Forming Presses Dealers

The books are pressed immediately after casing-in and the joint is burnt-in at the same time. Pressure and the temperature of the joint bars can be adapted to the binding materials. therefor the joint is formated extremely well and receives a perfect and permanent shape.

We manufacture high quality hydraulic preforming press of two types: 4 pillar type preforming press and C-frame type preforming press. Our machines are specially designed for preforming of carbon powder for brake lining, disk pads brake shoes, briquette pallets industries, compacting preforming and manufacturing non-ferrous, iron based, anti friction powder components. All these machines are compact, high speed and effective.

Pressing of cased-in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Spine of Book-Blocks. These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300400kgs to achieve the desired results. The bars (Joint Formers) are supplied for Flat and Rounded Spine Book-backs respectively. Temperature of the Joint Formers is set through Digital Temperature Controller (PID) to suit properties of Glue (Adhesive), Binding material and operating speed. The PLC (Programmable Logic Controller) enables choice of single or multiple strokes for accurate control of burning-in the Joints and consistent results. Counter on PLC indicates number of books processed at the end of each cycle. The system automatically releases the book on completion of the set timing cycle. Back-gauge (setting handle mounted on the front panel) is provided for faster make-ready production; Light Guide indicates the Joint Forming position and also reduces the make-ready time. Specially designed operator Safety Device in addition to Emergency Switch incorporated. Provision for Joint Forming of foam padded cases available. PLC based control panel for optimum reliability and simplified diagnostics. Press equipped with Castors for maximum space saving utilisation.

We offer Automatic Forming Hydraulic Press for forming maximum 600 tons and in higher capacities as per customer requirements. These presses are made out of tested materials, press frame made out of tested ms plates, stress relieved after fabrication and machined for accuracy, hydraulic cylinders are made out of tested ms seamless pipes, ram is made out of carbon steels, imported seals are used in the hydraulic cylinder reputed make hydraulic pumps and valves are used in the hydraulic system, shell and tube heat exchanger is provided in the hydraulic system to avoid temperature rise of hydraulic oil.

Pressing of cased-in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Spine of Book-Blocks. These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300/400kgs to achieve the desired results. The bars (Joint Formers) are supplied for Flat and Rounded Spine Book-backs respectively.Temperature of the Joint Formers is set through Digital Temperature Controller (PID) to suit properties of Glue (Adhesive), Binding material and operating speed. The PLC (Programmable Logic Controller) enables choice of single or multiple stroke/s for accurate control of burning-in the Joints and consistent results. Counter on PLC indicates number of books processed at the end of each cycle. The system automatically releases the book on completion of the set timing cycle. Back-gauge (setting handle mounted on the front panel) is provided for faster make-ready / production; Light Guide indicates the Joint Forming position and also reduces the make-ready time. Specially designed operator Safety Device in addition to Emergency Switch incorporated.Provision for Joint Forming of foam padded cases available.PLC based control panel for optimum reliability and simplified diagnostics. Press equipped with Castors for maximum space saving / utilisation.

Electropneumatics’ presses for metal forming are available in different constructions and with a wide variety of features for applications such as deep drawing, stamping, trimming, cold extrusion, coining, hemming, blanking, press fitting and riveting, etc. We offer hydraulic and mechanical presses with servo drive options (hydraulic or electric). We can provide all the features and levels of sophistication and automation to meet the varied requirements of forming different materials (such as mild steel, aluminium, high strength steel, alloy steels, etc.), part intricacies and cycle times.

Industrial Metal Forming Presses, Cold Metal Forming Presse

Metal Forming Presses, Cutting Tools, Metal Cutting Ban

Metal Forming Presses, Hydraulic Presses, Rubber Moulding Presse

Metal Forming Presse

Hydraulic Forming Press, Pneumatic System

Metal Forming Presse

we manufacture and supply a vast range of hydraulic forming presses. these presses are highly robust in construction, durable, corrosion resistance and gives high performance. hydraulic forming presses are generally used for making of aluminum and stainless steel products against rubber pads. specification: * it consists eight point long slide guide for perfect guiding with centralize lubrication system water cooled heat exchanger and plc control * these presses are equipped with rubber tool bolster * it has advanced hydro electronic controls capacity: up to 4000 ton.

Metal Forming Presses, Tube End Forming Machine, Seamless Honed Tube

Metal Forming Presses, Hydraulic Booste

Hydraulic Forming Press, Transfer Molding Press, Standard Assembly Pres

We manufacture and supply a vast range of hydraulic forming presses. These presses are highly robust in construction, durable, corrosion resistance and gives high performance. Hydraulic forming presses are generally used for making of aluminum and stainless steel products against rubber pads. specification: * it consists eight point long slide guide for perfect guiding with centralize lubrication system water cooled heat exchanger and plc control * these presses are equipped with rubber tool bolster * it has advanced hydro electronic controls * capacity: up to 4000 ton.

Electropneumatics' presses for metal forming are available in different constructions and with a wide variety of features for applications such as deep drawing, stamping, trimming, cold extrusion, coining, hemming, blanking, press fitting and riveting, etc.

Metal Forming Presses, Metal Lathe, Gap Bed Lathes, Metal Spinning Lath

Hydraulic Forming Press, Milling Machines, Forging Press, Pneumatic Presse

Hydraulic Forming Press, Rotary Sand Coolers, Fettling Equipmen

Hydraulic Cold Forming Press, Deep Draw Hydraulic Pres

Hydraulic Forming Pres

Hydraulic Forming Press, Compression Molding Hydraulic Pres

Metal Forming Press, Hydraulic Swaging Machin

we offer hydraulic metal forming presses. electropneumatics presses for metal forming are available in different constructions and with a wide variety of features for applications such as deep drawing, stamping, trimming, cold extrusion, coining, hemming, blanking, press fitting and riveting, etc. we offer hydraulic and mechanical presses with servo drive options (hydraulic or electric). we can provide all the features and levels of sophistication and automation to meet the varied requirements of forming different materials (such as mild steel, aluminium, high strength steel, alloy steels, etc.), part intricacies and cycle times. available as single, double or triple action presses in c-frame, h-frame, 4-pillar, ring frame, straight-sided, 4-column constructions torsion and deflection resistant, rigid fabricated press structures, optimized at design stage and manufactured to high quality standards 1. accurate, lubricated slide guiding arrangements and pre-stretched tie-rod arrangement in column presses. 2. various die cushion options like conventional, active, multi-point, etc., programmable to suit application. 3.powered by high-performance hydraulic systems with conventional, proportional and servo controls. 4. provided with necessary safety features and on-line monitoring systems. optional features that can be provided are die cushions ejectors blank holder mechanical knock-outs shock absorbers quick die change systems coil feed lines transfer systems loaders, unloaders, rotarylinear tables, etc. electropneumatics� user-friendly relay logicplccnc controls with advanced diagnostic capabilities for process optimisation and sequence setting

Hydraulic Forming Press, Pipe Bending Machines, Toggle Clamps, Pipe Fitting