Adapter Marks on the Board. Because the fingerless machine lacks a brass adapter, there is no possibility of brass adapter marks on the board. Compression for Increased Board Strength-Because there is a fixed flute height and diameter, the constricting strength of the board increases in a fingerless corrugation machine. Increased BF (Bursting Factor) of the Board-As the board's contraction strength increases, so does its BF.

• Width: 1400mm – 2500mm.

Corrugated roller made of Ni-Cr-Mo-alloy steel with heat treatment (hardness 55-58 HRC). Roller Surface plated with Chrome Treatment. Lower Flute Roll dia 320mm dia. Individual Gear bo- Drive separating dynamic oscillating improves running stability. The Glue application Unit can be engaged and disengaged with the corrugation roll under the parallel movement of pneumatic cylinder. Vacuum suction fingerless design provides prefect flute formation driven by heavy duty Blower. Adjustment of upper corrugated roll and preasure Roll and glue Roll controlled by Pneumatic System. Glue Roll is duly engraved and glue dam is provided for accurate transfer of Glue to the Flute Roll while formation of 2-Ply. With Dam System for control of gum transfer width wise. With preheating and pre conditioning roller.

Vacuum adsorption ,with a high-pressure blower. With wind control device machine suction silencer; electrical control box to focus on the same host ,not less than 1.5 m , the operating side of the closed side of the hood.   2.Universal joint drive,Separation structure,Independent drive box,Enclosed gear oil immersion type lubrication ,can prolong the life of the gearing.   3.Corrugated roller diameter Ø360mm,Roller is 360mm,Material alloy roller ,after quenching and tempering, hardening, polished surface chrome plated hardness of HRC60 degrees, the cylinder control up and down .   4.Pressure roller diameter Ø360mm ,modulation processing with 45# carbon steel , machining and grinding off the surface chrome plated cylinder control up and down .   5.Upper and lower Preheat roll diameter Ø400mm, machining and grinding off the surface hard chrome plated, all metal hose connection   6.Pneumatic control glue , glue roller diameter Ø240mm, engraved with the pit-style textured back surface polished, hard chrome plated, transfer roller surface machining and grinding off the hard chrome plating   7.Corrugated roller bearings with high temperature and pressure grease lubricated bearings   8.Use electric insulation glue amount device,for easy operation and well performance   9.Corrugated roller unilateral high 0.10 mm, pressure roller unilateral high 0.075 mm. Add spacing device, pressure cylinder for Ø 160 mm.

For high production with quality, this machine adopts fingerless technology. In this type of corrugation machine, air suction through compressor is used instead of adaptors and because of gum rolls without grooves, gum gets applied throughout without gaps and which results in better compression strength of box than traditional machines. This machine is recommended to be used on steam boiler or thermic fluid heaters. Machine speed is 125rft/min.

Fluterolls and pressure rolls are pneumatically adjusted with gum circulation tank. The Machine has flute rolls which are the main part of this machine. There are very minutely finishedgive the perfect impression on the board. Motorized self-loading twin shaft reel stand with three unwinding shafts helps in easy operation saving time. Electric heaters are fitted to provide lamination of board which helps to increase the efficiency and production. 

• Brand Name: M.S. Enterprises
• After-Sales Service Provided: Engineers available to service machinery overseas
• Type: Cleaner
• Condition: New
• Place of Origin: India
• Supply Ability: 10 Piece/Pieces per Month
• Automatic Grade: Semi-Automatic

Design Speed 150mt/min. Corrugated roller made of Ni-Cr-Mo-alloy steel with heat treatment (hardness 55-58 HRC). Roller Surface plated with Chrome Treatment. Lower Flute Roll dia 320mm dia. Individual Gear bo- Drive separating dynamic oscillating improves running stability. The Glue application Unit can be engaged and disengaged with the corrugation roll under the parallel movement of pneumatic cylinder. Vacuum suction fingerless design provides prefect flute formation driven by heavy duty Blower. Adjustment of upper corrugated roll and preasure Roll and glue Roll controlled by Pneumatic System. Glue Roll is duly engraved and glue dam is provided for accurate transfer of Glue to the Flute Roll while formation of 2-Ply. With Dam System for control of gum transfer width wise. With preheating and pre conditioning roller. Circulating glue supplying system is available with the Tank Pump & Motor. Available width 1400mm – 2500mm.

1, 320S Design Speed: 120m/min 2, 360S Design speed :150m/min 3, Effective width: 1400mm-2500mm 4, Corrugated roller:φ320 (φ360)mm 5, Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transmission. separate power.(optional) 6, Corrugating roller, pressure roller and glue roller by pneumatic adjustment. 7, Cardboard transmit adopt vacuum suction method, with wind control system. keep flute profiles stable of the lower-roller in the condition of running up. 8, Bearing of corrugated and pressure roller adopt high temperature lubricate grease. 9, Glue parts auto supply glue circularly. 10, The upper-lower corrugating roller are made of 48CrMo high quality alloy steel, after heat-treatment. 11,The hardness HRC58°-60°,the surface be grinding. 12, The glue part surface are treated by special mesh snicked and chrome plated. 13, Motorized or manual glue width dividing to match the paper width. 14, Glue part can be running independently or non-independently while stopped. 15. Gimbal transmission , fission structure with unattached drive box , transmission more stable , close style gear transmission oillnession lubricated , prolong the use life of gear .  

SPECIFICATIONS · Independent drive gear box ,Corrugated roll adopt high quality alloy steel · Pneumatic cylinder control up and down of corrugated roll · Pnematic pressure and gum roll control, Glue roll with hard chrome plating · Heavy duty air blower for fingerless operation

• Design Speed: 80m/min
• Economy Speed: 60m/min
• Application Medium Paper: 80gsm-170gsm
• Working Air Pressure: 0.6-0.9 Mpa
• Total Power: About 50kw
• Flute Roller Diameter: 320mm

Features vaccum s roller diameter fuction type pulling cardboard with wind control device. gluing roller and doctor roller are designed for group guidance, convenient and swift slippage load-unloading. upper flute roller, pressure roller, gluing roller move by pneumatic. the bearing of flute roller and presure roller adopt high temperature resistant lubrication grease. glue amount control through adjust the gap between gluing roller and doctor roller by manual control option) manual (motorized or computer control options) by adjustment of the gluing width. flute roller diameter: 295 mm adopts 48 crmo high quality alloy steel, with heat treatment, hardness hrc50-55, surface do ground finish and hard chrome plated. .