Flammability Testers Dealers

(49 products available)
  • Premium
    Flammability Tester

    Flammability Tester

    Get Price Quote

    • ApplicationUsed for Flammability Test of Garment/Fabric
    • MaterialSs Body with Digital Timer, Busier, Burner and Brushing Device
    • Size of Test Specimen183 cm x 4 cm
    • Size of Modified Test Specimen40 cm x 4 cm
    • Distance of Upper Marker Wire from the Main Clip28 cm
    • Distance of Lower Marker Wire from the Main Clip155 cm
    • Distance of Lower Marker Wire from the Auxiliary Clip10 cm
    • Diameter of Burner Opening9.5 mm
    • StandardASTM D1230, CFR – 16 – 1610
    ...more
    www
  • Vertivcal Burning Test Flammability Tester

    Vertivcal Burning Test Flammability Tester

    Get Price Quote

    NAUGRALABS LABORATORY PRODUCT NAME: FLAMMABILITY TESTER(VERTIVCAL BURNING TEST) FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-370003 Description and Specification for Lab Tenders Flammability Tester(Vertivcal Burning Test) For Testing Lab Workshop.  Flammability Tester(Vertivcal Burning Test) - The method for classification of plastic sheets or bar materials of 94V-0, 94V-1, or 94V-2 grade flammability is based on the determination of vertical burning characteristics of the material under test.   In this test, a test specimen is held from its top with its longitudinal axis lying in a vertical plane. A flame is applied for a specified duration of time to the lower end of the test specimen and removed. As soon as the material stops flaming the flame is applied once again for the same duration of time and removed. The time taken by the flame to extinguish, after the removal of the igniting flame and the duration of glowing after second application of flame are determined to evaluate the vertical burning characteristic of the material under test.   The Flammability Tester (Vertical Burning Test) for determination of vertical burning characteristic of plastic consists of a drought free enclosure, an arrangement to hold the test specimen from its top in a vertical plane, a swivelable burner to apply the flame at the tip of the test specimen, arrangement to move the burner so that its tip can be brought vertically below the lower end of the test specimen both with the burner axis being vertical and inclined at an angle of 45° to the vertical, a pre-set type digital timer to measure the time of application of flame, and a digital time interval meter to measure the flaming and after glow times.  civil lab equipments manufacturers  Plastic Films Testing Lab equipment manufacturers,exporters and Plastic Films Testing Lab suppliers
    ...more
  • Flammability Tester

    Flammability Tester

    72,800 / Piece

    • MOQ1 Piece
    • MaterialStainless Steel
    • ApplicationLaboratory
    • Model Name/NumberKTS 041
    • Packaging TypeBox
    • Display TypeAnalog
    ...more
  • Burning Testing Holder

    Burning Testing Holder

    2,049 / Piece

    • Weight (GM)60
    • PurityThe onboard high quality imported gold-plated chip carrier,By SWIM interface, directly related to the type of chip test, burning crystals can be the free replacement by the user.
    • Length (mm)     50
    • Width (mm)44
    • Height (mm)30
    ...more
  • Inclined Plane Flammability Tester +2

    Inclined Plane Flammability Tester

    78,900 - 100,000 / Unit

    • MOQ1 Piece
    • Number Of FlowerFlammability Testers
    • CertificationISO 9001:2008 Certified
    • ApplicationFabric Flammability Uses
    • Packaging TypePolished stainless steel
    • FeatureEasy To Use
    • ConditionNew
    • Frequency45Hz
    • Automatic GradeAutomatic
    • Power SourceElectric
    • Operating CurrentSingle Phase
    • Warrenty1year
    • Temperature CapacityMedium Temperature
    • Country of OriginIndia
    • Brand NameAsian
    • Power200 W
    • Used for Flammability tester for fabrics as per IS:,ASTM and BS standards
  • flammability testing machines

