Vertical Storage Chamber
80,000 Per Piece
2 Piece (MOQ)
Bacteriological Incubator
14,000 Per piece
1 Piece (MOQ)
We manufacture and provide superior quality bacteriological incubator which is fabricated using the qualitative raw material. Our bacteriological incubators are double walled with the outer body fabricated with mild steel while the inner body in mild steel, aluminium or stainless steel. The inner body is lagged with glass wool and is temperature controlled by a capillary type hydraulic thermostat with an accuracy range of + 0.5ºC. Within the incubator, the glass door is available which is fitted with forced air circulation by means of fan and motor arrangement at the bottom and solid state temperature controller with a front dial to set the temperature. The three side heaters manufactured from nichrome wire provided by the member model. Bacteriological Incubator Manufacturer in Chennai, Bacteriological Incubator Dealer in Chennai, Bacteriological Incubator Shop in Chennai, Bacteriological Incubator Supplier in Chennai, Bacteriological Incubator Price in Chennai Bacteriological Incubator Manufacturer in Tamilnadu, Bacteriological Incubator Manufacturer in Chennai, Bacteriological Incubator Manufacturer in Kanchipuram, Bacteriological Incubator Manufacturer in Tiruvallur, Bacteriological Incubator Manufacturer in Cuddalore, Bacteriological Incubator Manufacturer in Villupuram, Bacteriological Incubator Manufacturer in Vellore, Bacteriological Incubator Manufacturer in Tiruvannamalai, Bacteriological Incubator Manufacturer in Salem, Bacteriological Incubator Manufacturer in Namakkal, Bacteriological Incubator Manufacturer in Dharmapuri, Bacteriological Incubator Manufacturer in Erode, Bacteriological Incubator Manufacturer in Coimbatore, Bacteriological Incubator Manufacturer in The Nilgiris, Bacteriological Incubator Manufacturer in Thanjavur, Bacteriological Incubator Manufacturer in Nagapattinam, Bacteriological Incubator Manufacturer in Tiruvarur, Bacteriological Incubator Manufacturer in Tiruchirappalli, Bacteriological Incubator Manufacturer in Karur, Bacteriological Incubator Manufacturer in Perambalur, Bacteriological Incubator Manufacturer in Pudukkottai, Bacteriological Incubator Manufacturer in Madurai, Bacteriological Incubator Manufacturer in Theni, Bacteriological Incubator Manufacturer in Dindigul, Bacteriological Incubator Manufacturer in Ramanathapuram, Bacteriological Incubator Manufacturer in Virudhunagar, Bacteriological Incubator Manufacturer in Sivagangai, Bacteriological Incubator Manufacturer in Tirunelveli, Bacteriological Incubator Manufacturer in Thoothukkudi, Bacteriological Incubator Manufacturer in Kanniyakumari, Bacteriological Incubator Manufacturer in Krishnagiri, Bacteriological Incubator Manufacturer in Ariyalur, Bacteriological Incubator Manufacturer in Tiruppur
Best Deals from Laboratory Chamber
Environmental Test Chambers
200,000 - 2,500,000 Per piece
1 Piece (MOQ)
Salt Spray Test Machine with Touch Screen Controller Xenon Lamp Aging Test Chamber Air Cooled Stainless Steel Environmental Test Chamber Enviromental Test Chamer 60kg Dual Arm Drop Testing Machine 10.0Kw Environmental Test Chamber for High Temperature and Pressure Rain Testing Water Immersion Test Equipment with 304 Stainless Steel Environmental Testing Chambers 200°C 4000L Aging Oven 0.225 m3 / 1m 3 VOC And Formaldehyde Emission Test Chamb er For Compound Wood Floor 1 Cubic Meter VOC Release Environmental Chamber IEC60335 Environmental Test Chamber , Waterproof Oscillating UV Accelerated Weathering Test Chamber 1200 Degree Box Type Sintering Muffle Furnace Ceraimc Zirconia With 90% Energy-saving For Laboratory Vertical Drip Tester for IPX1, X2 Test Equipment Wall mounted Stainless Steel Environmental Test Chamber / Vertical Drip Tester for IPX1 , X2 Test GB/T 4857.4-92 Intelligent Carton Box Compression Testing Machine 1500L Environmental Test Chamber Stainless Steel Aging Oven with Double