Float Ball Valve Dealers

(88 products available)
  • Floating Ball Valve

    Floating Ball Valve

    250 - 9,870 / Piece

    • MOQ10 Piece
    • MaterialStainless Steel
    • ApplicationGas Fitting, Water Fitting
    • SizeStandard
    • Number Of FlowerFloating
    • Country of OriginIndia
    ...more
    www
  • Floating Ball Valves

    Floating Ball Valves

    1,500 - 2,000 / Piece

    • Brand NameBaumer
    • MaterialCarbon Steeel, Stainless Steel
    • ApplicationGas Fitting
    • Size3/4inch
    • CertificationISO 9001:2008 Certified
    • FeatureCasting Approved, Durable
    • PatternPlain
    • Number Of FlowerFloat Ball Valve
    • Country of OriginIndia
    • Number Of Way2way, 3way
    • Floating ball valves are a type of quarter-turn valve used to control the flow of liquids or gases in pipelines. The valve features a ball with a hole or port through its center, which rotates to either allow or block flow. In a floating ball valve, the ball is not fixed in place but \\\"floats\\\" within the valve body, relying on the pressure of the fluid to press the ball against the seat, creating a tight seal. This design makes them ideal for medium- to high-pressure applications, providing reliable sealing even under varying flow conditions. Floating ball valves are commonly used in industries like oil and gas, water treatment, and HVAC for flow regulation, shutoff, or diversion. They offer low torque operation, meaning less force is required to turn the valve. Made from materials like stainless steel or brass, they are durable and resistant to corrosion, making them suitable for aggressive or corrosive fluids. These valves are available in manual or actuated versions, allowing for both manual control and automated operation. Floating ball valves provide a simple yet effective solution for fluid isolation, ensuring minimal maintenance and long service life. They are designed for easy installation and offer a reliable and efficient way to manage flow in a variety of applications.
    ...more
    www
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • MOQ10 Piece
    • MaterialStainless Steel
    • FeatureCasting Approved, Durable, Investment Casting
    • Brand NameARC-LOK
    • TypeFloating
    • PressureHigh, Low, Medium
    • Size1/2 to 8 Inch
    • Size (inch)1/8 Inch to 2 Inch
    ...more
    www
  • Floating Ball Valve

    Floating Ball Valve

    200 - 1,000 / Piece

    • MOQ100 Piece
    • Country of OriginIndia
    • MaterialMetal
    • FeatureBlow-Out-Proof, Casting Approved
    • Size½-24 inch (DN15-DN600)
    • Class150-2500
    • MOCWCB,CF8,CF8M, A105, Lf2, F304, F316, etc.
    ...more
  • API 6D Floating Ball Valve, A216 Wcb, 2 Inch, 600 LB, Lever

    API 6D Floating Ball Valve, A216 Wcb, 2 Inch, 600 LB, Lever

    Get Price Quote

    • ApplicationThe Oil And Gas Industry
    • MaterialCarbon Steel.
    • ProductBall valve.
    • Nominal diameter2-32 Inch.
    • Design temp.Down to -29℃.
    • Design pressureClass 150 -2500 LB.
    • Design standardAPI 6D.
    • Face to faceASME B16.10
    • OPERATIONLEVER
    • Connection endFlange.
    • Test standardAPI 598.
    • PackagePlywood
    • SEATDEVLON, PTFE
    • Manufacturer of API 6D floating ball valves: Constructed with ASTM A216 WCB material, these valves are designed for a 2-inch size and Class 600 LB rating. Featuring a side entry design with a bolted bonnet, they operate with a lever and come with RF ends. They undergo API 598 testing for quality assurance.
    ...more
  • Alloy 20 Floating Ball Valve

