Industrial Refrigeration Equipment Dealers

Product Code: EKE 2400 (B)The unit enables students to study the various parameters affecting the performance of a domestic refrigerator. It consists of refrigeration cycle of domestic refrigerator, it consists a hermetically sealed compressor, air-cooled condenser, capillary tube and a natural convection type evaporator. The evaporator is fitted with a small heater to simulate different load conditions various measurements are provided so that power consumption, COP, theoretical and actual refrigerating effects refrigerant flow rate and effect of door opening on power consumption can be studied and also students can visualize automatic operation of unit using a thermostat. Specifications: Compressor - Hermetically sealed, Kirioskar make having capacity of approx. 1/25 ton of refrigeration. Air - cooled condenser with natural convection airflow. Capillary tube of matched length as expansion device. Evaporator coil with an electric heater inside and adequate glass wool insulation on all side. 5.Measurement Energymeter Tore compressor input power measurement. Pressure gauge for condensing and evaporating pressure. Flow meter for liquid refrigerant flow Digital Temperature indicator for measurement of temperature Safety & Controls High & low pressure cutout. Thermostat. Necessary Switches. A technical manual accompanies the unit. Also, the unit is provided with an attractive and rust proof powder coating.Services Required: Floor space of 2m x 1m. 230V AC stabilized supply with earthing connection

We offer Brine Chiller for applications demanding temperatures up to -40 C the use of hermetically sealed compressor and other reputed accessories have eased the achievement of these ultra low temperature, our chiller packages can be integrated with insulated brine storage tank and re-circulating Pump.Applications : Chemical Process Plants Electroplating Laboratory Applications Medical Application Anodizing Special Purpose Machines

We present robustly constructed Ice Bank Tanks-02 that are required for small dairies & chilling centre. Furthermore, our Ice Bank Tanks are manufactured using high grade raw material which is procured from trusted vendor base for ensuring longer service life and high strength. Our Ice Bank Tanks are offered with various features for meeting the expectations of our valued clients. We provide our Ice Bank Tanks at market leading prices. Our IBT Systems are used for milk processing in small and medium dairies up to 15,000 litres of milk per day and also for chilling centre for handling up to 20,000 litres of milk per day. Our Air Cooled IBT Systems are skid units ( One Piece) and are fully tested and can be commissioned with in 2 days time on site. The IBT Units are provided with lifting hooks and can be handled easily with cranes. Specialty Robust constructionHigh performanceAvailable in different capacitiesEasy handling Capacity Range 1,000 Lts Per Day20,000 Lts Per Day Our Ice Bank Tanks are available with Inner Tank Mild Steel OR Stainless SteelOuter M.S. , G.I. with Epoxy Paint OR Stainless Steel

Special -80oC batch type freezing machine, for automobile gear shrinking purpose, which otherwise may be liquid nitrogen cooled for contraction of gears so that the gearbox assembly can be done. Against freezing and assembling, the heating – expanding and assembling is a very old method and results in change in the properties of the material.Specialized refrigeration cum heating unit for BARC equipped with glass doors for complete visibility of the samples incubating inside.

CHOICE OF SCREW COMPRESSOR of Hanbell (Taiwan), Bitzer (Germany) & J&E Hall (UK). All options are semi-hermetic in construction, thereby making it maintenance friendly. The screw compressor range offered is specifically developed for low temperature chillers applications and is offered along with adjustable volume ratio. Besides internally built oil separation system, check valves at suction and discharge port are provided as standard part of the OEM equipment. The screw compressor range offered is specifically designed by the respective OEMs for low temperature applications. HIGH COP/EER High cop/eer as an issue proficient gathering of the refrigerant. These water cooled chiller units are intended to meet the relevant necessities of ASHRAE/ANSI 15 Safety Code. Since the condensers are liberally oversized, productive gathering of the refrigerant prompts lower IKW contrasted and other accessible brands. SHELL & TUBE EVAPORATOR Shell & tube evaporator is constructed with copper containers of 19 SWG that empowers them to withstand hard water with PH more noteworthy than 8. The copper tubes contain Flamingo licensed star turbulator embeds that give turbulence to the refrigerant coursing through the copper tubes. As an issue of this turbulence these Shell & Tube evaporators have amazingly effective hotness exchange rate. The shell is produced from high-review steel. The evaporator is planned according to ASME Section VIII Div.1. AVAILABLE IN A CHOICE OF REFRIGERANTS Available in a choice of refrigerants R-22 (Freon), R-407c and R-134a. Both R-407c and R-134a are environment neighborly and non-ozone draining refrigerants. ULTRA EFFICIENT CONDENSING Ultra efficient condensing using outer finned copper tubes for increasing heat transfer surface results in higher efficiencyin comparison to copper tubes without finning. The copper tubes are of 16 SWG and are finned on the outer surface to accommodate up to 26 fins per inch. The copper tubes are mechanically expanded through a torque controlled machine on the tube sheets that are manufactured on imported VMC machine. ECONOMIZER FOR HIGHER EFFICIENCY Economizer for higher efficiency is provided as per refrigerant used and depending upon the liquid temperature range desired. Economiser is provided as standard part of supply in process chillers opted for evaporating temperature of 0 deg. C or lower. The economizer/sub-cooler enhances the overall capacity of the chiller by 10%, and reduces the power consumption, thereby increasing the overall Coefficient of Performance (COP). AVAILABLE IN A CHOICE OF REFRIGERANTS Available in a choice of refrigerants R-22 (Freon), R-407C and R-134a. Both R-407C and R-134A are environment friendly and non-ozone depleting refrigerants.   ADDITONAL AIR COOLED TYPE OIL COOLER Additonal air cooled type oil cooler is added depending upon the refrigerant used and the chilled water/brine temperature desired. The oil cooler helps maintain the oil temperatures flowing through the compressor within safe limits. The oil cooler fan is automatically controlled depending upon the oil temperature. This feature enhances the screw compressor life. LIQUID INJECTION Liquid injection is a standard gimmick and is utilized to cool the compressor engine slowing down. When the release temperature surpasses the ordinary range, an electric solenoid curl infuses fluid refrigerant to keep the slowing down inside protected breaking points. This peculiarity upgrades the life of the screw compressor. THERMOSTATIC EXPANSION VALVE Thermostatic expansion valve is given as an issue some piece of the water cooled screw chiller gear. Electronic extension valve can likewise be alternatively given. CONTROL PANEL Control panel with IP-65 assurance is given as standard piece of the water cooled supplies. MICROPROCESSOR BASED CONTROLLER Microprocessor based controller is a standard piece of the water cooled screw chiller supplies. The controller permits various set focuses that can be arranged to specific set of values that may be considered inside the safe working extent. If there should be an occurrence of any rupture in any of the set point esteem the controller will excursion the chiller after the fed wellbeing postponement period has passed and show it on the LCD show. Additionally, the controller naturally conforms the limit in a stepped configuration making them perfect for variable burden applications.

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial
• Weight: 100-1000kg
• Feature: Durable, Easy To Use, Effective, High Demand
• Voltage: 220V
• Condition: New
• Finishing: Polished
• Automatic Grade: Automatic
• Power: 1-3kw
• Brand Name: Active
• Power: 10 kW
• Ambient Temperature: Up to 480 Degree Celsius
• Cooling Capacity: 100 TR

• Warranty: 6 Months
• Condition: New
• Application: Industrial
• Features: Effective, Widely used, Affordable
• Maintenance: Low
• Finish: Polished
• Resistivity: Corrosion & Chemical resistant
• Durability: Long Life