Doors 1.5 M Long UV Curing Machine for Screen Printing Paper Sheet 380V Comprehensive Rain Test Box Full Water Spray Test Effect Comprehensive Rain Test Box Water Tank Inside, Circulating Water IPX8 Pressure Control Immersion Test Device Automatic Regulation SIEMENS Control Environmental Test Chamber, Diving Test Equipment Split Type UV Aging Test Chamber 450 X 450 X 450mm, Programmable Ozone Test Chamber Environmental Test Chamber Sand and Dust Test Chamber Digital Te mperature Display Size Customization PVC Salt Spray Test Chamber Environmental Test Chamber R400 Comprehensive Rain Test Box Full Water Spray Test Effect Temperature and Humidity Environmental Test Chamber LCD Color T ouch Screen High Efficient Environmental Test Chamber 2 M Long UV Dryer Machine For Sheet Glass Stainless Steel Environmental Test Chamber 800L High Temperature Aging Oven ASTM D6007-2 1 M³ Test Chamber for Formaldehyde Release 600L Salt Fog Corrsion Test Chamber Environmental Test Chamber Environmental Test Chamber Box Compression Tester Programmable Water-Cooled Thermal Shock Test Chamber Enviromental Test Chamer Dust Test Chamber Environmental Test Chamber UV Sterilizer With 304 Screen Stainless Steel 800L Environmental Test Chamber Water Cooled Xenon Lamp Testin g Chamber Environmental Test Chamber UV Accelerated Weathering Tester Programmable Water- Cooled UV Xenon Arc Weather Testing Chamber Reliable Measure Precision and High-Speed Box Compression Tester Good Parallelism LCD Touch Screen Controller Thermal Shock Chamber ASTM D6007-02 Formaldehyde Test Chamber High Temperature Environmental Test Chamber 800L Aging Oven IPX56 Strong Water Spray Test Chamber Enviromental Test Chamer Single Wing Drop Testing Machine Box Type Environmental Test Chamber Enviromental Testing Chambers 2 m Long UV Curing Machine Constant Environmental Test Chamber Environmental Test Chamber Touch Screen Raining Testing Chamber Transportation Vibration Tester for Toys Electronics and Package 270L Salt Spray Test Environmental Testing Machine 1500L Environmental Testing Chambers Aging Oven Environmental Test Chamber 100kg Transportation Vibration Tester 110L PVC Salt Spray Test Chamber Environmental Test Chamber Intelligent Compressive Strength Testing Machine 1000kg Transportation Vibration Tester for package Test Ultraviolet Aging Testing Chamber
Environmental Test Chambers
Get Price Quote
We manufacture, export and supply a wide range of Environmental Test Chambers for various segments like Automotive, Electronics, Defense, Aerospace, Steel, Leather and Power Industries. The clients can get the Environmental Test Chambers computerized and get the maximum advantage. We develop and design Environmental Test Chambers in accordance with the global standards. We are a reputed Manufacturer, Exporter and Supplier of Environmental Test Chambers. Design Brief : Cutting-edge technology Service-proven, maintenance-friendly Highest possible quality, reliability and durability Economical to run, environmentally friendly Modular construction for ultimate in flexibility Environmental Simulation and Acoustic Control : Environment Simulation : Hot Chamber Cold Chamber Humidity Chamber Cyclic Chamber Climatic Chamber Environmental Chamber Walk in Chamber Thermal Shock Freezer Cabinet Chiller Plant Oil & Water Bath Acoustic Control : Noise Booth Acoustic Door Sound Proofing
Cold Room Cabinet
250 Per Square Feet
Vacuum Degassing Chamber
7,553 - 75,530 Per Unit
1 Unit (MOQ)
Vacuum Chamber With Rotor Pump
95,000 Per Piece
1 Piece(s) (MOQ)
The Vacuum Chamber With Rotor Pump, provided by us, are acclaimed for their make & durability. We believe in keeping transparency in the transactions and thus we offer an invoice to the clients stating all the necessary details. We undertake both online and offline payment processing methods. Our entire range of products is produced as per international quality standards. Therefore, they are dependable and worth the price.