    Alloy 20 Floating Ball Valve

    Get Price Quote

    • BodyAlloy 20, Duplex Stainless Steel, Super Duplex, Hastelloy C276/B3, Inconel, F347, F44, F317L, F321,
    • BallSS304, SS316
    • End CapCF8, CF8M
    • BoltingA193-B8
    • Ball SeatPTFE
    • PackingPTFE
    • StemSS304, SS316
    • GlandSS304
    • HandleSS304
    • NutA193-B8
    • Design and ManufactureAPI 6D
    • Pressure TestAPI598
    ...more
  • ASTM A350 LF2, LF3, LF5 Floating Ball Valve, Pneumatic

    ASTM A350 LF2, LF3, LF5 Floating Ball Valve, Pneumatic

    Get Price Quote

    • Number Of FlowerFloating Ball Valve
    • MaterialForging ASTM A350 LF2,etc
    • SizeNPS 1/2-4 Inch
    • PressureClass 150-2500 LB
    • BoreFull Bore, Reduced Bore
    • OperationPneumatic
    • SealGasket
    • Test & InspectionAPI 6D, API 598
    • ASTM A350 Floating Ball Valve Factory in China: ASTM A350 LF2, LF3, LF5 Floating Ball Valve, API 6D, API 608, ISO 17292, 1/2-4 Inch, Class 150-2500 LB, Pneumatic.
    ...more
  • Forged Floating Ball Valves

    Forged Floating Ball Valves

    Get Price Quote

    We manufacture, supply as well as export Forged Floating Ball Valves in bulk and marginal quantities. They are available in different grades and specifications and are a delight to be used as they do not require much maintenance. Easy to install and operate, they promise high levels of performance each and every time. We securely pack the goods and transport them in such a way that there is no loss.
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    4,000 / Piece

    • MaterialCarbon Steeel, Stainless Steel
    • CertificationISO 9001:2008, API
    • ApplicationGas Fitting, Oil Fitting, Water Fitting
    • FeatureDurable
    • Brand NameIPC
    • TypeFloating Ball Valve
    • PatternPlain
    • PressureHigh, Low, Medium
    • Structurestd
    • MediaLiquid / Gases
    • Port Size15mm to 600mm
    • Temperature Of Media( -29 to 480 )Deg Centigrade
    • Pressure Rating Class#150, #300, #600
    • Sizes15mm to 600mm
    • Mfg StandardsAPI 6D / ISO 17292 / ASME B16.34
    • Testing StandardsAPI 598 / API-6D
    • End DetailsASME B165 / ASME B1625
    • Fire SafeAPI 607 / API 6FA
    • End ComConnector, Flanged - Spection
    • Low torque design of ball valves make them very easy to operate with minimum effort Sturdy Construction, easy to assemble and Install MOC - WCB, CF8, CF81X, CF3, CF3M, WGC, wCG, Class II 400 & Class #8
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • PT RATING0103, ISO 15156 PT RATING ASME B16.34
    • DESIGNAPI 608, ISO 17292, API 6D
    • FACE TO FACEAPI 6D, ASME B16.10, MFG. STD
    • END CONNECTIONASME B16.5, ASME B16.25, ISO 7005, EN 1092, ASME B16.24, ANSI B16.1
    • FIRE TESTAPI 6FA / API 607 / BS 6755 PART-2
    • TESTINGAPI 6D, API 598 / EN 12266 / BS 6755 PART-1
    • NACE COMPLIANCENACE MR 0175 / 0103, ISO 15156
    ...more
  • Hastelloy C276/B3 Floating Ball Valve

    Hastelloy C276/B3 Floating Ball Valve

    Get Price Quote

    • TypeFloating Ball Valve
    • Seat MaterialPTFE,RPTFE,PPL
    • Seal MaterialPTFE,RPTFE,PPL
    • Nominal PressurePN1.0 To 10MPa, Class150 To Class600
    • We offer a high-quality Hastelloy C276/B3 Floating Ball Valve designed for optimal performance. This Type - Floating Ball Valve features Seat Material - PTFE and Seal Material - PTFE, ensuring reliable and leak-free operation. With a Nominal Pressure range of PN1.0 to 10MPa, this valve is suitable for various industrial applications. As a trusted Manufacturer, we provide top-notch products that meet industry standards and deliver exceptional value. Invest in our Floating Ball Valve for superior performance and durability in your operations.
    ...more
  • Floating Balls

