NICE NEOTECH MEDICAL SYSTEMS P. LTD Tiruvallur, Chennai, Tamil Nadu

Negative pressure to absorb or suction the mucous from the lungs of the patient. Helps keeping airway clear by removing mucus from the lungs. Suction pressure is indicated in negative pressure gauge. Bottle has white level mark that indicates the suction level. Suction hose is given along with the bottle. The hose is made of polyolefin given with tight fittings. The hose is compatible to be used by any pin. Instructions are inscribed on the bottle about usage.

Simulate level of resistance and lung compliance and provide consistent accuracy. Can be used prior to placing a breathing circuit on a patient to ensure patient safety. Can also be used for demonstration and training. Test Lung- 25 ml Test lung Volume- 25ml 15mm connector port as per ISO standard Flexible silicon bellow Test Lung- 50 ml Test lung Volume- 50ml 15mm connector port as per ISO standard Flexible silicon bellow Test Lung- 1000 ml Test lung Volume- 1000ml 15mm connector port as per ISO standard Nitrile Inner Rubber

Application : Hospital

T-piece connector to connect to resuscitation mask or endotracheal tube. Designed with PEEP control knob at the T-piece connector for adjustment of PEEP level based on patient’s requirement Corrugated design ensures non-kinking operation and smooth airflow for patient safety. Lighter weight design to ensure the connectors do not detach bearing higher weights. Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors. Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation. Single patient use.

Rigid bottle with a firm base made of Thermoplastic elastomer. Bottle has white level mark that indicates the suction level. Suction hose is given along with the bottle. Bottle is compatible to withstand high temperature. The hose is made of polyolefin given with tight fittings. The hose is compatible to withstand high temperature. Instructions are inscribed on the bottle about usage.

Highly accurate sensor with accuracy of ± 0.2 °C Stainless Steel 316 implantable grade sensor tip with broad surface. Long length cable to reach the infant from the warmer and incubator. Easy to plug in/out male connector. Biocompatible material ensures the baby is free from skin and ocular irritation Probe is disposable after single use.

The external insulator is made up of silicon and inner Teflon wire to withstand high temperature. Provided with rigid T adaptor for fixing with breathing circuit and humidification. Heater wire with 2 pin electroplated socket to ensure more safety when used with humidifier. Conjugated with reusable breathing circuits for multiple use. Designed to withstand sterilization process enabling contamination free multiple use. Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

Conjugated with Resuscitators for non-spontaneously breathing patient to restore spontaneous breathing. Compatible to fit with 15mm T-piece or Y-type connector. Soft, smooth contact with the skin provides more comfort to the patient during treatment. It anatomically shape to fit the patient’s nasal and mouth with tight contact to avoid leakage. Made of biocompatible silicon material ensures irritation free contact with patient’s skin for long time. Available in three different nares sizes: Size 00, Size 0 & Size 1

Used to measure the respiration rate of baby suffering from respiratory failure. Baby respiration sensor is used with nice 5050 Respiration monitor. Disposable Pneumatic sensor capsule is taped to the baby’s abdomen Accurate in monitoring. The non-kink plastic tubing is non-electrical It does not restrict the baby’s movement. The performance is not impaired when covered by the baby’s clothes

Y Shaped Eye pad prevents light and provide comfort to baby without damaging eyes Zero % ultraviolet and blue light penetration Soft, smooth contact with the skin provides more comfort to the patient during treatment Loop and hook design to ensure the pad do not dislocate from baby’s eye. Biocompatible material ensures the baby is free from skin and ocular irritation Available in three different sizes: Small, Medium, Large

Elastic strap is provided to fix on baby head. Zero % ultraviolet and blue light penetration. Soft, smooth contact with the skin provides more comfort to the patient during treatment Biocompatible material ensures the baby is free from skin and ocular irritation Available in three different sizes: Small, Medium, Large

720 ml compressed volume for Pediatric / Adult patients. Rigid polycarbonate material ensures to withstand higher temperatures of hot water. Aluminium base plate ensures to transfer and hold the heat inside the chamber. Water inlet port with tubing and auto feed with single float mechanism. Float seal mechanism to prevent the overflow of water from the chamber. Standard complied 22mm male port for inlet and outlet gas hose connectors. Highly legible water line in chamber makes it easily visible from all angles.

Oxygen hood made of single mould polycarbonate material for easy visibility. Silicon flaps are attached to minimize the wastage of oxygen. Oxygen inlet port and temperature port is available for easy access. Available in two sizes: Small and Medium.

Oxygen hood made of transparent acrylic for easy visibility. Neck port adjustment to minimize the wastage of oxygen. Two side ports for easy access during procedures. Oxygen inlet port and temperature port is available for easy access. Available in three sizes: Neonates, Infant and Pediatric

Respiratory Humidifier is designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8050 Respiratory humidifier (Medical Humidifier) incorporates latest technology that provides Physiological level of humidity at body temperature. The nice 8050 advanced microprocessor controls & delivers precise, reliable performance in humidifying the respiratory medical gas before delivered to the patient and ensures 0% water condensation in any breathing circuit. Capable of operating in either invasive or non-invasive control mode with flow detection. The nice 8050 features dual servo control feedback humidifier system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized. Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set limit temperature Vs actual. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. The design of nice 8050 Servo Humidifier makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator and High Flow Oxygen Therapy for Adult, Pediatric & Neonatal care for both invasive and non-invasive application. The servo controlled Humidifier accommodates both high and low flow ventilation therapies, as well as heated and non-heated wire breathing system.

