Fuel System Dealers

This is a unique modular constructed organic fuel system which works on the principle of a biological reaction process involving use of specifically and finely cultured microbial ecosystem for aerobic and an-aerobic digestion of organic feedstock.

This system is suitable to control the fuel (diesel) temperature within the range of +40 oC to +45 oC (6 oC higher than cooling tower water temperature) throughout the test, at the engine inlet. For lower temperature range chiller is provided. Fuel from the in-cell tank is passed through a heat exchanger, which is made of SS sheet metal.  The water controlled at specific desired temperature is used to remove heat from fuel flowing through the heat exchanger. It is observed that the temperature of fuel is maintained with ± 1 oC. The system comprises:Digital Temperature Indicating Controller For HeaterA heaterBosch Fuel PumpAir Separator A sight flow indicator is provided in the fuel circuit for visual flow indication. Following Auto functions are provided: Auto priming module for fuel Auto venting valve with interlock Auto fuel draining (Suction type)

We are counted among the eminent manufacturers, suppliers, traders and exporters of high grade Fuel Handling System. Our highly experienced engineers manufacture these systems using optimum quality material and components that are sourced from reliable vendors. To meet the varied requirements of clients, we offer these systems in a spectrum of specifications. FEATURES: Reliable operations Minimal maintenance Longer service life

The fuel processing and handling, offered by AEGIS, is used for preparation of coalligniteagro fuels to be used as a fuel in FBC Boilers, Hot Air Generators (Heaters) and other multi fuel fired systems in various industries. The fuel processing is used to produce fuel of right size suitable as per the specification of the FBC BoilersHeaters. We at AEGIS are capable of conceptualizing, designing, engineering, assembling and installing of custom fuel handling systems thereby acting as a full-service solutions provider.The entire system is conceptualized based on parameters such as fuel to be handled, capacity required, availability of space, processing required, economical considerations, etc. Following are some of the typical fuel handling systems supplied to various clients for handling various fuels.

Powertech has created a fuel sensor (FMS), which digitally senses the fuel level as the level increases or decreases. Its accuracy level is high due to change in fuel level causes change in count of sensor. These counters are enclosed in noncorrosive pole and they are dipped in the Diesel tank. Noncorrosive pole helps in weather proofing, prevents the wearandtear of sensor. Due to temperature inside Diesel tank is lower than outer area, the performance of sensor become double fold. Sensor’s shape makes it easier to mount. Its different design helps in reducing human error and attempt of tempering reduces as well. Mounting seal assist in reorganization any attempt of damaging the sensor or theft. Inbuilt regulate power supply will provide the constant power supply to system, which minimize the chances of fluctuation in reading. Fuel level sensor enables us to avoid situation like Site being down due to DG couldn’t run! Fuel was low! With Continuous Fuel level sensing, you will have enough time to refill and avoid being in that type of putdown condition. Fuel consumption can be monitored with its change in level with DG run, Also the fuel theft can be stopped at some extend. With Fuel level monitoring you will have proper accounting of fuel refill, fuel consumption and DG set performance. You will also have got to know about that extra amount of Fuel getting disappear everyday without any accounting! The Benefits ¾ Timely Information of Top up & drain ¾ Daily fuel consumption analysis ¾ Fuel theft can be ceased ¾ It also helps to avoid situations like site down due to low fuel in DG.

Wesman's standard assembled Gas Train is supplied either for inlet gas pressure of 1 bar, 2 bar or 4 bar. The gas train is compiled with safety system and constant pressure regulating system as per universal safety regulation. - Standard gas train range up to 585 Nm3hr Natural Gas flow. - Special gas train ranges up to 2000 Nm3hr Natural Gas flow. - Constant gas pressure regulation required for burner application. - Safety Valve to protect the downstream equipments in case of any abnormality. - Mechanical Relief Valve to vent out the over pressurized gas to safe the system. - Block and bleed valve with pressure switches for safe operation.

With the rapid change on Road Transport industry, the volume of vehicles is expanding in the quick pace. In this manner is the requirement for operations administration of fleet and counteractive action of Fuel burglaries, as the fuel emerges to be the costliest segment of the transport business.

We are ranked amongst the credible Manufacturers and Suppliers of Diesel Engine Fuel Supply System based in Ambala, Haryana. Our Diesel Supply System consists of original parts including diesel tank, Filter, Fuel injector pump and atomizer. We check the system on stringent quality parameters before delivery to ensure customer satisfaction. We are proficient in delivering any order of Diesel Engine Fuel Supply System to any part of the country.

The system polishes diesel fuel in storage tanks, as it is dispensed or after it has been sitting unused in an enginebelly tank for an extended period. The compact, lightweight Cart can be maneuvered and operated by one person. Lightweight and designed with truck skids for easy loading Runs unattended and alerts for maintenance More compact than other carts with comparable flow rates and fits through building doorways Removes water and bacterial growth detrimental to pumps and injectors

Interested buyers can contact us anytime for placing orders; we ensure timely delivery of the same. To ensure quality of the products, we conduct diverse quality tests at all stages and thus our products are quality assured.

The Variable Speed Governor (VSG), an innovative product from MSG’s R&D is a product as a result of end user feedback on needs for automatic multiple speed adaptation in the same product for different speed zones (City Highway etc.). Using the VTS, the vehicle can be tracked anywhere in India world. The product is fully compatible with the MSG Electronic Speed Governor thus delivering the benefits of Speed Control, Variable Speed Control & Vehicle Tracking.

Boiler Construction is Three Pass Fully Wet Back Type. Designed with proper grate area and furnace volume for efficient burning of solid fuels. Proper Furnace Volume is provided For Liquid and Gaseous Fuels for better Combustion Efficiencies.. Higher boiler efficiencies as designed properly with required heating surface areas based on Fuel Type. Available for liquid fuels like LDO/HSD/FO/LSHS, Gaseous fuels like Natural Gas/LPG/Biogas and Solid Fuels like Bagasse, Husk, Wood, Coal and other Agro-Wastes. Consistent and trouble free performance under ‘Normal Operating Conditions’. Capacities from 1,00,000 kcal/hr to 100,00,000 kcal/hr with Maximum Water Temperatures of 230 deg.C.

We are offering fuel handling system. fuel handling system is manufactured, exported and supplied by us using high grade components. Fuel handling system comprises of gas train and fuel oil heating & pumping unit. Our fuel handling system is in compliance with the highest quality standards and is extensively serving numerous applications. Fuel handling system offered by us is very efficient and offers very smooth operations. gas train specifications flow : 10 m3/ hr to 600 m3/ hrfuel : lpg / natural gas / producer gas / bio-gas / propanesize : 1/2 inch to 3 inchworking pressure : 10 mbar to 20 bar fuel oil heating & pumping unit's specifications flow : 5 kg/ hr to 800 kg/ hrfuel : heavy oil / furnace oil / ldo / lshs / dieselsize :1/2 inch to 3 inchworking pressure : 2 bar to 30 bar