    Floating Balls

    Get Price Quote

    • ApplicationHeating Process,Energy Saving
    • Size1
    • MaterialStainless Steel (S.S) And Mild Steel (M.S)
    • Number Of FlowerHeating Material
    • CoatingPowder Coating, Chrome, Nickel
    • Target AudienceIIT Students
    • Special FeatureFloats In Heating Process
    • Floating balls are used in the heating process of the material. Due to floating balls Heat will not transfer into the climate. So save the energy in the heat process. We make from S.S and M.S material with different types of coating like the powder coating, Chrome, Nickel, etc. Size from 1” to 16” Size. It can be used by IIT Student for some operation.
    ...more
  • Floating Ball Valves

    Floating Ball Valves

    Get Price Quote

    • Body StyleSingle Piece
    • PortsReduce Port
    • Size Range¼ “ to 2” (6mm to 50mm)
    • Temperature205° C (400° F)
    • Pr. RatingPN 10
    • End ConnectionBSP / NPT
    • We are offering Floating Ball Valves
  • FEP / Pfa Lined Floating Ball Valve Flanged

    FEP / Pfa Lined Floating Ball Valve Flanged

    7,000 / nos

    • Brand NameNtork
    • Features Economical Solution All wetted parts completely lined with Non permeable high grade virgin FEP / PFA Direct actuator mounting with out use of adaptor for longer lasting performance Successfully used in Hydrochloric Acid, Phosphoric Acid, Nitric Acid, Sulfuric Acid, Acetic Acid, Sea Water, Clorine, Bromine, Brine Dove tail bonding grooves for superior bonding on FEP / PFA resisting shrinkage and collapse. MOC : WCB / CF8 / CF8M / CF3M (ASTM A 351 Gr.) Cast Iron / S. G. Iron / Ductile Iron / Duplex / Hast Alloys Size : 1/2" to 8" Pressure : Upto 8 Kgs/cm2 Temperature : FEP : Upto 180 °C / PFA : Upto 230 °C Ends : Flanged 150# Single source manufacturing and supplying of Actuator, Accessories & Automation Parts
    ...more
    www
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • Design1, 2, & 3 Piece RB & FB
    • Sizes - mm15 to 300
    • MaterialsA105, C.I., WCB, LCB,CF8, CF8M, CF3, CF3M,
    • LF2, F304, F316, and other alloys Seats
    • PTFE, CFT, GFT, RPTFE, nylon,PEEK, and metalEnds
    • SE, SWE, and FEFeatures
    • Fire safe, Non Fire Safe and antistaticBlow out proof stem.
    •   In order to append and respond to the diverse demands of clients, we are able to offer Floating Ball Valve. Creating a niche of BALL VALVE such as Floating Ball Valves, Trunnion Mounted Ball Valve, Steam Extension Ball Valve, Cryogenic Ball Valve, Forged Brass Ball Valve, Bronze Ball Valve and many more items at its best, with utmost quality.
    ...more
  • Floating Ball Valves