    flammability testing machines

    Get Price Quote

    EN ISO 11925-2 Flammability Testing Machines – Small Flame Ignitability Testers Precision Fire Testing Equipment for Surface Ignitability of Building and Transport Materials KDM Global offers advanced EN ISO 11925-2 flammability testing machines, purpose-built to assess the ignitability of construction products and railway interior materials when exposed to a small flame source. This standard is a core requirement for building material classification under Euroclass (EN 13501-1) and railway fire safety under EN 45545-2. Our small flame ignitability testers are ideal for material manufacturers, quality control labs, testing agencies, and certification bodies looking for reliable, repeatable, and standards-compliant testing systems. ✅ Standard Compliance: EN ISO 11925-2 – Ignitability test using a small flame Supports Euroclass system classification (A1 to F) Essential for EN 45545-2 requirement sets R1–R26 (railway interiors) 🔍 Applications: Building insulation materials, wall panels, and floor coverings Railway coach components – seat foams, textiles, wall panels Composite boards, wood products, foams, and plastic materials Quality control and R&D in flame-retardant material production 🔧 Equipment Features: Precision butane burner with adjustable flame size and angle Digital burn time recording and automatic flame application timer Stainless steel vertical specimen holder with heat-resistant chamber Front glass panel for observation and safety Automatic ignition system and exhaust port for fume extraction 🏆 Why KDM Global? Fully compliant with EN ISO 11925-2 and EN 13501-1 testing protocols Durable, lab-grade construction with easy-to-operate interface Installed across testing labs, factories, and rail R&D centers in India Expert after-sales service, training, and calibration support available 📩 Get a Quotation or Technical Brochure Upgrade your fire testing capabilities with a certified, cost-effective EN ISO 11925-2 small flame tester from KDM Global. 📧 Email: saleskdmglobal@ 📞 Phone: +91 / +91 🌐 Website:
    ...more
  • Horizontal and Vertical Flame Tester

    Horizontal and Vertical Flame Tester

    550,000 / Piece

    • MOQ2 Piece
    • Brand NameDNG Technologies Private Limited
    • MaterialSS & MS
    • Country of OriginIndia
    • Display TypeDigital
    • Weight80
    • Voltage220v
    • The DNG UL 94 Horizontal/Vertical Flammability Tester is a semi-automatic, bench‑sized unit engineered to perform rigorous flammability assessments across a broad spectrum of plastics. It meets critical standards—UL, IEC, ISO—delivering accurate, repeatable results and comprehensive reporting for material safety classification.
    ...more
  • Flammability Chamber

