Fire Door Inspection As Per NFPA 80
35,000 - 45,000 Per piece
This Indian Standard was adopted by the Indian Standards Institution on 27 May 1966, after the draft finalized by the Fire Safety Sectional Committee had been approved by the Civil Engineering Division Council. One of the fire safety requirements to be taken into consideration while planning and designing industrial and non-industrial buildings is to provide the means for restricting the spread of fire, both internally and externally. The spread of fire can be minimized if the respective floor areas are limited and divided into smaller sections, each section being separated by perfect separating walls and openings therein fitted with fire-check doors. The design of fire-check doors and the materials to be used in their construction have to be such that the doors shall be capable of providing an effective barrier to the spread of fire. The fire resistance of two doors should, as far as practicable, be the same as for the wall. This standard has been prepared with a view to providing adequate guidance to both the manufacturer and the user in regard to the materials to be used and the construction to be adopted for fire-check doors capable of giving the required fire protection. As erection of fire-check doors Is a very important aspect in order to achieve the desired degree of fire protection, it is strongly advised that the fire check doors should be erected strictly in accordance with the requirements given in Appendix A of this standard. In the formulation of this standard due weightage has been given to international co-ordination among the standards and practices prevailing in different countries in addition to relating it to the practices in the field in this country. For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated. Providing and fixing of Hollow metal fire rated doors as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Test certificates should be available for vision lites /panels as part of the fire door assembly. Independent glass test certificates will not be accepted. Manufacturer test certificate shallcover doors both single and double leaf and all doors supplied should be within the tested specimen,deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Shakti Hormann or approved equivalent. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf shall be 46mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers.
Fire Proof Door
18,000 Per Piece
1 Piece (MOQ)
Best Deals from Fireproof Doors
Fire Steel Door
15,000 - 50,000 Per Piece
10 Piece (MOQ)
Fire Proof Door
15,000 - 20,000 Per Number
Fire Proof Resistant Door
15,000 Per Piece
10 Piece (MOQ)
fire proof doors
1,000 - 10,000 Per rs
Suniti Constructions is the best Manufacturer and supplier of Fire Proof Doors in Pune, Maharashtra, India. Suniti Constructions is leading Manufacturers of High density Blast Proof Doors, Explosion Resistance Fire Steel Door for Very Low Range Blast, Bomb Blast Resistant Doors, Bullet Proof Doors in India. Feel free to contact +91 7709014186 Fire Doors Manufacturers in Pune, Fire Doors Suppliers in Pune, Fire Doors Exporters in Pune, Fire Doors Manufacturers in Maharashtra, Fire Doors Suppliers in Maharashtra, Fire Doors Exporters in Maharashtra, Fire Doors Manufacturers in India, Fire Doors Suppliers in India, Fire Doors Exporters in India, Fire Proof Doors Manufacturers in Pune, Fire Proof Doors Suppliers in Pune, Fire Proof Doors Exporters in Pune, Fire Proof Doors Manufacturers in Maharashtra, Fire Proof Doors Suppliers in Maharashtra, Fire Proof Doors Exporters in Maharashtra, Fire Proof Doors Manufacturers in India, Fire Proof Doors Suppliers in India, Fire Proof Doors Exporters in India, Blast Proof Doors in Pune, Blast Proof Doors in Maharashtra, Blast Proof Doors in India
Fireproof Doors
Get Price Quote
The Halspan range of Prima and Optima door blanks are formally PEFC CoC Certified. Halspan(UK) door blanks are pre-tested according to British Standard BS476: Part22: 1987(ISO834) and EN1634 pt 1 2000. Their product array includes single leaf doors, pairs and double acting fire door configurations in flush and paneled doors. In addition, overpanels choice of frames and with glazed apertures are also available. Some of its characteristics are as follows: Halspan is a 3-layer particle board, designed to out-perform other types of board, and manufactured with doors in mind. It is ideal as a solid core door and better to make, veneer and laminate. As a branded product, it is possible for the architect or specifiers, to retain control of an original specification right through the project, thus ultimately protecting client and the public. The flexibility of Halspan increasingly meets the needs of designers: flush and panelled style doors; hardwood, softwood, aluminium and hollow steel frames; as well as glazing style options.
fire proof doors
Get Price Quote
We do not have to worry about stock-out situations or meeting bulk requirements, as we have an equipped warehouse facility. It has the latest inventory control and management software and helps us maintain continuous product availability. Customers are free to place small as well as bulk orders, timely deliveries of the same are our topmost priority.