    Floating Ball Valves

    Get Price Quote

    • FeatureAnti Blowout design, Fire Safe & Normal Application
    • Material of ConstructionForged and Cast Carbon Steel and Stainless Steel
    • L&T Ball Valves are available in single-piece, two-piece and three-piece constructions. In these valves, line pressure forces the floating ball against the downstream seat to effect bubble-tight sealing. Blowout Proof Stem. The side-entry stem of L&T Ball Valves has a shoulder that bears against a matching shoulder in the body to make it blowout proof - the higher the line pressure, the better the sealing to atmosphere. High Integrity Stem Sealing. Sealing to atmosphere is further enhanced by stem thrust seals and stem packing rings. To compensate for wear and thermal expansions, Belleville springs are used. Mirror-finished Solid Stainless Steel Balls. To obtain bubble-tight sealing and lower operating torques, mirror-finished SS balls are used as a standard. The solid construction of the balls guarantees higher structural strength. Seats with Pressure-relieving Slots. Seats with fine grain structure are used to ensure better strength and longer life. Pressure-relieving slots are a unique feature of L&T Ball Valves. The slots relieve upstream pressure when the valve is in closed position and prevent seat damage. Actuator Mounting Flange. L&T single-piece and two-piece Ball Valves are provided with an integral actuator mounting flange conforming to ISO 5211. Please note that full bore valves in sizes DN 15 to DN 25 would be supplied with mounting arrangement as per L&T's manufacturing standard. Fire-Safe Feature. L&T fire-safe Ball Valves feature secondary metal seats. In the event of a fire, after the soft-seat totally sublimates, the ball moves and abuts the downstream metal seat to form a leak-tight seal. Cavity Pressure Relief Mechanism. A slight increase in temperature of fluid entrapped in ball cavity can cause a rapid increase of pressure and damage the ball and seats. To prevent this, L&T Ball Valves are equipped with automatic cavity relief mechanisms. When the valve is in open position, a hole provided on the ball connects the body cavity to the ball port and thereby ensure that cavity pressure does not build up. In the closed condition, when the cavity pressure rises above a designated level, the seat lip deflects to relieve pressure to the upstream side. Antistatic Feature. Static electricity builds up inside a valve when the ball rubs against non-metallic seats. This is a fire hazard, especially in flammable fluid pipelines. L&T Ball Valves have inbuilt antistatic mechanisms to provide electrical continuity. Stems of full bore valves of size 65 mm and above and regular bore valves of size 80 mm and above are equipped with spring-loaded plungers. In valves of smaller sizes, electrical continuity is achieved by using Carbon-filled PTFE thrust seal and graphite stem packings. On-line Service. Three-piece Ball Valves are designed for easy on-line service. To access the valve internals, remove three connector bolts and swing the body out using the fourth bolt as a pivot.
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • Usageindustrial
    • TypeFloating Ball Valve
    • DesignFloating Ball Design
    • PerformanceReliable And Efficient
    • Flow ControlEfficient Flow Control
    • Reliable and Efficient Floating Ball Valves for Industrial Applications floating ball valve is a versatile solution known for its reliable performance and efficient flow control. With a floating ball design, it allows the ball to move freely, ensuring tight sealing and reduced torque requirements. Ideal for various industries such as oil and gas, chemical and water treatment, the floating ball valve offers excellent shut-off capabilities, low-pressure drop and ease of maintenance. Its wide range of material options, sizes and pressure ratings make it suitable for diverse applications, providing reliable and cost-effective valve solutions.
    ...more
  • Ball Valve FLOATING

    Ball Valve FLOATING

    200 - 20,000 /

    • Size1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5, UPTO 750MM
    • Number Of FlowerFlanged Ball Valve
    • MaterialCarbon Steeel, Cast Iron, Stainless Steel, UPVC
    • CertificationISO 9001:2008 Certified
    • ApplicationGas Fitting, Oil Fitting, Water Fitting
    • Packaging TypeDEPAN ON MOC
    • FeatureBlow-Out-Proof
    • TechnicsGear Operated, Hard Sealing
    • PowerHydraulic, Manual
    • PressureTriple Offset Butterfly Valve
    • Brand NameMARCK
    • Temperature Of MediaGAS, OIL WATER
    • ball valve: api-6d/bs-5351/bs5159/iso 17292 material of construction: ci/cs/ss/as/ a105/f304/ f316/cf3/cf3m/cn7m seat & seals: ptfe/ graphoil / graphite end connection: screwed / socketweld/ buttweld/ flanged pressur rating: (class) 150#/300#/600/800#/900# type: single pc/ two pc/ three pc/ 3 way/ 4 way operation: liver/gear/electrical actuator / pneumatic rotery actuator .
    ...more
  • Floating Ball Valves