    Flammability Chamber

    Get Price Quote

    We guarantee our products are subjected to stringent quality policies to meet industry standards. Buyers can rely on us for on-time delivery as we are assisted with up-to-date transit and logistics services.   Application: Vertical Flammability Chamber / Tester for measuring the vertical flame spread of children's sleepwear, fabrics (fabric burn test), other textile materials or resilient filling materials used in upholstered furniture.Comprises a draft free stainless steel flammability chamber with the observation window and back wall painted black for easy test viewing. Calibrated burner. Flame speed is measured in time. Specimen holders, burners, and associated hardware are dependent on the test standard and must be specified.Automatic gas and timing control system of this vertical flammability tester including solenoid control gas valve and automatic ignition timer and controls.Specifications : Time Display and accuracy  -  0-999.9s,0.1s Ignition time  - 12+/-2 s Burner size  -  Dia. 10mm x barrel length 76+/-6mm Distance from burner to specimen  -  19 mm Dimension of holder  -  outside 442x76 mm, interior 356x51 mm Distance from nozzle to specimen  -  8mm Timing  - PLC controlled System and Display  - Programmable PLC system to control automatically, text display Optional Testing Kits FTMS 191-5903 (fabric) DOC FF3/71 children pajamas CALIF TB-117 Resilient Filling Materials Vertical Standards ASTM D6413,CALIF TB117, DOC-FF 3/71 16CFR Parts1615/1616,FTMS 191-5903 Power 220 /110 V 50/60 Hz 2 A Weight 20 Kg Dimensions 630×400×880 mm(LxWxH)
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    • ApplicationControl Panels
    • Packaging TypeAvailable in Many Colors
    • Frequency45Hz
    • Automatic GradeAutomatic
    • Power SourceElectric
    • FeatureEasy To Use, Proper Working
    • We are one of the leading Manufacturers, Exporters and Suppliers of Flammability Tester. Flammability Tester is used to measure ignition temperature of fabrics. Our Flammability Tester is well-equipped with PLC to manage testing unit. Designed with high grade test burner, our Flammability Tester facilitates burning at 45o or 9o. The precision-engineered exhaust vents of our Flammability Tester guarantee sensible ventilation and steady flame. Crystal rectifier panel of our Flammability Tester displays ignition time and burning time. Technical Specifications : Digital Timer Flame Length 16 mm Flame Source - L.P.Gas Flexible Tubing 1.5 meter Burning Area 105 mm x 40 mm Size of Specimen Holder 175 mm x 80 mm Multipurpose gauge to measure flame length. Specimen cutting template size 500mm x 150mm Specimen Holder receiver tray position 45o Angle Stainless Steel Body with fine quality acrylic door. Related Standards : ASTM D 1230 CRF 16-1610 FTMS 191-5908
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    Description :- Flammability Testers are mainly used for testing the flammability and resistance to propagation of flame of materials used in the interiors of motor vehicles. The apparatus also determines the comparative burn rates of cloth, including pile and napped cloth. Salient Features: The apparatus consists of a horizontal flame or combustion chamber made of stainless steel sheet, in which test is carried out. There is a polycarbonate window in the flame chamber for observing the test specimen during test. There is a test specimen holder, used for mounting the test specimen during test. There is a Bunsen burner to provide flame. Supplied with an array of timers, which controls the flame application time and measures the flame time. There is a pre-set type electronic timer, which starts automatically as soon as the test specimen is brought in position above the Bunsen burner.
    ...more
  • Burn In Testing Machines

    Burn In Testing Machines

    1,000,000 - 3,500,000 / NOS

    • MOQ1 NOS
    • TypeBurn In Testing Machine
    • MaterialMetal, Plastic
    • Voltage110V, 220V
    • Power SourceElectric
    • Frequency50Hz, 60Hz
    • Dimensions50x50x50 Cm
    • Weight30 Kg
    • DisplayDigital
    • ControlManual, Automatic
    ...more
  • Flammability Test

    Flammability Test

    Get Price Quote

    • Test AppalicableUL (HB/V0, V1, V2/5VA, 5VB)
    • Chamber Size1 m x 1m x 1m (LBH)
    • Chamber ConstructionDouble Walled, Inner Chamber made of Stainless Steel, Outer MS / GI
    • BurnerBunsen Burner, with adjustable flame length
    • Burner PositionAdjustable form 0 to 90 deg (useful for both Vertical and Horizontal Burning)
    • Burner MovementAutomated using PLC logic
    • Sample HolderProvided for both Vertical and Horizontal Test
    • ControlAll Funtions including Burner Movement, timers etc are controlled by PLC
    • ResultsPLC accumulate all the results and give the compliance of the sample
    • DisplayUsing a touch screen HMI
    • Delivery6 to 8 Weeks
    • PackingOne Wooden Box
    • The UL test serves as a preliminary indication for Plastics components acceptability for use as part of a device or appliance with respect to its flammability. The instrument is designed for both Vertical and Horizontal burning.
    ...more
  • Flammability Tester 45 Degree

    Flammability Tester 45 Degree

    Get Price Quote

    • Power220/110 V, 50/60 Hz, 2 A
    • Time Display and Accuracy0-999.9s, 0.1s
    • Ignition time1 +/- 0.05s
    • Dimension of holder outside205 x 76 mm, interior 165 x 40
    • Distance from nozzle to specimen8mm
    • Weight35 kg
    • StandardsASTM D1230, FTMS 191- 5908, 16 CFR - 1610, CALIF TB11
    • Width400 mm (16 inch)
    • Depth300 mm (12 inch)
    • Height500 mm (20 inch)
    • 45 Degree Flammability Tester, to determine fabric flammability (fabric burning test) under controlled conditions. Automatic igniter is equipped to ensure the 45 degree fabric flammability tester safe and easy to operate.   Stainless steel test cabinet with glass observation panel provides with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device is included.   Original Accessories 1 Brushing device 1 No. 50 sewing thread 5 sets of sample holder
    ...more
  • Horizontal Flammability Tester

