Home Dehumidifier Dealers

We are offering flowmeter bpc (brass body) with 200 ml. Humidifier. adjustment of the flow by needle valve with micrometrical regulation.internal filter included.standard flow 0-15 lpm of oxygen.polycarbonate,autoclavable humidifire bottle.

Infant Resuscitator will safely inflate the baby’s lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures. Disposable t-piece patient circuit with PEEP knob ensures proper setting of PEEP based on the patient’s requirement. The patient T-Piece can connect to neonatal masks or endotracheal tubes. Helps to establish and maintain Functional Residual Capacity (FRC) by providing a consistent PEEP throughout the resuscitation process. An accurate manometer provides constant reassurance of mask seal and deliver PIP and PEEP. Consistent PEEP can be delivered to assist with breathing during transport or ventilator circuit change. Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing.

Capable of operating in either invasive or non invasive control mode with flow detection. It can be used for invasive ventilation, non invasive ventilation and oxygen therapy for Adult Care It can be used for invasive ventilation, Infant Bubble CPAP, Resuscitation, and Oxygen therapy for Neonatal Care Designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8050 heated wire humidifier incorporates latest technology that provides Physiological level of humidity at body temperature. The nice 8050 features dual servo control feedback system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized. Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set temperature Vs actual. The design of nice 8050 makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator & Oxygen Therapy for Adult, Paediatric & Neonatal care. The nice 8050 accommodates both high and low flow ventilation therapies, as well as heated and non heated wire breathing system. The nice 8050 delivers precise, reliable performance. An advanced microprocessor controller assures the control of the system. The system responds immediately to any change in settings, and constant self diagnostic verify proper operation every second of use. High and low temperature protection is assured through out operation, including warmup and setting changes. if the delivery temperature exceed 41ºC independent circuitry shutdown all heating elements.

We are progressive Manufacturer, Exporter and Supplier of Pharmaceutical Dehumidifier in Mumbai, Maharashtra (India). Buy safe and reliable Pharmaceutical Dehumidifier made from solid with good durable material. Buyers can get Pharmaceutical Dehumidifier from us as per requirements. We offer customized solutions for it as well.   Features : 3 in 1 - dehumidifier, air - purifier and dryer Moisture removal - 13 liters / day Water tank capacity - 6.5 liters Power controls - lcd display / touch control 12 hours timer Extremely silent Air - purifying filter Power rotary compressor Automatic humidity control Auto frost control Full water tank warning signal Continuous drainage Easier mobility with convenient wheels Recyclable materials for environmental conservation R - 134a refrigerant Running temperature - 50c - 350c Voltage / frequency (volts/hz) - 220 - 240v, 50hz Power input (watt) - 320w Dimension - 21.7 x 13 x 9.3 inch (hxwxd) - 550 x 330 x 235 mm Weight - 18 kgs.

Model : FM-OS-501 Water Contact Parts: AISI 304 Quality Stainless Steel. Other Parts: Rust Proof, Powder Coated. Water Evaporation Capacity: 40 Liters/hr. Water Regulator: Imported Gate Valve. Air Quantity: 2500 CFM. Oscillation: 170 degree angle. Gear Unit: Continuous Duty, Double Reduction Type. Motor capacity: 0.75(3/4) HP, 3 Phase, 400/440 Volt, 50 Hz. AC Supply. Dry Weight: 45 kg. Mounting: Wall Mounting/Ceiling Hanger/Floor Mounting Stand or Trolley Mounting. Packing Dimension & Gross Weight: 650 mm X 750 mm X 750 mm (65 kg approx).

A device used to remove moisture from air is called dehumidifier. Dehumidifier is usually used for health or comfort reasons and to eliminate foul odor. White Westinghouse USA, are with the world class dehumidifiers. These dehumidifiers show high efficiency but consume very less energy. This is a good point for the customers to think about who are having the misunderstanding that power consumption would increase if they install a dehumidifier at home. The dehumidifiers with the White Westinghouse,USA are sleek, compact and silent thus appropriately designed to match with the interior décor of any home. The best thing about this company is that they have a team of trained professional who take good care of the dehumidifiers before and after sale. Customers can also sign up an Annual Maintenance Contract (AMC) that assures maintenance of dehumidifiers throughout the year for its smooth working thus increasing its life.

The humidifier is made of stainless steel With a strong heart a centrifugal sealed type fractional motor. The Motor shaft , nuts and bolts are of high quality steel & brass. Other Components used in equipment are made of good quality rubber & Thermoplastic to essure the durability and non corrosion of the equipment. It splits the solution of formalin & water ( 30: 70) into microparticals. Due to high aerodynamic stability the formalin droplets remains suspended In the atmosphere for longer duration and because of penetrating property it Ensures 100 % sterile germ free zero bacterial environment. The Multipurpose disinfector instantly destroys even air born bacteria. It can Be easily operated. The disinfector is ideally for de-contamination Of pharmaceutical labs, hospitals, production units, animal houses, poultry farms, egg storage and silk warm rearing houses in sericulture industries Technical Specifications : Material of Constructions - Stainless Steel Motor - Single Phase, 2800 RPM Capacity : 3 Liter 5 Liter Optional : Humidifier Controller Box

We offer premium Humidifier (aerosol disinfector) to buyers all over India and abroad. Our Laboratory Humidifier is specially designed to create humidity in a particular area such as in Green Houses, Tissue Culture, Labs, Pharmaceuticals, Packing, printing industries etc. In addition, it is also used for the disinfection in operation theatres, path labs, microbiology labs, pharmaceutical industries in production departments and other R & D laboratories. We are a well-established Laboratory Humidifier Manufacturer, Exporter and Supplier from Delhi, India. We make them available in 3 Litres, 5 Litres, 8 Litres or any other capacity on request.

We offer microprocessor based humidity instruments based on both classical DRY-WET principle (with highest possible degree of accuracy of ±1%) & capacitive sensors .We also offer wall mounted, panel mounted Humidity indicators , Controllers, data loggers, Transmitters etc. The Humidity instruments have their applications in pharmaceutical industry, leather industry, Research Institute, Tea & Coffee industry etc.

Based on the rotating disc-splash plate principal. It produce only super fine particles of micron size, which become part of the atmosphere, thereby reaching every corner of the room, resulting in uniform humidity. Due to the upward thrust imparted to the micron size water droplets, by high speed motorized Unit, they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing upto 3 liters of water in an hour at full evaporation in the dries possible ambient condition. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume upto 40 cu. Mtrs. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure fumigation. To work on 220/230 volts A.C. supply.

HUMIDIFIER S. S. Body DR 143 Based on the ratating disc-splash plate principal. It produces only super fine particles of micron size, which become part of the atmosphere, thereby reaching every corner of the room, resulting in uniform humidity. Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time.he unit is capable of atomizing up to 3 litres of water in an hour at full evaporation, in the driest possible ambient conditions. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cu. mtrs. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation. To work on 220230 volts A.C. supply OPTIONAL ACCESSORIES a) Control box with humidistat b) Automatic 0-60 minutes ''GERMAN'' Timer