Bacteriological Incubator
Get Price Quote
Construction : Bacteriological Incubator is sturdy. Double walled with doors, Inner chamber made of stainless steel. Door fitted with Double glass window and heavy stainless hinges facilitate inspection of samples without opening the door. Transparent glass door let viewing the specimen inside without distributing chamber temperature. The outer body is of thick mild steel sheet with attractively finished in powder coating for durable operation. Inner space in between the walls is filled with 3* fine glass wool insulation to minimize the heat loss between the walls. The temperature is controlled by the room temperature above the ambient up to 60o C with a sensitivity of +/- 1 to 3o C temperature is achieved by putting nichrome wire heater inside the ribs at back side of the chamber to uniform temperature. Inner chamber, accommodates easily removable stainless steel perforated trays adjustable height, adjustable Air ventilator is provided at the top. Incubator is fitted with a suitable Air Circulating Fan assembly (Optional) Supplied complete with trays, air ventilators, pilot lamps indicating Lamps on/off switch, & Cord and plug. Suitable to operator on 220 volts, 1 Phase, 50 Hz AC Supply. Optional Accessories : Microprocessor Based Digital Temp Indicator cum Controller Air Circulating Fan Timer Digital 0-90 hour Digital Temp Indicator cum Controller
Plant Growth Chamber MPGR14
Get Price Quote
1 Piece(s) (MOQ)
Environmental Chamber
Get Price Quote
We are offering wide range of qualitative Humidity Chamber, these are known for its durability and high performance. These are highly in demand among our client.These stability chambers are widely appreciated for their silent features like reliable performance, easy installation, low maintenance, efficiency.
Climatic Chamber
270,000 Per Piece
Climatic Chamber
Get Price Quote
Climatic Chamber used to test effects that climatic changes have on products placed within environmental chambers. These chambers evaluate product quality and identify weaknesses. High temperature, low temperature and humidity testing conditions can be done in single unit.
Bacteriological Lab Incubator
Get Price Quote
Techno digitally controlled model bacteriological lab incubator is a double walled chamber with interior made of SS 306 grade sheets & exterior made of cold rolled mild steel sheets finished in epoxy powder coating. Inter space in between walls is tightly packed with glass wool to minimize radiation heat loss. The inner chamber accommodates SS perforated trays at adjustable height. A double walled insulated door mounted on heavy duty hinges & provided with locking arrangements. Temperature is controlled by a digital temperature controller working in conjunction with PT100 sensor housed in the hot zone. Air circulating fan assembly driven by suitable motor is incorporated in the unit of maintaining uniform temperature inside the working chamber. Adjustable air ventilator is provided at the top. Built in front control panel accommodating pilot indicating lamps, ON/OFF switch, digital controller are located at the lower portion or at the right side of the chamber. OPTIONAL : Microprocessor based digital PID controller with SSR output better ± 1°C accuracy, Digital timer.
Laminar Air Flow Chamber
35,000 - 90,000 Per piece
1 Piece (MOQ)
AVALIBLE FOR THE FOLLSING SIZE’S MODEL HL-22 / VL-22 HL-32 / VL-32 HL-42 / VL-42 HL-62 / VL-62 Working Area 2’ x 2’ x 2’ 3’ x 2’ x 2’ 4’ x 2’ x 2’ 6’ x 2’ x 2’ Size of HEPA Filter 2’ x 2’ x 4” 3’ x 2’ x 4” 4’ x 2’ x 4” 3’ x 2’ x 4” No. of HEPA Filter 1 No. 1 No. 1 No. 2 Nos. No. of PRE Filter 1 No. 2 Nos. 2 Nos. 2 Nos. Illumination 1 x 20 W 1 x 20 W 2 x 40 W 2 x 40 W
Reusable Neonatal Humidifier Chamber
Get Price Quote
Autoclavable low compressible volume humidifying chamber. Chamber compressible Volume for high flow 360ml. Maximum water capacity 230ml. 360 deg viewable water line for ease to monitor the water level from all angles. Highly durable intended for multiple usages. Withstands prolonged exposures to high temperature and repeated sterilization. Water fill port for refilling water during operation. Bio-compatible material minimizes risk on patient with safer material. Burn-free design minimizes risk of accidental burn
Bacteriological Incubator
15,000 Per Piece
1 Piece(s) (MOQ)
Environmental Chamber
Get Price Quote
The environmental chamber includes a platform for supporting the plurality of electronic systems and receiving the settled amounts of the airborne contaminants.