Fireproof Doors
Get Price Quote
We are the leading supplier of Acoustic Resistant doors that are majorly used at concert halls, Cinema halls, Sports hall and in Music practice rooms. These products facilitate optimum noise reduction, which is highly effective for these areas. Made of premium quality raw material these products are highly durable and reliable. We have a special team to test these products for quality as per the international standards. We provide our clients with a customized assortment of these products as per their needs. These products are easily available in single or double leaf formats depending on the client's specifications.
Fireproof Wooden Doors
Get Price Quote
Keeping up with the latest trends, we strive to achieve utmost customer satisfaction. We, as a Manufacturer and Supplier of Fireproof Wooden Doors, deliver immaculate quality to our customers. The wood used in the manufacturing is of high-grade quality. We leave no stones unturned in meeting the standards of quality set by industry. For our valued customers, we make quick delivery of the doors at their doorstep.
Fire Proof Door
4,300 - 4,500 Per Sq. Mtr.
5 Unit (MOQ)
Fire Proof Door
Get Price Quote
Gandhi Fire Rated Doors are ideal for wall openings where headroom is restricted and frames can butt up to a ceiling or fix directly to overhead lintels. The counterbalance on the fire sliding doors are linked to the fuse and closes the door only when the fuse breakdowns at a temperature of 74°C. The fire rated doors remains in a ‘normally open’ position and in the event of fire accident it closes automatically. Fire rated doors are available in single and double leaf options. Fire Rated Sliding Doors are available in single and double leaf doors with a maximum size of 8500 mm x 6000 mm and fire resistant to DIN 4102 UNI 9723. Braking devices and automatic control systems can keep doors permanently open, but close them in an emergency.
Fireproof Doors
4,000 - 5,000 Per SQMT
10 Piece (MOQ)
Fire Proof Door
3,700 Per Square Meter
01 Square Meter (MOQ)
We have in store for our customers Fire Resistant Doors that matches international standards and are made using high-end technology. Clients can avail these in different sizes with the choice of glazing, single or double door sets, fire resistant self closing louvers, optional fixed over panels and optional temperature rise (insulation) configurations. Specifications : Available in fire resistant levels from 30 minutes up to 2 hours and testing as per BS 476 Part 20 & 22, IS3614 (Part 2) approved by CBRI (Roorkee),rnShutter sheet thickness - 1.20 mmrnInfill material - Rock Wool (45 kg /cu.m)rnFrame sheet thickness - 1.6mm
fire proof doors
Get Price Quote
Fire proof door used as a passive fire protection item within buildings to prevent the spread of fire. Fire rated doors are designed to close automatically in the event of a fire or alarmed event. Fire Doors are a mandatory requirement & have established acceptance in high rise buildings, commercial buildings, auditoriums, manufacturing facilities and so forth. In certain applications, fire doors are required to minimize the transmission of heat from one side of the door to the other, as in the stairwell of a high rise building. If the door can limit the transmission of heat for a period of time, it is possible for people in a burning building to safely pass below the floor of fire origin. These doors are built with a specifically designed core and are referred to as temperature rise doors.The use and application of fire rated doors is governed by National Building Codes as well as local fire and building authorities and available in wood and stainless steel.
Fireproof Doors
Get Price Quote
The company has cemented its presence among the reliable Suppliers and Exporters of Fireproof Doors. The offered Fireproof Doors are manufactured in compliance with international quality standards. To ensure that only excellent quality Doors reach the buyers, we source these from known vendors in the market. Bulk orders of the Doors are processed by us as per the specific requirements of the buyers.
