Industrial Dampers Dealers

These dampers/gravity louvers are majorly used in exhaust air and to control back draft in ducts. They are available in both Galvanized Steel and Aluminum. Other Information Pay Mode Terms: T/T (Bank Transfer)

we are engaged in offering a wide range of Dampers that is widely used in chemical, hotel, cement and pottery industries. Owing to its amazing quality, the offered damper is used for proper control of the airflow for good quality efficiency. This damper is manufactured by our veteran professionals using first-class quality raw material and progressive technology. Besides this, we test out that damper on a range of quality parameters to send an unblemished dispatch from our end.

The company is the well known Manufacturer, Exporter, and Supplier of Industrial Dampers in India. Available in a wide range, our Industrial Dampers are highly demanded in national as well as international markets. These Industrial Dampers are made up of the finest materials that impart longer life and higher efficiency. Our Industrial Dampers are offered at reasonable prices. We Offer : Circular DampersRectangular DampersGuillotine Dampers

We manufacture dampers, vibration controllers, shocks and structure borne noise for engineering industry, including marine and military applications. our standard range includes: • pur & rubber spring • pneumatic dampers • machine mounts • metal dampers • cup mounts • elastomeric dampers • metal bonded rubber pads for side barer • high capacity buffer spring • sandwich mounting (loco) • sandwich mounting for (emu) • megi side bearer spring • secondary rubber spring (loco) • elastic engine suspension • chevron spring • damper pads • suspension pads • resilient mounting pads • lower & upper washer dampers • thermoplastic polyurethane spring pads • shim for coil spring • rubber pads for suspension support • anti vibration pads • rubber spring pads • rubber buffer materials: natural rubber (nr), nitrile (nbr), hydrogenated nitrile (hnbr), styrene – butadiene rubber (sbr), polyacrylate (acm), fluorocarbon (fkm), per-fluorocarbon (ffkm), ethylene propylene (epdm), silicone (vmq), fluorosilicone (fvmq), polyurethane (pu), polytetrafluoroethylene (ptfe), thermoplastic polyurethane (tpu). We can design, develop, execute import substitute and make any tailor made product as per customer design, specification, and drawing.

Industrial Fans India offers a complete range of heavy-duty butterfly and louver dampers to meet your requirements. We have installed butterfly dampers as small as 100 mm diameter to as large as 3100mm diameter and louver damper of maximum size 3750mm height x 16000 mm wide. Our dampers are working in some of the harshest environments where abrasion, corrosion and heavy dust loading are prevalent. Butterfly dampers are not as precise as louver dampers for flow control but can be used for modulation when precise control is not critical. For more accurate flow control applications, multi-blade louver dampers, radial vane damper can be used. Simple louver dampers, double louver dampers and tandem louver dampers are used for shutting off and regulating flue gas flows. These are designed in circular or rectangular form according to the requirement.

We are a prevalent Manufacturer and Supplier of Bypass Damper in Maharashtra, India. The bypass damper is used in between heat exchanger and bag filter. If the gas is not suitable to go into the bag filter for any cause, then there must be a way to put the gas out to the chimney, to protect the filter bags. Because the filter bags are made to persist a certain temperature, if that exceeds, the bags may get damaged. The suitability of the gas depends on the temperature of the gas. If the gas becomes low or high from a certain temperature then we use the bypass damper to bypass the gas.

GANDHI ENGINEERING CO An ISO 9001-2008 company manufacture high sealing Efficiency Dampers (Sealing Exceed 99.99%)In Circular, Rectangular &Multilovers Guillotine,divertor etc .Various Blade opening types like Parallel Blade, Opposed blade, Butterfly valve type, single blade, wing blade, Poppet type &Slide gate type, Dampers are available to suite various service application. Materials of construction for Dampers Are varying from carbon steel to stainless steels in various grades, High Ni alloys etc

We are instrumental in offering our clients with an industrially verified assortment of industrial dampers. These industrial dampers are widely appreciated for their work efficiency and cost effectiveness. Customized as per the demands of our clients, these dampeners are available in the following types: Multivane VIV Butterfly with Electrically & pneumatically actuated