720 ml compressed volume for Pediatric / Adult patients. Medical grade rigid polysulfon material ensures to withstand higher temperatures of hot water and multiple use. Aluminium base plate ensures to transfer and hold the heat inside the chamber. Removable aluminium base plate with O-ring easy to clean and multiple use. Optimal guided flow circulation within the chamber. Lower water level needed and larger heater contact surface to reduce required heating time. Standard complied 22mm male port for inlet and outlet gas hose connectors. Isolated water inlet port makes it easy to refill water and minimizes the work load of removing chamber frequently. Float seal mechanism to prevent the overflow of water from the chamber. Highly legible water line in chamber makes it easily visible from all angles. Flow resistance, compliance and leakage conform to ISO 5356 for connectors. Designed to withstand sterilization process enabling contamination free multiple use. Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

360 ml compressed volume for infant / neonatal patients. Medical grade rigid polysulfon material ensures to withstand higher temperatures of hot water and multiple use. Aluminium base plate ensures to transfer and hold the heat inside the chamber. Removable aluminium base plate with O-ring easy to clean and multiple use. Optimal guided flow circulation within the chamber. Lower water level needed and larger heater contact surface to reduce required heating time. Standard complied 22mm male port for inlet and outlet gas hose connectors. Isolated water inlet port makes it easy to refill water and minimizes the work load of removing chamber frequently. Float seal mechanism to prevent the overflow of water from the chamber. Highly legible water line in chamber makes it easily visible from all angles. Flow resistance, compliance and leakage conform to ISO 5356 for connectors. Designed to withstand sterilization process enabling contamination free multiple use. Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

Designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8010 Respiratory humidifier incorporates latest technology that provides Physiological level of humidity at body temperature. The nice 8010 advanced microprocessor controls & delivers precise, reliable performance in humidifying the respiratory gas before delivered to the patient and ensures 0% water condensation in any breathing circuit. Capable of operating in non-invasive control mode at high, medium and low setting. When use a heated wire breathing system from nice 8010, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized. Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8010 will alert at variations of set limit temperature Vs actual. Optimal humidity of greater than 12 mg/l promotes mucociliary clearance and reduces the work of breathing. The design of nice 8010 makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator and High Flow Oxygen Therapy for Adult, Paediatric & Neonatal care for non-invasive application. The nice 8010 accommodates both high and low flow ventilation therapies, as well as heated and non-heated wire breathing system. An advanced microprocessor controller assures the control of the system. The system responds immediately to any change in settings, and constant self-diagnostic verify proper operation every second of use.

Transparent side panels ensures the visibility of the baby from long distance. Detachable and unbreakable hinge fixed to the side panels helps to sterilize easily. The bed can be tilted on both sides for Trendelenburg and Fowler’s position. Soft baby mattress for the comfort of the infant. Strong lockable castors for easy movement and lock in same position. Storage tray for placing records.

Translucent bassinet for the placement of the infant. Fixed bed holds the baby gently in position. Soft baby mattress for the comfort of the baby. Strong lockable castors for easy movement and lock in same position. Utility tray for storage purposes. Optional features: IV stand, Observation light.

High-flow oxygen therapy or HFNC oxygen therapy is non-invasive respiratory support that delivers warmed, humidified, oxygen-enriched air to patients. Cascaded flowmeters of 60 LPM or 90 LPM is used for therapy. Conjugated with High flow therapy nasal cannula (HFNC) to provide more accurate and comfort in supply of high flow of oxygen. High flow breathing circuits ensures no resistance to the supplied gas to the patient. Active mechanical Air oxygen blender fio2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive mode of operation supports the patient based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. Strong SS stand with dovetail grooving for easy fixing of humidifier and accessories Nasal Cannula available for Adult, Pediatrics, Infant, Neonatal and Premature babies.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient. Active mechanical Air oxygen blender fio2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient. Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O. Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device. Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. Strong SS stand with dovetail grooving for easy fixing of humidifier and accessories Disposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient. Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. LED indicator to display the level of PEEP set to deliver to patient. High PEEP alarm and Low PEEP alarm for indication of PEEP levels. Low Air / Oxygen alarm indications for indication of low input pressure. Power failure alarm to alert the user or clinician. Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient. Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O. Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device. Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing.

Bubble CPAP also known as Neonatal CPAP, is a unique bubble generating system that provides consistent and accurate delivery of CPAP to neonatal patients. Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. LED indicator to display the level of PEEP set to deliver CPAP to neonatal patients. High PEEP alarm and Low PEEP alarm for indication of PEEP levels. Low Air / Oxygen alarm indications for indication of low input pressure. Power failure alarm to alert the user or clinician. Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient. Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O. Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device. Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive and Non-invasive mode of operation supports neonatal patients based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. Strong Aluminium stand with dovetail grooving for easy fixing of humidifier and accessories Disposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient. Different types of patient interfaces like CPAP Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.

Bubble CPAP also known as Neonatal CPAP, is a unique bubble generating system that provides consistent and accurate delivery of CPAP to neonatal patients. Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100% Highly calibrated blender ensures accurate % of oxygen delivered. LED indicator to display the level of PEEP set to deliver CPAP to neonatal patients. High PEEP alarm and Low PEEP alarm for indication of PEEP levels. Low Air / Oxygen alarm indications for indication of low input pressure. Power failure alarm to alert the user or clinician. Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient. Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O. Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device. Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water. Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient. Invasive and Non-invasive mode of operation supports neonatal patients based on their requirements and comfort. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. Strong Aluminium stand with dovetail grooving for easy fixing of humidifier and accessories Disposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient. Different types of patient interfaces like CPAP Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.