Fireproof Doors
Get Price Quote
we are reliable destination to avail high quality fireproof doors in the market. If you wish to quickly check the spread of fire in the room, you can do so by installing fireproof doors, which we provide, in buildings. The fireproof doors are available at the market leading price. functions of fireproof doors they separate the area of origin of fire by producing and preserving isolated enclosed areas. This is called compartmentalization.they let controlled passage for smooth movement of goods and people between compartments of a building on firethey also permit "smoke-free" access to the escape routes, both horizontally and vertically.the fireproof doors also prevents fire from spreading in corridors and shafts the fireproof doors, which we make available, also comply with the legal requirements laid down by the national building code on fire safety (part iv) and the code of practice for fire safety is: 1642. The fireproof doors, which we provide, can give fire-resistance for a time period ranging from 30 minutes to 4 hours in apartments, hotels, hospitals, commercial and residential buildings (high rise). the fireproof doors can be fixed at doorwayslift shaftshoistsshaftsconveyors introduction fire starts without warning and can cause wide-spread damage. Al ittle preventive cost and proper plan help reduce this damage.fires can be fought on two fronts: first, by preventive measures and second, by fire-fighting equipments.one of the preventive measures is the use of fire doors in buildings and others are use of fire resistant coatings. these doors perform three important functions as follows they isolate the area of origin of tire by creating and maintaining separate enclosed areas. This is known as 'compartmentation'.they allow controlled unhindered 'passage of people and goods' between compartments of a building on fire.they allow"smoke-free" access to the escape routes, both horizontally and vertically and protect corridors and shafts. fire doors also satisfy the legal requirements laid down by the national building code on fire safety (part iv) and the code of practice for fire safety is: 1642. These require the use of fire doors of specified resistance-30 minutes to 4 hours -in high rise buildings, apartments, hotels, hospitals, industrial buildings, etc, for 'compartmentation' to limit the potential loss to provide 'personnel safety' by allowing easy escape to people in a building on fire. these doors of specified rating are required to be fixed at doorways, lift shafts, hoists, shafts, conveyors and other critical openings. the use of fire doors is mandatory as per delhi fire safety act 1986. technical specifications fire-resistance in a tire door is expressed in terms of minutes and is required to satisfy the following performance criteria stability : the fire door shall not collapse during the rated period of resistance under the specified fire conditions.integrity : the fire doors shall not allow the passage of hot gases or flames through the rabbet or the gap between the doors frame and shutters or through any damage developed in the shutter during fire. Smoke escaping from the door on a lower floor of a building on tire could seriously affect the escape of people trapped on the upper floors.insulation : the mean temperature of a tire door, on its unexposed side, shall not exceed 163 degree c above ambient. Lower temperature ensures quick escape of people and prevents combustion of flammable goods lying on the side unexposed to tire. fire doors are governed by the following specifications bs 476 part 8 : fire test on building materials and structures.iso 834 : fire resistance test on elements of building construction.iso 3008 : fire resistance test on doors and shutter assemblies.iso 3809 : fire resistance test on structures. asharam steel fire doors : ak-204 asharam steel composite fire doors ak- 204 is manufactured of 18g m.s. Sheet!gi sheet coated with fire resistant coating ak - 525 on both the faces and is filled with fire resistant filler to achieve a thickness of 60mm for 2 hours fire rating and 80 mm for 4 hours fire rating. asharam wooden fire doors : ak-207 asharam wooden tire door is manufactured from wooden sheet 12mm thick on both sides coated with tire resistant coating or laminates and filled with fire resistant filler to provide 50mm thickness for one hour fire rating. Door frame is manufactured out of hard wood! teak wood treated with fire resistant compound. special features of asharam fire doors available in single shutter, double shutter, single swing, double swing and sliding configuration.asharam fire check doors are manufactured using special techniques employing high grade tested materials, heat activated sealing compound, fire-resistant compounds and surface coatings to achieve “total protection”, both from horizontal and vertical fire conditions, unmatched by any manufacturer.asharam fire check doors are lighter in weight.internationally, the