    Horizontal Flammability Tester

    Get Price Quote

    Our experts put their immense efforts in offering HMV Horizontal Flammability Tester. By using quality-approved components, this tester is manufactured under the visionary guidance of our experts in accordance with global market standards with the aid of pioneering techniques. The provided tester is used to check the flammability of plastics. Also, our clients can avail this HMV Horizontal Flammability Tester from us at an economical price range from us.Features: Trouble-free functionality Low maintenance Sturdy construction Easy operation Description: The NUNES Flammability Tester for interior of motor vehicle consists of a stainless steel box. The box has four slits of specified width on the upper part of all sides and the bottom plate has 10holes of specified diameter. The box have an access window of a heat resistant glass plate in the front, and a door that have a slot that allow U-shaped clamp enter the box, and a hole for passing a hose from a gas burner, on the side. The box is fitted with four legs and the bottom part raised by 10mm. the clamps made of metal of U-shape of a specified dimension. A Bunsen burner of specified dimension is fitted on the bottom of the stainless steel box. The length of flame control with the help of the needle valve. The flame of the burner is automatically controlled with the help digital preset timer and synchronous motor. Technical Data:
    ...more
  • Flammability Tester

    Flammability Tester

    70,000 / Piece

    • MOQ01 Piece
    • MaterialSS
    • Power SourceElectric
    • Frequency50 Hz
    • StandardsIS 11871-1986
    • BrandGlobe Enterprises
    • VoltageAC 220 V
    • Dimension750 x 360 x 940 mm
    • Weight25 Kg
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    “TECCHNO” Flammability Tester   Common Features The  complete equipment consists of jet for flammability,specimen holding arrangement, digital timer, arrangement of adjustment of fabric width, SS enclose for test setup, synchronous motor arrangement to give motion to burner tip is also provided.Brushing device (Spray nlon brush) to prepare test specimen is provided with Instrument     Automatic Flammability Tester   Inclined plane type, in which test specimen is held in sheet metal holder at an inclination of 45 deg. C and a flame from standard jet is made to impinge on upper face of fabrics near distance of 127mm determined to evaluate flammability of fabric under test.     Vertical Flammability Tester   Vertical Type Flammability Tester in which test specimen is held vertically and a flame from standard jet is made to impinge on upper face of fabics. Note : A small gas cylinder of 3 to 5 Kg is provided with instruments standard accessory.    
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    • ApplicationIndustrial Use
    • FeatureEasy To Use, Four Times Stronger
    • Frequency45Hz
    • Automatic GradeAutomatic
    • Power SourceElectric
    • Warranty1 Year
    ...more
  • Flammability Tester - IS 15061

    Flammability Tester - IS 15061

    Get Price Quote

    • FeatureAutomatic Flame Stop mechanism installed, Easy installation, Low maintenance, Made as per industrial standards
    • Flammability testing determines how easily a material or finished product will ignite or burn when exposed to or used near fire or heat. Flammability testing covers several different testing protocols and methods intended to measure a material's vulnerability, including its susceptibility to an ignition source, its propensity to combust, and the rate at which it will burn when ignited. The Tester is based on IS 15061, The standard is applicable to check the burning behavior (ignitability, burning rate and melting behaviour) of interior materials used in motor vehicles. MODEL      PFT-IS 15061. Flammability testing determines how easily a material or finished product will ignite or burn when exposed to or used near fire or heat. Flammability testing covers several different testing protocols and methods intended to measure a material's vulnerability, including its susceptibility to an ignition source, its propensity to combust, and the rate at which it will burn when ignited. The Tester is based on IS 15061, The standard is applicable to check the burning behavior (ignitability, burning rate and melting behaviour) of interior materials used in motor vehicles. Flammability test methods measure how easily materials ignite, how fastly they burn and in which manner they react when burned. During the test, samples are exposed or, held in a vertical/horizontal position, to a flame and determining the speed of propagation of the flame over the material to be tested.  
    ...more
  • Flammability Test 1200

