Flat Jacks Dealers

(20 products available)
  • Premium
    Single Acting Hydraulic Flat Type Jack +3

    Single Acting Hydraulic Flat Type Jack

    12,500 - 92,500 / Number

    • MOQ1 Number
    • Number Of FlowerHydraulic Jacks
    • Capacity5-150T
    • Total Carbohydrate1 Year
    • Country of OriginTAIWAN
    • Brand NameSUN-RUN
    • UsageCompact design for use in narrow space.
    • PurityChrome plated plunger resist wear, rust and extend jack life. Stop ring for piston blow out protection. Maximum sized springs speed piston return and also increases spring life.
    • Single-Acting / Flat Type / Button JackRSSM SERIES
    • It hasGrooved plunger ends that require no saddle.
    • we are offering single-acting flat type hydraulic jack button. capacity : 5 tons - 150 tons 1. compact design for use in narrow space. 2. single acting spring return. 3. chrome plated plunger resist wear, rust and extend jack life. 4. coupler sqb-38uf and dust cap are incorporated on all models. 5. there is a stop ring for piston blow out protection. 6. maximum sized springs speed piston return and also increases spring life. 7. it has grooved plunger ends that require no saddle.                     
    ...more
    www
  • FLAT JACKS SINGLE ACTING

    FLAT JACKS SINGLE ACTING

    Get Price Quote

    Compact and flat design ideally suited where clearance is minimum for insertion of jack. Mounting holes for easy fixturing. Used for structural weld positing, rigging in bridge construction, heavy fabrication and maintance. Caution-Provide leavel and soild support for entrie jacks base area since the ram guide length is small
    ...more
  • Flat Hydraulic Jacks

    Flat Hydraulic Jacks

    Get Price Quote

    Established as a dignified name, we are the celebrated organization in the market offering quality Flat Hydraulic Jack. Our complete range of products is subjected to stringent quality tests to ensure they are as per norms of international management systems.   Details : Capacity 5 - 200 ton Strock 8 - 16 mm Max. Working pressure - 700 bar Compact & flat design ideally suited where clearance is minimum for insertion of jack Mounting holes for easy fixturing. Used for structural weld positioning, rigging in bridge construction heavy fabrication and maintenance
    ...more
  • Flat Jacks

    Flat Jacks

    Get Price Quote

    We deal in Flat Jacks (MT-RSMS Series) is manufactured from quality-tested metals only. The Flat Jacks have compact design and are corrosion-resistant. We can make available Spring Return Jacks in various dimensions.   Single-Acting, Flat Type Compact design for use in narrow space Single acting, spring return Chrome plated plunger resists wear rust and extends life SQB-3/8ULF coupler and dust cap are icluded on all models.
    ...more
  • Rectangular Flat Jack

    Rectangular Flat Jack

    Get Price Quote

    For measuring in-situ rock stress close to the surface of excavation. The method consists of cutting a slot, thereby relieving the stresses perpendicular to the slot, resulting in the deformation of the slot, which is measured. Flat Jack is then embedded in the slot and grouted. Hydraulic Pressure is applied through the flat jack until the displacements which took place on slot cutting are reduced and finally cancelled. By measuring the cancellation pressure in two mutually perpendicular directions, the in-situ stress close to the rock surface can be assessed approximately.
    ...more
  • Flat Jack

    Flat Jack

    500 - 6,000 / Piece

    • MOQ1 Piece
    • Country of OriginIndia
    • Capacity10to 104 Tons
    • Stroke Length6mm
    • Work Pressure700Bar
    • ApplicationIndustrial
    • FeatureGood Quality and fine Finish
    • ColorBlue and Black
    • FinishColor Coated
    ...more
    PRS Verse
    Satara
    GST 3 yrs 4.0 (1)
  • Hydraulic Flat Jack

    Hydraulic Flat Jack

    25,000 / Piece

    • MOQ1 Piece
    • Capacity10-100 Ton
    • Usage/ApplicationVertical and Horizontal Position and in confined areas
    • Packaging TypeBox
    • Working Pressure700 Bar
    • Stroke16 mm-25 mm
    ...more
  • Flat Jacks

    Flat Jacks

    Get Price Quote

    Flat Design Allows Operation in Close tight Spaces Body Mounted Fixturing Grooved, Hardened Piston Absorbs Full Force Provided With Carrying Handles in Some Models
  • Flat Jack

    Flat Jack

    Get Price Quote

    Flat Jack - Single Acting, Spring ReturnApplication :-Compact and flat design ideally suited where clearance is minimum for insertion of jack.Mounting holes for easy fixturing. Used for structural weld positing, rigging in bridge construction, heavy fabrication and maintenance.Caution-Provide level and solid support for entire jacks base area since the ram guide length is small.Specifications: Capacity - 5 ton to 200 tonStroke - 8 mm to 16 mm
    ...more
  • Premium
    Hydraulic Cylinder Low Height Jacks Plain RAM