A duct damper is a device used within a heating, ventilation and air conditioning (HVAC) duct. These ducts carry air from furnace or air conditioning units to the different rooms within the building. A duct damper can help control the flow of this air, or can even prevent the air from entering specified areas. By regulating air flow, the duct damper can be used to control temperature and humidity levels, restrict the flow of dangerous fumes or smoke, or simply give homeowners more control over comfort levels and drafts. These dampers can take a number of different forms depending on the desired function. A duct damper may contain a rotating flapper-type mechanism, which will pivot back and forth within the duct to control air flow. It may also contain a louver or vent-type mechanism, which can slow or redirect air flow, but is ineffective at blocking airflow completely. Finally, guillotine dampers are designed to block the entire duct so that air is unable to enter a specific area. There are two basic types of duct damper models. Volume air dampers control overall air flow as part of the building�s heating and cooling system. As the thermostat is adjusted, the dampers automatically activate to increase or decrease air flow. They can also be used to redirect conditioned air out of closed-off rooms, which prevents wasted energy.-Volume control Damper, Fire & Smoke Dampers .

Application For pressure relief applications upto airvelocities of 10 m/sec in air-conditioning, ventilating systems. Used for room to room pressure control or a basic non-return valves. Mounting Mounted on unit mouths and ducts or on the valves by using bolt and nut systems. Implementation Frames are constructed in galvanized steel and blades in galvanized and also in high grade aluminium sheets. Frames are either flanged for surface or in channel frame for sleeve. Blades are connected by means of screws or rods and bushes with the frame. All the blades are connected by a proper link arrangements to avoid noise. Available in outwards airow or in inwards airflow types. STANDARD FINISHES Galvanized steel finish or aluminium with or without powder coated.

Rudra Air Tech is the trusted Aluminium Extrusion Dampers Manufacturers in India. Established in 2013, we have quickly climbed the ladder of success owing to the unmatched quality and robust devices that we offer. Constructed using top grade aluminium, the dampers we offer are highly suitable for automatic as well as manual climate control systems. We are engaged in manufacturing, supplying and exporting finest quality dampers to our domestic and international clients. We meticulously subject our products to various tests to ensure that we adhere to all the international safety and quality norms. Smooth operations and fine finish has made us one of the most trusted Sheet Metal Dampers Manufacturers in the market. We offer customisation both in size and dimensions of the dampers to suit the particular needs of the clients. Specifically used in HVAC system, the dampers help to seamlessly linkage of frames. Our ranges of dampers are suitable for all weather conditions and deliver long lasting durability.

Types • On / Off Dampers• Butterfly Dampers• Tight Shut Off Dampers• Multiflap Dampers • Actuator Dampers• Pneumatic Dampers• Motorised DampersSizes• 100 mm To 10,000 mm • Also Can be designed as per your requirementsFeatures • Robust Design • Multiple stage flow control • Easy to operate • Easy to commissioning Material Of Construction • M. S. & S. S. Applications• Boiler Ducting • Piping• Air / Gas / Steam Flow System• Material Handling Systems

Airmake Cooling System manufactures a comprehensive range of control dampers suitable for all commercial HVAC applications, to the industry leading ultra-low leakage, premium quality airfoil control damper. Its provide an overview of the company’s line of smoke and combination fire smoke dampers. Airmake Cooling System safety dampers feature 3V or airfoil blades and electric or pneumatic actuators. All models are labeled and tested accordance, have fire resistance ratings of either 1-12 or 3 hours and leakage class ratings of I, II or III. Airmake Cooling System Experts is that contractor. Highly trained and skilled professionals qualify at a mandatory level of experience, knowledge and professionalism that is required to deal with the regulations prescribed by Life Safety Code®. Airmake Cooling System Experts provides clients with a detailed report at the conclusion of each project, invaluable when your facility is inspected by organizations such as the State Fire Marshal, The Joint Commission on Accreditation of Healthcare Organizations, insurance underwriters or other regulatory bodies. Our compliance services are in accordance with, and Underwriters Laboratories Inc. (UL), all of which require that fire and smoke dampers be inspected and are within prescribed safety norms.

Industrial Dampers are critical equipment in various places of the ducting system from the boiler to the chimney. They can be used for isolation or flow control. Different designs can be used to give 100% seal tightness for man-safe operations. Dampers are designed on the basis of: Design and Operating values of the medium temperature, pressure and flow rate Composition and nature of the medium flowing in the ductwork Dust content in the medium Special requirements with regard to installation Space availability etc. Each Damper is custom built to suit the application in question with regard to: The temperature ranging from -65°C to +1200°C Choice of material and composition Steel part and steel quality

Heavy-duty design that is suitable for applications with clean, corrosive, dirty, andor dry environments. Manufactured in-house under strict quality control procedures. IFI’s range of butterfly dampers are best suited in Duct and Ventilation system where flow control and balancing is required.