Bacteriological Incubator
Get Price Quote
A. Bottom Heated: These are used for drying and staining of slides, paraffin embedding, tissue culture work, anti-body, excellent for microbiological determination etc.Construction:Double walled chamber, inner made of Alu/SS and outer made of M.S. sheet with beautifully painted. The gap between the two walls are filled with glass wool for proper insulation to avoid heat loses. Supplied with two doors inner plexy doors for viewing the specimen inside without disturbing the chamber temperature. Imported heaters are placed at the bottom of the equipment, temperature is controlled by imported thermostat having a temperature range of 30’C –110’C with working temperature from 5’C above ambient to 80’C with an accuracy +/- 1’C and without thermometer.Control panel:The equipment is provided with a panel, which is on the top of the equipment having a imported thermostat, On/Off switch and pilot lamp.Power Requirement: -220/230 V single phase, 50Hz.Fan and Digital Temperature Controller cum indicator can be supplied on request. Optionals: Digital temp. Ind. Cum controller with P.D. action Air circulation fan. Digital timer 999 min. or 999 hours
Air Chamber
Get Price Quote
bacterilogical incubator
Get Price Quote
“MIGHTY INSTRUMENTS” Bacteriological incubator reliable day to day operation in variety of uses. Drying and staining of slides, paraffin embedding, Tissue culture work, incubation of antibody test, excellent for microbiological determinations etc. Optional Accessories: Digital temp indicator com –controller with RTD SENSOR Air circulating fan assembly Digital timer
Altitude Chamber
Get Price Quote
Temperature range: -70 °C ~+150 °C (changeable according to user's demand) Temperature accuracy: less than ± 0.3 °C Temperature fluctuation: less than ± 0.5 °C Humidity range: 20% ~ 98%RH (10% ~ 98%RH is an optional spec.) Humidity stability: less than ± 2% RH Humidity uniformity: less than ± 3% RH Heat-up rate: More than 3 °C min Pull-down rate: More than 2 °C min Max. final vacuum: 1mbar (100pa) Vacuum pump: Two stage oil rotary pump or dry pump Condensing: Air cooled or water cooled type Volume: 345L, 405L, 512L,720L and (Different size of chambers are available on users demand.)
altitude test chamber
Get Price Quote
CME’s AT series of altitude test chambers are used to test aerospace/aeronautical components where pressure plays a significant role along with temperature and humidity. A standard AT chamber could simulate environmental conditions of up to 50 Km (above sea level) in its test space. Built with galvanised steel and the touch of epoxy based powder coating, the structure is rigid enough to withstand extreme testing conditions. The test space is made of 10 mm stainless steel (grade AISI-304), which is TIG welded and reinforced to withstand the pressure changes. It also has adjustable shelves and an entry port to conduct live testing on the specimen. TEFC motor with vacuum feedthrough sealing is used with an axial flow fan to maintain a smooth laminar air flow across the test space. To avoid condensation during low temperature cycles, heaters are provided along with dual silicone extruded gaskets in the test space frame. As rightly quoted “Good engineering is a perquisite for reliability”, a lot of detailing has gone in both the system designing and the component selection of the AT series. Be it in refrigeration system comprising the semi hermetically sealed reciprocating compressor, high efficiency evaporator unit, in-built water-cooled condenser, on-Demand cooling, et all. are all carefully designed to offer the best reliability to the customer. The chamber offer altitude ranges of up to 10 mbar, temperature range of -70 0C to 180 oC and time to vacuum of less of 30 min. AT series is equipped with the “Envicom Graphite series” controller, offering the benefits similar to the other chambers, the thermal shock chamber also has the Envicom Graphite Series controller which is touch enabled and bundled with miltiple features to augment the testing experience. The ports of Ethernet, RS 232 and RS 485 ensure remote monitoring of the chamber as well as integration with 3rd party software such as NI/Lab view. To learn more about the Envicom Graphite Series controllers, visit its page. The Altitude chamber can also be customized as per the test requirements. To know more visit the customized solution page.