    Floating Ball Valves

    Get Price Quote

    • End ConnectionsVarious End Connections Available
    • MaterialStainless Steel,PTFE
    • Bore DesignsFull-bore,Regular-bore
    • Compliance StandardsAPI 6D,API 608,ISO 17292
    • We manufacture a versatile range of process ball valves in single, two, and three-piece constructions. The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. The floating ball design of ball valves is the universal choice for most process and utility applications. In this design, sealing takes place by allowing the ball under pressure to move towards the downstream seat to effect a tight seal. Our floating ball valve design has a small cavity, making it a “no cavity ball valve” with a low pressure drop. These valves are bidirectional valves. Product Details : Floating Ball Valve design complies to API 6D, API 608, ISO 17292. Fire-safe to ISO 10497 and API 607. Mirror-finished solid stainless ball. Fine-grained PTFE seats. Cavity Pressure Relief mechanism.
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • MOQ20 Piece
    • TypeFloating Ball Valve
    • MaterialStainless Steel
    • ColorSilver
    • Size2 Inches
    • End ConnectionsFlanged
    • Pressure Rating1500 PSI
    • Suitable ForWater And Gas
    • Temperature RangeUp To 400°F
    • We offer a high-quality Stainless Steel Floating Ball Valve with a 2-inch size, suitable for water and gas applications. This silver valve has a pressure rating of 1500 PSI and end connections are flanged for easy installation. With a temperature range of up to 400°F, our Floating Ball Valve is durable and reliable. Ideal for manufacturers, suppliers, and retailers looking for a dependable valve solution.
    ...more
    www
  • Cast Steel Floating Ball Valve

    Cast Steel Floating Ball Valve

    Get Price Quote

    • Port Size4 INCH
    • MaterialStainless Steel,A 216 GR WCB/CF8/CF8M
    • Pressure1500
    • Design TypeFloating Ball
    • Valve Size4 Inch
    • End ConnectionFlanged
    • Bore TypeFull Bore
    • Pressure ClassClass 600
    • TemperatureHIEGH TEMP
    • Design StandardAPI
    • Seat MaterialPTFE
    • DesignMFR
    • OperationLever
    • A floating ball valve uses a hollow, perforated ball that is not anchored but "floats" between two seats, allowing it to move slightly under pressure. When the valve is closed, the fluid pressure pushes the ball against the downstream seat, creating a tight seal. This design is simple, economical, and common in low-to-medium pressure applications across many industries, including water, oil, and gas.  Additional Information: Production Capacity: 200 Delivery Time: 1 TO 4 WEEKS Packaging Details: WOODEN
    ...more
    www
  • Stainless Steel Ball Float Valve

    Stainless Steel Ball Float Valve

    8,800 / Piece

    • MaterialStainless Steel
    • Size15mm To 300mm
    • CertificationISI Certified
    • Country of OriginIndia
    • Brand NameTeleflo
    • Surface FinishingPolished
    • Connector TypeScrewed
    • Features : Mechanism Operation Anti-abrasive & noncorrosive nature High performance Corrosion-resistance Reliable
  • Floating Ball Valve

    Floating Ball Valve

    20,000 / Piece

    • Valve Size8 Inch
    • MaterialC.I / C.S / SS 304 / SS 316
    • Size1/2" TO 12"
    • MediaIndustrial
    • PressureLow to High Pressure
    • Connector TypeScrewed End / Flanged End / Thread End / Socketweld End / Buttweld End
    • TemperatureLow to High Temperature
    • Temperature Of MediaLow Temperature, High Temperature, Medium Temperature
    • DesignFloating Ball Type Design
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    650 - 150,000 /