    Hydraulic Cylinder Low Height Jacks Plain RAM

    1,499 / Piece

    • MOQ1 piece
    • Capacity50 Ton
    • Usage/ApplicationConstructon
    • Weight Of Jack20 KG
    • Close Height210
    • MaterialEN-19
    • ColorCHROME PLAT
    • Operating ModeManual
    • HeightMIN=75MM TO MAX=250MM
    • I Deal InNew Only
    • Handle Length660 mm
    • Hydraulic cylinder low-height jacks with a plain ram are specialized jacks designed to operate effectively in environments with minimal clearance. These jacks are ideal for lifting heavy loads when there isn’t enough space for a traditional jack. They have a low-profile design and utilize a plain ram (non-threaded) to provide lifting capability without fine adjustments. Specifications for Hydraulic Cylinder Low-Height Jacks with Plain Ram1. General Specifications Model: [Specific Model Name] Manufacturer: [Manufacturer Name] Type: Low-Height Hydraulic Cylinder Jack with Plain Ram 2. Lifting Capacity Maximum Load Capacity: Range: Typically from 2 tons (4,000 lbs) to 20 tons (40,000 lbs) depending on the model. Units: Tons or pounds (lbs). 3. Dimensions Minimum Height: Range: 2 inches (51 mm) to 6 inches (152 mm). This is the lowest height the jack can achieve, allowing it to fit under very low-clearance vehicles or equipment. Maximum Height: Range: 8 inches (203 mm) to 15 inches (381 mm). This indicates how high the jack can lift a load. Diameter of Base: Range: 6 inches (152 mm) to 12 inches (305 mm). A larger diameter base provides stability during lifting. 4. Weight Net Weight: Range: 30 lbs (14 kg) to 70 lbs (32 kg). Heavier models are typically designed for higher capacities. Shipping Weight: Slightly higher due to packaging. 5. Construction Material: Primary Material: High-strength steel or aluminum alloy to ensure durability and load-bearing capability. Finish: Type: Powder-coated or corrosion-resistant finish to prevent rust and wear. 6. Hydraulic System Hydraulic Fluid Capacity: Range: 0.3 gallons (1.1 liters) to 0.6 gallons (2.3 liters). The fluid capacity impacts the jack's lifting efficiency. Pump Mechanism: Type: Manual hand pump or optional powered pump (electric or pneumatic) for easier operation. Hydraulic Fluid Type: Common Fluids: Mineral oils or other hydraulic fluids as specified by the manufacturer. 7. Plain Ram Features Ram Type: Design: Plain ram, which provides vertical lifting without fine adjustment threads. Material: Construction: Made from hardened steel or alloy for strength and durability. 8. Safety Features Relief Valve: Purpose: Prevents overloading by releasing excess pressure to protect the hydraulic system. Safety Lock: Feature: Some models include a safety lock to secure the jack at the desired height. 9. Handle and Operation Handle Length: Range: 24 inches (610 mm) to 30 inches (762 mm). Provides leverage for ease of use. Material: Construction: Steel or reinforced composite for strength. 10. Portability Casters/Wheels: Option: Some models come with wheels or casters for easier mobility, especially useful in workshops. Carrying Handle: Feature: Integrated handle for easier transport.
    ...more
    www
  • Flat Jack

    Flat Jack

    Get Price Quote

    We are one of the major Flat Jack Manufacturers and Suppliers located in India. Our Flat Jack is widely demanded in the market due to its effective performance and high tensile strength. Our RFS Pad Flat Jack is sturdy in construction and easy to move from one place to another place. Our Flat Jack is a single acting spring return Jack that can be availed in cost effective prices. Lifting Capacity : 5 Ton to 150 Ton Specifications : Stop rings for piston blow-out protectionDomed piston available to avoid side load Plated pistons to resist corrosion and scoring High flow couplersMounting holes in 5, 10, & 20 Ton modelsRod wiper for the protection of inner cylinder from dirtExceeds ANSI/ASME B30.1 safety standardsPower pumps with Suc-O-Maticâ„¢ feature are ideal for load return cylinders
    ...more
  • 10 Ton Flat Jack

    10 Ton Flat Jack

    22,500 / Set

    • MOQ1 Set(s)
    • white and orange22500
    • 10 ton flat jack copmany - power team u.s.a. stroke - 10 mm , 20 mm , 25 mm  
  • Flat Jacks

    Flat Jacks

    Get Price Quote

    We are offering flat jacks.
  • Single Acting Flat Jack

    Single Acting Flat Jack

    Get Price Quote

    Single Acting Flat Jack, Hollow RAM Jack, Hydraulic Nut Splitte
  • Hydraulic Flat Jack

    Hydraulic Flat Jack

    Get Price Quote

    Hydraulic Flat Jack, Mechanical Track Jack, Fuel Dispensing Hos
  • Flat Jack

    Flat Jack

    Get Price Quote

    Flat Jack, Truck Transmission Parts, Low Height Jacks, Single Acting Jack
  • Flat Jack

    Flat Jack

    Get Price Quote

    Flat Jack, Brake Drum, Hydraulic Jacks, Hydraulic Part
  • Flat Jack

    Flat Jack

    Get Price Quote

    Flat Jack, Tractor Trolley Hub, Single Acting Jacks, Low Height Jack
  • Hydraulic Flat Jack, Neotech

    Hydraulic Flat Jack, Neotech

    Get Price Quote

    Hydraulic Flat Jack, Neotech, Hydraulic Trolley Jack, Titan Tool
  • Hydraulic Flat Jack

    Hydraulic Flat Jack

    Get Price Quote

    Hydraulic Flat Jack, Hydraulic Floor Jack, Hydraulic Control Pane
Filter by City
top