    Flammability Test 1200

    68,500 / Piece

    • MOQ1 Piece(s)
    • Number Of FlowerFlammability Testers
    • ApplicationFlammability Test
    • ConditionNew
    • Automatic GradeAutomatic
    • Power SourceElectric
    • FeatureEasy To Use, Proper Working
    • Temperature CapacityHigh Temperature
    • Brand NameCKE
    • ApplicationFlammability
    • MaterialM.S.
    • Enclosure Size450X320X1200 mm (LXBXH)
    • BurnerBunsen
    • ValveGas Control
    • the flammability test chamber is widely used for testing the electrical and electronic product like cable , condit pipe and othe pvc material.
  • Flammability Tester, Vertical Plane

    Flammability Tester, Vertical Plane

    Get Price Quote

    We are offering flammability tester is used for determination of flammability and flame resistance of textile material. Our product is made of stainless steel drought proof box with front acrylic plastic window. Further there is an arrangement to support the specimen at 45°c to the horizontal brushing device and lpg cylinder provided with the instrument. size of the gas burner : 305 x305 x 760mm , about 150 long x 9 mm internal diameter size of the test specimen : 315 x 50 mm size of the flame : 38 mm
    ...more
  • Flammability Tester i9 (Horizontal, Auto Industry)

    Flammability Tester i9 (Horizontal, Auto Industry)

    100 - 200 /

    • MOQ1 Piece
    • Number Of FlowerFlammability Testers
    • CertificationISI Certified, ISO 9001:2008 Certified
    • FeatureEasy To Use, Proper Working, Superior Finish
    • ConditionNew
    • WarrentyLifetime Buyback Warranty
    • Country of OriginIndia
    • Brand NameParamount
    • In a Flammability Tester the Fabric is kept at horizontally in a specimen holder rack. It is then exposed to the Flame of specified length at 90° from specimen and is left for burning. The time taken to burn the fabric is recorded on DIGITAL Timer. Also, the time taken to completely burn the sample is noted with the After-Flame Timer. Paramount Flammability Tester i9™ is Next Generation Specialized equipment to determine flammability of the fabrics. It is made up of steel with toughened glass door. The PANEL housing all the controls is at Lower Front portion of the Unit. Specially designed fine gas regulator is provided to regulate the flame length smoothly. The specimen holder tray is specially designed in such a way to give exact Burning Period Time as soon as it is inserted into its position. The ashes produced after burning of samples is collected in the ash tray provided, which can be easily removed by opening the front door.
    ...more
  • UL 94 Chamber (Horizontal Vertical Flame Chamber)

    UL 94 Chamber (Horizontal Vertical Flame Chamber)

