Laboratory Chamber Dealers in Ahmedabad

EIE-105 NON-REFRIGERATED MODEL EIE-106 WITH REFRIGERATION SYSTEM FOR STABILITY STUDIES EIE-105 Non-Refrigrated Model Double walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated, Temp. Range from ambient +5° C to 60° C controlled by Dual Display Microprocessor based Digital Temp. Controller with +/- 0.5° accuracy, Humidity range from atmospheric humidity to 95 % controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with + 3 % RH. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window. Optional Fittings for EIE - 105 Microprocessor based direct RH digital controller in place of Digital Temp. controller. Hygrometer(0 - 100%) EIE-106 With Refrigeration System: With Refrigeration System. Double walled, inside chamber stainless steel, outer body made of CRC/G.I. - powder coated, Temp. Range from 10° C to 60° C controlled by Dual display microprocessor based Digital temp. indicator cum controller with ± 0.5° C accuracy or better. Cooling system consist of high efficiency Kirloskar Make compressor with relevant accessories. Humidity range from atmospheric humidity to 95 % controlled by Dual display Microprocessor based Digital Temp. Controller (Dry and Wet bulb method) with accuracy + 3 % RH or better. Inner water tank made of stainless steel with ball cock valve. Front door has a full view glass observation window Optional Fittings at Extra Cost Illumination by 2 nos. fluorescent tubes. Digital Environmental controller (Direct % RH Type) Temp. range (dry) 5 to 60°C. Humidity range upto 95% OR Digital controller (Direct % RH Type) Temp. range (dry) above ambient to 60°C. Humidity range upto 95% with Printer interface to connect any dot matrix line printer. Features : Microprocessor based, programmable - date, time, humidity/temp., print interval. Data memory storage capable of storing data upto 30 days. High/Low deviation alarms, low water level electronic cut-off with visual alarm. Shared printing compatibility with other Humidity Ovens. Computer Software (HControl) provided Digital Controller with printer interface installed to monitor from computer in remote location. Single software for three Humidity Oven.(however, cabling shall be charged extra) 4 Point Temp. + 4 point Humidity data logger with sensors placed at specific points in chamber with printer interface and memory. Voltage Stabilizer for above 6 KVA The above Humidity Oven can be converted into PLANT GROWTH CHAMBER by using 4 fluorescent tube light provided with 24 hours ON/OFF programmable timer for Day /Night effect. Temp. range 15° to 60° C. At extra cost. Optional Accessories(at extra cost) Double wall construction interior fabricated of stainless steel(S.S.304). Exterior of corrosion resistant galvanized sheet, finished in powder coated epoxy paint. Full size glass inner door to inspect samples without affecting the chamber temp. outer double walled metal door with magnetic gasket and lock. Unit mounted on castor wheels for easy movement.70mm polyurethane insulation (PUF) to ensure better insulation and less leakage of temperature or 10% RH from inner body to the surroundings. Air Circulation Temperature is maintained by a quiet running blower circulation air through out the chamber. Forced air circulated vertically down and re circulated through out the chamber for uniform temperature and humidity. Humidity Humidity created by steam injection method. The boiler tank is fitted in the back side of the chamber for better servicing, Electro magnetic switch for controlling the wet heater from burning off if water level is not adequate. Float valve provided to control water level in the boiler tank. Heating & Cooling System Long lasting SS tubular heaters used as heating element. The stainless steel tins provided to ensure better heat transfer. Hermetically sealed compressor CFC free compressor (134 A gas) coupled with evaporation coil and condensor. Trays Removable perforated trays provided made of S.S. Control Microprocessor based temp and direct RH digital PID controller. Humidity directly measured in % RH by electronic sensor. Temp. Range 10 to 70°C, Accuracy +/- 0.5°C Humidity Range 40% RH to 90% RH Accuracy +/- 3% RH ICH Guidelines As per ICH Guide lines, stability studies to be carried out under the following conditions. Long Term At 25°C (+/- 2°C) & 60% RH (+/- 5% RH) Validation ; Validation of the chamber (Heat Mapping) will be done at 8 zones in the chamber using 8 channel scanner (4 works and printout of the result will be provided. For on site validation charges extra. Optional Fittings at Extra Cost: Digital Controller with Printer Interface to connect EPSON dot matrix line printer. Print Interval programmable, can print date, time, temp. and humidity. Do- but with standard PC software and connectivity. * 21 CFR Part 11 Comliance Software Datalogger : 4 point temp. + 4 point humidity datalogger with sensors placed at specific points in chamber with printer interface and memory of 5000 readings per channel. * 21 CFR Part 11 Comliance Software Additional high temperature safety system to cut-off all heaters with audio-visual alarm ensuring temp. within chamber doesn't exceed +70°C Voltage Stabiliser for above unit. EPSON dot matrix 80 column Printer with stand. Standby Humidity and Refrigeration system. 10 Ltr. capacity aspirator bottle(PP) for storage of Mineral water and to serve as input water source for the Water tank/ Steam boiler of Oven i. Silicon rubber tubing - 3 meter for water supply from reservoir to Boiler (Option h and i are compulsory - either customer should have his own arrangement or should be ordered alongwith the Humidity Oven) Pre Installation Mandatory Requirement (Guarantee void incase of non compliance) Distilled water OR DM water continous supply with tap for boiler input of 1/2" BSP at 3 feet height. Room temperature around machine preferably @ 25`C. with air conditioning or a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30 Deg.C. Stabilized Input Voltage of 230V AC 20 Amps. Use of Servo Controlled Stabilizer is recommended. Water drain line with 1/2" nozzle to be provided at floor level.