Humidity Chamber
Get Price Quote
Digital Microprocessor based, PID, Temperature Indicator cum controller with display resolution of 0.1°C. Digital Microprocessor based, PID, Humidity Indicator cum controller with display resolution of 1%Rh. (direct reading). Temperature controlling accuracy ±2°C. Humidity controlling accuracy of ±2 - 3% @ 40% to 98% Rh. Display accuracy ±0.5%, full scale. Class A grade, PT-100 Sensor (RTD) Construction: Vertical model. Inner Chamber made of dully polished Stainless Steel, 304 Grade, Outer made of Mild Steel, powder coated. Polyurethane Foam Insulation (PUF). Handle, lock and heavy-duty hinges for door. Door with Neoprene rubber gasket for leak proof. Forced air circulation to maintain uniformity of temperature. Frost Free Viewing Window to observe the testing components during working condition. Double walled full front opening door. Inner lined with SS. Long life Ni-chrome, SS heaters with fins for higher temperature. Automatic cut off for circulating fan when the door is opened Lockable Wheels for easy movement. Drain facility is provided to collect water, which is produced during humidity testing condition. Adjustable SS meshed trays. Refrigeration System: Single stage with hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser. Safety features: Provided with Suitable overload protectors and MCB s to ensure absolute safety to Electrical / Electronics and Refrigeration Systems. Provided with automatic water filling for humidity test. Door light is provided for viewing window. Single phase preventor will be provided for 3-phase instruments. High Pressure and Low Pressure safety cut off for Compressors. Fully solid-state relay (SSR) control for heaters. High and Low temperature deviation alarms. Power Supply: Single-phase 230Volt / Three phase 440 Volt, 50 Hz. Optional: Calibration certificate traceability to NABL standards (Temperature controller with sensor). Tower Light with Red, Orange & Green indication to know the status of the machine. Provided with Specimen Protection to protect Components from high temperatures. With multi Programmable, cyclic Eurotherm PID controller with ramp and soak. IR lamps facility provided for component surface testing. Full Stainless steel (Inner & Outer) . Computer Interface (RS232 / 485). Available in different chamber sizes as per customer’s requirements. Note: Due to continuous development SSLIPL reserves the rights to change specifications without prior notice.
Salt Spray Chambers
Get Price Quote
We offer an exclusive range of excellent quality Salt Spray Chambers. These are fabricated using rust resistant material and are available in various models to make a choice. Our range offers high end features such as durable finish, high quality, longer duration functionality and compact sizes. Our skilled professionals implement strict quality testing program to ensure the unmatched quality of our products. We believe in offering our product range in accordance with clients' exact requirements.
CURD INCUBATION CHAMBER
Get Price Quote
We are providing fully automatic combo type incubation chambers with heating and cooling both process together in single chamber. Application: Curd Incubation / Blast Chilling/Storage Standard Incubation time is approx. 4 hours but it will depend upon the packing type and loading temperature of curd with a condition that the chamber temperature should be 45° C before loading. Standard cooling time is approx. 5 hours but it will depend upon the packing type and loading temperature of curd with a condition that timing will be considered after getting chamber temperature as 2° C
Salt Spray Test Chamber
Get Price Quote
Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided. Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at the bottom to take heavy load. The FOG Chamber conforms to ASTM B 117 specification. The volume is of sufficient size to test adequately the desired number of parts without overcrowding. The apparatus consists of a fog chamber, a salt solution reservoir, a supply of moisture free compressed air, atomizing nozzles, specimen supports, provision for heating the chamber, humidifying chamber and control system. The fog chamber is provided with digital temperature controller, pressure gauge, provision for controlling the mist, humidity indicator and solenoid valve to regulate these conditions.
Yuvi Safe- Surface disinfector
5,500 - 6,000 Per Piece(s)
1 Piece(s) (MOQ)
Stability Test Chamber
99,000 Per Piece
pre cooling chambers
Get Price Quote
Vertical Storage Chamber
Get Price Quote
The Vertical Storage Chamber we offer to our clients is available with 3 vertical partition modules of one foot long. Further, each module has 6 horizontal partitions with trays that assure excellent storage. Available with wheels along with the provision of index cards, these modules assure smooth movement