    Get Price Quote

    • Power1-3kw
    • Automatic GradeAutomatic
    • ConditionNew
    • Driven TypeElectric
    • UL 94 Chamber (Horizontal Vertical Flame Chamber) – Fire Testing Equipment by KDM Global KDM Global is a trusted manufacturer and supplier of the UL 94 Chamber (Horizontal Vertical Flame Chamber), designed to test the flammability of plastic materials in accordance with the UL 94 standards. This advanced fire testing equipment is essential for industries such as electronics, automotive, construction, and manufacturing to ensure that materials meet stringent fire safety and flammability regulations. The UL 94 Chamber is capable of evaluating the flammability of plastic materials in both horizontal and vertical orientations. This UL 94 Chamber helps manufacturers comply with international safety standards, providing critical data on the ignitability and flammability characteristics of plastic materials used in consumer and industrial products. Key Features: UL 94 Compliance: Fully compliant with UL 94 standards, ensuring that the chamber meets international requirements for flammability testing of plastic materials. Horizontal and Vertical Testing: Capable of performing both horizontal and vertical flame tests to assess material behavior under different fire exposure conditions. Precise Flame Control: Equipped with adjustable flame height and timing to simulate real-world fire conditions accurately. Advanced Monitoring System: Incorporates a real-time monitoring system with a digital display to track flame duration and other critical data during testing. Durable and Reliable: Constructed with high-quality materials for long-lasting durability and consistent performance in industrial environments. User-Friendly Interface: Designed for easy operation with simple controls and automatic test cycle to reduce human error. Applications: Electronics Industry: Tests plastic materials used in electrical components, cables, and circuit boards to ensure fire safety and flammability compliance. Automotive Industry: Evaluates plastic components in vehicles, ensuring that materials used in interiors and exteriors meet flammability standards. Construction Industry: Tests building materials such as insulation and cladding to ensure compliance with fire safety regulations. Plastic Manufacturing: Assesses various plastic materials, including polymers and composites, to determine their ignitability and flammability under fire conditions. Consumer Goods: Ensures that plastic parts used in consumer products like household appliances and toys comply with fire safety standards. Why Choose KDM Global’s UL 94 Chamber? Compliance with UL 94: Meets UL 94 standards to guarantee that plastic materials meet internationally recognized flammability safety requirements. Accurate and Consistent Testing: Provides precise and repeatable results to assess the fire resistance of materials, helping industries meet fire safety regulations. Versatility: Ideal for testing a wide variety of materials in different industries, including electronics, automotive, construction, and plastics manufacturing. Durable and Reliable: Built with high-quality components for durability and long-term performance, ensuring dependable results even with frequent use. Efficient and Easy Operation: The automated testing process reduces human error and increases efficiency, saving time while ensuring accurate results. KDM Global’s UL 94 Chamber (Horizontal Vertical Flame Chamber) is the ultimate solution for testing the flammability and fire safety of plastic materials. With its UL 94 compliance, accurate testing capabilities, and durable design, it helps manufacturers meet international fire safety standards with ease.
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    • Power220V, Single phase, 50 Hz
    • MaterialStainless Steel
    • Specimen Size1/2″X5″ for Horizontal and Vertical Burning Test and 8″X2″ for Vertical Burning Test using Thin Material
    • Accuracy± 2% at full range.
    • Specimen Holder Angle45° & 90°
    • The distance between Burner & Specimen10mm±1mm
    • Digital Timer Range999.9 Second
    • Digital Timer Least Count0.1 second
    • Igniting Flame Length20mm±1
    • Flammability Tester (UL94) is a smart technology which is used to perform the Standardized testing applications for assuring that the Plastic Materials are flammability safe for Parts in Devices and Appliances. It is very important to note that this test does not compare the real-life fire hazards a specimen can face, it just guides in categorizing sample as per its resistance to flammability situations. Plastic parts which are utilized by the electronic products or in computer systems must be resistant towards fire incidents. These material can easily catch fire and damage the entire body. Customers demand that the plastic material used in such devices must clear the UL 94 standard. Therefore, selecting the best and reliable testing system is very important.
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    Product Description All Stainless Steel, Flammability Tester with Stainless Steel Brushing device. This latest model has changed internal designs to undertake large number of Testing conveniently in a Short Time. The unit adheres to ASTM D-1230 & other International Standards Stainless Steel Test Cabinet with clear Observation Panel. The unit has DIGITAL Timer for automatic Timing of flame speed. Supplied with 5 Nos. Stainless Steel Specimen Holders, Clips for fixing the Specimen, Clips for Micro Switch Operation, Dead Weight, 2 Nos. Guages, empty Gas Cylinder, Gas Pipe with Stainless Steel Clamps along with Brushing Device. Complete unit with a CALIBRATION CERTIFICATE, Traceable to NPL, along with an Inspection and Conformance Certificate.
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    Flammability Tester(Vertivcal Burning Test) - The method for classification of plastic sheets or bar materials of 94V-0, 94V-1, or 94V-2 grade flammability is based on the determination of vertical burning characteristics of the material under test. & In this test, a test specimen is held from its top with its longitudinal axis lying in a vertical plane.
    ...more
  • Digital Flammability Tester