Introduction Basically classified into 3 types : Volume Control Dampers Fire Dampers Gear Dampers               Application Dampers are devices incorporated into the system to have a proper control on airflow for better maintenance of conditions and better uniformity. Construction and Functions Dampers are generally of galvanized iron make or anodized aluminium make. In order to avoid any leakage from the damper, it is provided with overlapping leafs, which can also be incorporated with compression and stop seals for more critical zones. In case of gear dampers, a specialized, lubricated gear mechanism is provided for easy and precision control. In case of fire damper, a fusible link along with a gear mechanism is provided, which shuts down the flow of air from one room to another during a fire hazard. Sizes Tailor made, as per the requirement of the design.

Our company is a prominent Manufacturer, Supplier and Exporter of Industrial Damper. The different Industrial Damper we offer includes Industrial Butterfly Dampers, Guillotine Dampers, Multi Louver Damper, and Variable Inlet Vane Dampers. Our range of Dampers is manufactured using state of the art technology and optimum quality raw materials. Clients can buy quality tested Industrial Damper at market leading prices from us.Attributes : Finds application in a large number of industrial process Quality and performance tested Manufactured using optimum quality raw material Long functional life

We are Manufacturer and Supplier of Industrial Dampers from Howrah, West Bengal. Industrial Dampers are designed and developed by using high quality raw material in accordance with set quality standards. The product range comprises Butterfly, Louver, Glutine Dampers, etc., which are widely used in industrial applications. Industrial Dampers are accessible in various configurations and customers can contact us for purchasing the same as per their demand. Highlights : Butterfly dampers, Louver and Multi-louver dampers can be supplied with internal or external fiber insulation or, when required, with internal concret(refractory) insulation. A large variety of metals is used in design and fabrication, from simple carbon steel to stainless steel and low-alloy/high-alloy materials. Several types and configurations of are available Please feel free to contact us for any request or application you need. Glutine dampers are normally used to intercept or regulate gas flows; they can be single blade and they are mainly suggested to be used in square/rectangular ducts rather than in circular ducts. Actuation system can be by electric, pneumatic or hydraulic; manual actuation is also possible by means of a manual irreversible gearbox. Several types and configurations of Glutine dampers, Butterfly dampers, Louver, and Multi-Louver Damper Available with us. Types : Butterfly, Louver and Multi-Louver Damper, Glutine Dampers, etc.

There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don’t look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn’t anything embarrassing hidden in the middle of text.    

A bypass damper is provided to safe guard the fabric media before the bag house if the temperature rises beyond design limit. This damper will be normally closed during normal operation. However it will be open at predetermined set point from the temperature detector located before the bag house. This will bypass the fumes/gas from the baghouse to the fan which will result in safeguarding the baghouse. ECOMAK offers 3-way dampers, Lourve-dampers, guillotine dampers and V-I-V Dampers for the applications stated above.

Dampers are used to throttle the air entering or leaving a fan and to control airflow in branches of a system or at points of delivery. Dampers control airflow by changing the amount of restriction in an airstream. Increasing the restriction creates a larger pressure drop across the damper and dissipates some flow energy, while decreasing the restriction reduces he pressure differential and allows more airflow Single Blade Dampers This is the cheapest and simple type of damper normally fitted at fan inlet for manual control. This damper is suitable for situations where accurate volume flow is not required.   Multivane Dampers Control dampers are offered with either parallel or opposed blades. Each style has distinguishing characteristics in regards to control of the fan’s performance plus a change in air velocity profile. Parallel blade dampers have excellent control over the range of 75% to 100% wide open volume due to the amount of control arm swing required to modulate the blades. Parallel blades are used when greater control is required near the top end of the volume operating range or for systems requiring two position (fully open or fully closed) operation. Parallel blades should not be used upstream of critical components due to uneven airflow. Opposed blade dampers offer the best control over the entire operating range. Opposed blades are used for applications where it is necessary to maintain even distribution of air downstream from the damper. This style of blade is the best selection for ducted outlets.     Type of Dampers Backdraft Dampers Inlet Box Dampers Nested Inlet Vane Dampers External Inlet Vane Dampers