    • Size1/2 To 12
    • MaterialCast Iron
    • EndFlange, Thread, Socket Weld
    • Class Rating150 to 2500#
    • Automation GradeAutomatic
    • As a dependable name, based in Ahmedabad(India), we make available qualitative lot to every nook and corner ensuring maximum client satisfaction. Reckoned as outstanding Supplier & Manufacturer of Floating Ball Valve; we are a reliable choice amidst the customers. Our floating ball valves are designed with high strength, superior corrosion resistance and high surface finishing.
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • End ConnectionsFlanged End / Butt Weld End
    • UsageIndustrial, Chemical, Oil & Gas
    • Size Range15mm - 200mm
    • Class150, 300, 600
    • Design StandardBS EN ISO 17292 (BS 5351) / ASME B16.34
    • Testing StandardAPI 598 / BS EN 12266-1
    • Face To FaceASME B16.10
    • We offer a high-quality Floating Ball Valve suitable for industrial use, featuring End Connections in Flanged End or Butt Weld End options. Available in sizes ranging from 15mm to 200mm and Class 150 rating, our valves adhere to Design Standards BS EN ISO 17292 (BS 5351) or ASME B16.34. They are tested according to API 598 or BS EN 12266-1 standards, ensuring reliability and performance. With Face To Face dimensions meeting ASME B16.10 standards, our valves are ideal for various industrial applications. As a trusted Manufacturer, we provide top-notch valves that meet stringent quality and performance requirements.
    ...more
  • Floating Ball Valves

    Floating Ball Valves

    Get Price Quote

    • MaterialVariety Of Materials
    • End ConnectionsVariety Of End Connections
    • Sealing MechanismFloating Ball Design
    • Seal EffectBall Moves Towards Downstream Seat For Tight Seal
    • We manufacture a versatile range of process ball valves in single, two, and three-piece constructions. The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. The floating ball design of ball valves is the universal choice for most process and utility applications. In this design, sealing takes place by allowing the ball under pressure to move towards the downstream seat to effect a tight seal. Our floating ball valve design has a small cavity, making it a “no cavity ball valve” with a low pressure drop. These valves are bidirectional valves.
    ...more
  • Flush Tank Float Ball

    Flush Tank Float Ball

    10 - 20 / piece

    • MOQ100 piece
    • MaterialPVC
    • ApplicationFlush Tank
    • SizeStandard
    • FeatureBlow-Out-Proof, Casting Approved, Durable
    • Country of OriginIndia
    ...more
  • Ball Float Valve

    Ball Float Valve

    Get Price Quote

    • MaterialMild Steel
    • Size15 Mm To 80 Mm
    • Corrosion ResistanceYes
    • FinishPolished
    • Packing TypeBox
    ...more
  • Floating Ball Valve

    Floating Ball Valve

    Get Price Quote

    • MaterialCarbon steel, PTFE/Nylon, Stainless Steel
    • Conformal StandardsANSI / ASTM, IEC/EN 62305, BS EN 50468, IEC 62561, UNE 21186
    • Face to face (end to end)ANSI B16.10, API 6D
    • Flanged connection2″
    • Fire-safeAPI 607, API 6FA
    • Test and inspectionAPI 598, API 6D
    • Butt welded endANSI B16.25
    • Features: Bolted bonnet, Two-piece Body, Floating Ball. Full or Reduced bore, Blowout Proof Stem. Fire safe and Anti-static. Stainless steel ball. Floating ball valve seat sealing design. Reliable inverted seal the valve rod closures. Fire electrostatic function, Automatic pressure relief. Locking devices such as structural features. Application: Suitable for chemical, petroleum, natural gas, metallurgy and other industries and containing H2S, impurities, corrosion serious long distance gas pipelines. For grease or sealant injection, both on the stem and the seat. On the Pipe, it is mainly used to cut, distribution, and change the direction of medium flow.
    ...more
  • Floating Ball Valves

    Floating Ball Valves

    Get Price Quote

    • TypeFloating Ball Valve
    • Size1/2 Inch, 3/4 Inch, 1 Inch
    • Pressure RatingLow To Midlevel Pressure
    • DesignFloating Ball
    • A Floating Ball Valves is a valve with its ball floating (not fixed by a trunnion) inside the valve body; it drifts toward to the downstream side and tightly pushes against the seat under the medium pressure to ensure a reliable seal. The Floating Ball Valves is a simple design with good sealing performance relying on the seat material to withstand the workload as the sealing pressure is barred by the seat ring. Floating Ball Valves are mainly used in low to midlevel pressure applications.
    ...more
Filter by City
top