We are a reputed Manufacturer and Supplier of Stability Chambers (HSW140) from Gujarat. The Stability Chambers offered by us are widely used in laboratories, pharmaceutical industries, research institutes, defense and aerospace industries, research institutes, defense and aerospace indsutries, etc.  Our Stability Chambers are used for controlling temperature and humidity in a balanced manner. Technical specifications : Uniformity of conditions throughout the chamber Direct display of humidity in % RH Pt 100 Sensor for Dry / Wet bulb or capacitance type humidity sensor available Printer interface compatibility PC interface with RS 232-C / or RS-485 for multiple networking of controller Built in high / low conditions alarm Low water level cut off device Complete Stainless Steel Chamber also available

We are offering bacteriological incubator (memmert type). standard double wall fabrication. inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations. the gap is filled with special glass wool for temp. Insulation. double wall door with double window for observation in the chamber. Temperature range 5oc above ambient to 80oc + 2oc controlled by a thermostat. L- shaped thermometer is provided for taking temp. Readings. panel is provided with pilot lamps for mains & heaters, on-off switch, temp. Control knob etc. the equipment is workable on 220 v ac 50 hz single pahse. Heating is achieved from 3 sides. Perforated removable shelves also provided model no size in mm no of shelves capacity s.s.112 300 x 300 x 300 mm 2 28 litre s.s.113 350 x 350 x 350 mm 2 45 litre s.s.114 400 x 400 x 400 mm 2 65 litre s.s.115 450 x 450 x 450 mm 2 95 litre s.s.116 600 x 450 x 450 mm 2 125 litre s.s.117 600 x 600 x 600 mm 2 224 litre s.s.118 900 x 600 x 450 mm 2 252 litre s.s.119 900 x 600 x 600 mm 2 336 litre s.s.120 900 x 900 x 900 mm 3 730 litre optional a air circulating fan. b imported thermostat “ego” “jumo” german with the accuracy of ±1°c. c digital temp. Indicator-cum- controller. d timer 0-24 hours. e digital temp. Indicator.

FEATURES Inner chamber of SS, outer MS body with powder coating. With digital indicator for RH value & temp. read out. Temp.range: 25°C to 45°C. Humidity readout range: 45% RH to 80% RH. With blower system for uniform temperature. With inner glass door for easy visibility. With three SS shelves (racks). Inner chamber size: 18 X 18 X 18 inch, 18 X 18 X 22 inch, 18 X 18 X 40 inch. Power Requirement: 220/230 V AC, 50 Hz Single Phase.

We are one of the leading manufacturers of best quality Thermal Shock Chambers. Our systems fulfill the requirements of international testing standards. We manufacture these chambers using cutting edge technology for best results and defined accuracy of readings.Features:» Premium quality» High levels of accuracy» Safety assured» DurableSpecifications: » Lowest low temp. exposure temp. : 70°C (TSA-101S/TSA-201S -70°C) » Highest high temp. exposure temp. : +150°C (TSA-101S/TSA-201S +200°C)» They conform to testing standard : IEC 61747-5

Kant Plastology feels immensely pleased to offer an advance testing machine as HUMIDITY CHAMBER (CONDITIONING CHAMBER). The offered equipment is constructing by utilizing best quality of raw material and advanced technology by our well skilled engineers. The equipment has Internal Stainless Steel body which procures the rust free usage of equipment. The equipment has advance instruments for exactitude control on Temperature and Relative Humidity, 75mm thick P.U.F. insulation minimize the cooling loss and maintain the temperature of internal chamber. The equipment is designed with user friendly features that make it ease in operation.

The Equipment is known as Auto Humidity Chamber, Humidity Chambers, Standard Temperature Humidity Chamber, Plastic Lab Humidity Chamber, Humidity dry chamber, Humidity Calibration Chambers, etc.  

system status- Digital Model orientation- Vertical Temperature controller- Micro processor based double display PID controller Cooling- Through specially designed high efficient cooling system Air circulation- Through blower fitted at the back side Temperature range- Ambient to 80.0°C Temperature least count- 0.1°C Accuracy- ± 0.5°C Timer- Micro processor based double display digital timer (Optional) Timer range- 999.9 Seconds, Minutes or Hours

      Introduction Double Walled Inner SS - Outer GI 3" Gap Puf/Glass Wool Insulation Full length inner polycarbonate or acrylic door for clear inner view Outer metal door with Magnetic Gasket & Lock Forced air circulation for uniform temperature throughout the chamber Dual preset electronic Digital Temperature Controller Cum Indicator Temperature Range : 5°C above ambient to 70°C ± 1°C Humidity Range from atmospheric humidity to 92% Rh Controlled by Digital Display Controller (Direct RH Indicator) ± 3% Rh Attractive design and excellent accuracy Thermal validation prior to dispatch Data logging facility with uniquely designed software   (H x W x D)(cm) Volume ( Liters ) No. of Trays 45 X 45 X 45   3 71 X 45 X 45   6 90 X 60 X 60   12      

We have carved a dignified position in the market owing to our on-time and safe delivery of the orders. We are acknowledged for entertaining voluminous orders at a time as we are supported by streamlined inventory management system and capacious storage facility.   Specifications: Our Conditioning chamber is an ideal environmental chamber with the latest technology used to create the designated temperature. It has the lowest heat loss ratio due to a high quality of insulation with imported glass wool. Ergonomics and user ease are given a lot of importance while designing the system. It has complete Digital controls.Viewing: Viewing Glass incorporated for Visual Examination of sample, with neoprene sealed lining