    Digital Flammability Tester

    85,000 / Piece

    • MOQ1 Piece
    • MaterialMILD STEEL
    • Brand NameIKON INDUSTRIES
    • PowerNIL
    • FeaturesLong service life, Immaculate finish, Simple design, High efficiency, Sturdy construction, Smooth performance .
    • Model Number/NameIK/DFT/01
    • Type Of Testing Machinesdetermine flammability of the fabric by 45 Dgree angle method.
    • Display TypeDIGITAL
    • Automation GradeAutomatic
    • GradeAutomatic
    • SupplyDC
    • We are one of the prominent firms in offering a wide range of Digital Flammability Tester in the market. Our provided products are designed under the supervision of experts. Features: Long service life Immaculate finish Simple design High efficiency Sturdy construction Smooth performance Product Details: Digital flammability tester used to determine flammability of the fabric by 45° angle method. With fine gas control system to regulate the flame length. Movable sample mounting mechanism to adjust the sample as per standards. Digital control panel with resettable timer & transparent glass door to view sample on testing. The equipment adheres to C.E specifications for safety. Complete with all accessories including brushing device for raised fibre fabrics. Supplied with Inspection & Calibration Certificates. Supplied with Inspection & Calibration Certificates.  Dimension: LengthDepthHeight365 mm180 mm570 mm.14 Inch11 Inch22.5 Inch Related Standards: ASTM D 1230, FTMS 191-5908, CRF 16-1610, CALIF TB 117.
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    Flammability tester is a consistent tool useful for checking the burning characteristics under controlled conditions. Flammability of fabrics may be determined by igniting one end of fabric under test by mean of a suitable burner having a specified flame intensity and determining the extent of propagation of flame and the time taken to propagate the flame.
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    For varied testing requirements we offer our range of Flammability Tester which is designed and developed confirming to IS standards. These are used to test sustainability of cables under fire conditions.
  • 45 DEGREE FLAMMABILITY TESTER

    45 DEGREE FLAMMABILITY TESTER

    Get Price Quote

    • Angle of inclination45o
    • Specimen holderU-shape 205mm x 76mm (inner 152mm x 38mm)
    • Stop thread height9.5mm
    • Ignition timeAdjustable with 0.1s accuracy
    • Time counterAutomatic timer with 0.1s accuracy
    • IgniterNeedle valve burner
    • Indicator fingerStainless steel typical indicator finger
    • Gas shieldStainless steel typical gas shield
    • Terminal pointAutomatic stop when reaching stop thread
    • Power supply220V 50/60HZ
    • Dimension1300mm x 550mm x 600mm, 51.18inch x 21.65inch x 23.62inch
    • Net weight80kg 176.37lb
    ...more
  • Flammability Tester

    Flammability Tester

    Get Price Quote

    • Power Supply220 V, Single Phase
    • Motor RPM7.2
    • TimerDigital
    • Accuracy1/10 of a second
    • Flame Spread130 mm
    • Height of stop cord above sample9.7 mm
    • Stop Cord specification50 Tex , Mercerized cotton.
    • Gauge specification19 mm, 16mm & 8 mm.
    • Flame length8 mm
    • Amith Garments 45◦ Flammability Tester is used to evaluate flame resistance of fabric. Product Details : Amith Garments 45◦ Flammability Tester is completely made of mild steel which is duly powder coated for long life and aesthetics. Specimen holder is fitted at45◦. Flame moves to and fro with the help of cam through motor. Special gas regulator is provided for controlling the flame length. Specially designed gauge is supplied for setting flame position. Digital timer of 1/10 seconds is provided for highly accurate results. Standard cord of 50 Tex is supplied to stop the flame spread.   Special Features : 45◦ Flammability Tester to check flame resistance to fabrics. Standard stop cord of 50 tex. Re-settable Digital Timer for setting time. Special Gas regulator. Specially Designed gauge for setting flame position.
    ...more
Filter by City
top