Guillotine Damper Dealers

IAFIPL Pulse Jet Bag Filter (MODULAR) offer excellent filtration efficiency for a wide variety of process dust and fume control systems. This filter is a rectangular bodied pulse jet cleaned filter unit comprising of section modules designed to handle high air volumes up to 20,00,000m3hr, dependent on the material being filtered. The product is designed for applications where the footprint is limited, as bags are removed vertically from the top clean section rather than from the side via hinged opening access doors. It is also ideal for hazardous dusts, since no access is required into the dirty side of the filter during bag changing

Guillotine (Isolation) Damper is tailor made equipment used in Cement, Steel & Power. These Dampers are mainly used at locations such as PASA ducts in Boilers, IneltOutlet of ESP, InletOutlet of ID Fans and wherever high leaktightness required. Available in range ; 700 MM DIASQ to 7500 MM DIASQ.

Industrial Fans India offers a complete range of heavy duty guillotine dampers to meet customers' requirements. We have installed guillotine dampers in sizes as large as 5100mm dia. Guillotine dampers are being used for shut-off of dust laden flue gas volumes. The material of construction of blade and housing is carefully selected to meet specific operating condition and to withstand heat stresses, fatigue, corrosion, and distortion. We have proven reliable designs in some of the most demanding thermal environments such as the Gas turbine outlet, and high corrosion environments such as coal fired power plants. The damper blade with its grid support structure is designed in such a way that it can only distort minimal when exposed to high temperatures. The heart of our Guillotine damper is a proven and robust Rack & Pinion design. The design of the rack and pinion system has been specially to make it suitable for very high temperature and severe dust loads in the flue gas. It is operated by an electric actuator in conjunction with rack and pinion systems engaging it on each side, which ensures a parallel blade movement.

We are offering Guillotine Dampers. guillotines employ a sliding blade inserted into the duct from an external frame to block flow in rectangular and round ducting. guillotines provide a mechanized means of inserting a duct blanking plate and offer superior isolation of flue gas applications containing heavy particulate loads and are ideal for tight shut off applications. applications : * scrubbers * precipitators * oxidizers * bag houses * heaters miteck performance advantages :: * low pressure drop due to full blade retraction from flow stream * dual chain or rack and pinion drive designed for actuator maximum stall output * reliable man safe isolation with optional seal air system standard design features * self cleaning blade seats for 99.99% sealing efficiency * self lubricated sleeve bearings * maintenance-free drive design * corrosion resistant drive and follower shafts * clean out access * actuator is directly coupled to the drive shaft options * push rod/chest style for high temperature or pressure * spectacle designs * enclosed bonnets * dual blade * seal air systems * position indicators.

Keeping in mind the ever-evolving needs of our clients, we are offering to our valuable clients the premium quality Guillotine Damper Design. Offered service is widely cherished among our clients due to its perfect execution and high reliability. The provided service is imparted by our deft professionals using the best grade tools and the sophisticated technology. Apart from this, the provided service can be availed for our prestigious clients at pocket-friendly prices.

IFI guillotine damper, has the main function of isolation of equipment to permit inspection, maintenance, or repair in addition to process isolation. Occasionally, guillotine dampers are specified for bypass ducts, if operation requirements allow enough time for the slow-moving blade to travel across the opening. The standard guillotine model is designed forassembly to be performed in such a way that the gate slides vertically. The guillotine damper is made up of a gate whichslides along metal guides, closing the conduitcompletely. The ends are joined to the conduits bymeans of flanges. The guillotine damper isnormally supplied as a single part. The body of the guillotine damper can beinsulated externally depending upon application requirements.

The basic mechanical elements of the guillotine damper are a blade, a peripheral-seal system to prevent gas leakage at all stages of blade movement, support members for the blade , and a drive to move the blade steadily and continuously from open toclose and back again.Where flow control is not required but positive shut off is mandatory, guillotine dampersare the most logical choice.

  These types of dampers are mainly used for isolation of equipment to permit inspection, maintenance or repair in addition to process isolation. They are generally rack-pinion/ screw or chain type. Screw type design is available in rising or non-rising movement. Where available space is constraint than non rising design is recommended.  

Guillotine Damper are most commonly specified when isolation is the primary function of the damper. Guillotine dampers are best-suited for isolation applications where low leakage and pressure drop are important Guillotine dampers and blanking plates can be used in any application where a positive isolation is required for routine maintenance and entry to a duct behind a media source. Guillotines are classified in two styles - Low Leak and Zero Leak. Both styles are ideal for a high degree of isolation while providing low pressure drop when the dampers are in the open position. The basic mechanical elements of the guillotine damper are a blade, a peripheral - seal system to prevent gas leakage at all stages of blade movement, support members for the blade, and a drive to move the blade steadily and continuously from open to closed and back again.Design Features : Type - Rectangular / Round Flanges standard   - As per customer requirement Available size - 100mm to 5000mm Material of Construction : Body - MS IS 2062 / Stainless Steel AISI 304 / 316 / 310 Gate - MS IS 2062 / Stainless Steel AISI 304 / 316 / 310 Gland - MS IS 2062 / Stainless Steel AISI 304 / 316 / 310 Shaft - EN 8 / SS AISI 410 / 304 / 316 Mode of Operation : Geared hand wheel Electrical actuator Pneumatic actuator / cylinder Applications : Cement plants Power plants Sugar industries Pulp and paper industries Water and sewage plants

A safety dilution damper is provided to safe guard the fabric media before the bag house for temperature rise. This damper will be normally closed during normal operation. However it will be open at predetermined set point from the temperature detector located before the bag house. Fresh air will be introduced from the atmosphere and keep the temperature of gases well below the limit. Once the designed system temperature is attained, again at predetermined set point the damper will be closed automatically.

These types of dampers are mainly used for isolation of equipment to permit inspection, maintenance or repair in addition to process isolation. They are generally rack-pinion screw or chain type. Screw type design is available in rising or non-rising movement. Where available space is constraint than non-rising design is recommended.

Guillotine Damper, Steam Injector, Casing Centralize

Guillotine Dampers, Air Slides, Industrial Guillotine Damper, Shock Absorber

Guillotine Dampers, Material Handling Equipment, Air Control Equipmen

Guillotine Damper, Butterfly Dampers, Multi Louver Damper

Guillotine Damper, Screen Basket, Ring Adapters, Tower Packin

Guillotine Damper, Industrial Damper, Butterfly Damper, Louver Dampe

Guillotine Dampers, Butterfly Dampers, Industrial Diverte

Guillotine Dampers, 3 Way Diverter, Rotary Airlock Valve

Guillotine Damper, Spring Plunger, Ring Adapter, Tube Diffusers, Sieve Tra

Guillotine Damper, Wear Resistant Liners, Screen Basket, Pin Plat

Guillotine Damper, Bag Filters, Blowers, Ceiling Fans, Dust Collector