use of asbestos is banned in the construction of fire doors due to the extremely harmful toxic gases generated when asbestos is subjected to fire. Asharam fire check doors are completely asbestos free.asharam fire check doors consist of properly designed door frames of steel or galvanised iron in case of steel doors and seasoned hardwood or teak wood in case of wooden fire check doors conforming to is:1141. The fire –resistance is further enhanced by the application of a special fire- resistant coating.test experience has shown that the use of a heat- activated sealing compound is a must even to achieve a 30 minute fire rating . Under fire conditions, such a heat –activated in tumescent ( swelling up() seal provides a positive pressure in the gaps between the frame & the shutters. This helps eliminate any distortion which can lead to ‘integrity failure' of the door. asharam fire doors incorporate proven intumescent sealing compound which has been tested under severe fire conditions in all types of situations.during fires, the heat-activated sealing compound provided in the door assembly, and its design, play a very important role. therefore, it is essential to install the full fire door set comprising of the door frames and the shutters. If only shutters are procured from us the performance may be compromised. However, where door frames have already been fixed the dimensions, specifications and a sketch of the door frame must be sent to us to assess its suitability for incorporation of a heat-activated sealing compound and for its other fire performance criteria. asharam wooden fire doors are normally of flush type with 4mm teak or commercial plywood facing bonded with non-flammable, fire-retardant adhesives. asharam fire doors are ready to install, fully ‘painted' or ‘polished' in pleasant shades of the customer's choice using special fire-resistant coatings. The “paint”or ‘polish' finish so provided is acid-, alkali-, weather- and stain resistant and extremely durable providing twice the life as compared to conventional enamel paints or spiritshellac polish. it is desirable that fire doors installed on an escape routes to allow easy escape route should not be “secured”. This will avoid possible delay in opening it by people trapped in the building.in high rise buildings, the fire doors should open outwards towards the escape routes to allow easy escape. In such a case, to maintain compartmentation. Asharam fire doors are provided with self-closing devices. great care should be taken in the installation of a fire door so that the gaps between the frame and the shutters are kept uniform and within specified parameters. The company can install these doors for you or, if you prefer, you can install them yourself with the instructions provided. asharam fire doors are factory-treated to resist attack from termites & insects. These doors are sturdy & hardly require any maintenance.you can further improve their performance by periodically checking to see that the intumescent sealing compound in the gap between the door shutters and the door frame is maintained. Vandalism and accidental damage can affect the performance of the sealing compound. This can be repaired or replaced by contacting us at the earliest. by periodic maintenance to retain the aesthetic appearance of the doors. This should be carried out using only asharam fire-resistant coatings which help retain class I spread of flame properties. upgrading the fire rating of existing solid core flush doors is possibleby using asharam fire- resistant coatingsby providing asharam heat-activated sealing compound on door frames and shutters by redesigning the hardware on doors .
Fire Proof Door
Get Price Quote
Fire protection is a major concern for any building designers or architects. In that regard choosing the right fire protection products for your application is very necessary. Our fire proof doors reduce the spread of fire or smoke between compartments and enable safe egress from a building or structure. Avians has a vast range of fire proof doors to cater to all private, public and industrial needs.
Fireproof Rolling Doors
Get Price Quote
Highly versatile and cost effective, Ascot Fire Rolling Shutters are individually designed and manufactured to suit the specific opening, are made from high performance interlocking laths and a tee section bottom rail running in side channels and fixed to the structure. features UP TO 4 HOUR FIRE RATED
Fireproof Doors
Get Price Quote
Fireproof doors are heavily recommended for protection against any eventuality that arises out of fire. Our fire proof doors are made of cold rolled steel sheet and stainless steel and can resist fire for a long time. These doors are available in single and double door range with 1 hour and 2 hour Fire Rating. These doors are durable in construction and are largely used in multiplexes, refineries, industries, power plants, cineplex theatres and other places, in the event of fire.
