Industrial Water Softener Dealers

Industrial Water Softener is used to remove hardness salts like Ca, Mg, salts of carbonate, sulphate & hydroxides from water. We are established with the vision to create a new benchmark of excellence in manufacturing and supplying Commercial Water Softener in Howrah, West Bengal. Our Water Softener works on resin based technology for water softening, as it is a bit reasonable in terms of cost. We create Water Treatment Softener in accordance with the diverse demands of buyers.

We offer a wide range of Water Softeners that are developed in a way to remove the hardness imparting impurities from water i.e., Ca and Mg into non hardness form i.e., Na. We use different media for softening water such as zeolite, lime soda and resin. The commonly used softening med is Sodium Based strong Acid Cation Resin. The entire range of water softening equipment can also be customized as specified by the clients. WTE is offering a wide range of Water Softeners to separate hardness producing ions i.e. calcium and magnesium from water sophistically with very Low trouble shooting cost. Softener systems are equipped with proven technique for the regeneration flow which can minimize the maintance cost. Our Water Softeners are available at a very cost ­competitive rate for the clients.

We offer wide range of industrial water softener including various standard and customized systems. The ion exchange water softener is the most common tool used in the removal of scale-forming calcium and magnesium ions (known as temporary hardness) from hard water. In many cases, a water softener can also be used to remove ferrous (soluble) iron from a supply.

Hydrophilic cationic softener with good surface smoothness. Turbosoft® CS Conc is a cationic softener for textiles that offers a smooth waxy handle to cotton and its blends. Turbosoft® CS Conc can be applied by exhaust as well as pad methods, in mildly acidic conditions (pH : 4.50) at room temperatures.  

Bluebird Pure's commercial water softener is made up of FRP vessel which ensures the longevity and keeps the vessel corrosion free. Bluebird Pure's commercial water softener works on ion exchange process. It has a multi port vessel and uses high quality blue ion-resin and it works up to 1200 ppm hardness level. It is majorly used in big housing societies, textile industries, swimming pools, sugar industries etc. It works at maximum operating pressure of 3.5 bar. Bluebird Pure's commercial water softener has capacity to soften 9000 liter to 60000 liter water per hour upto 200 ppm hardness.

Canadian Clear ranges of softeners are from standard packaged- type-skid mounted and large custom build installation. Units are available manually controlled or semi or fully automatic. Canadian Clear softeners are suitable for treating water for low and medium pressure boilers are well as for process use. The units are perfectly engineered to ensure trouble free and long lasting service with minimum operating and maintenance cost.

Industrial water softeners, manufactured by us offer long years of reliable performance at very low investment price. Available with manual, semi-automatic or fully automatic controls, these units are constructed as portable systems; skid mounted packaged treatment plants or large custom built units. To meet the needs of specific applications, our hard water softeners are available with wide range of configurations including piping quality, tank construction, single, double and triple unit arrangements etc.

We Design and Supply Industrial Water Softeners where calcium, magnesium ions are exchanged for sodium ions. These are manually and automatically operated and designed to suit the requirement of process water in industries such as textile mills, beverage manufacture, laundry and air conditioning plants, boiler feed etc.

Our “AFI – Softeners – ISU” and “ISD” series industrial softeners are designed for longer operating cycles and low regeneration cost. The system incorporates the process technique of counter current flow regeneration and co-flow regeneration. Our standard plants ranges from 12 m3hr to 150 m3hr this systems are made from mild steel pressure vessels and mild steel pipes.

We are Manufacturer, Supplier, Exporter of Industrial / WTP Water Softener Systems / Ion Exchange Systems and our setup is situated in Pune, Maharashtra, India. We are also Services Provider of above products in Mumbai, Nashik, Aurangabad, Kolhapur, Sangli, Satara, Raigad, Maharashtra, Gujrat and Karanataka, India About Industrial / WTP Water Softener Systems / Ion Exchange Systems Bluemaarlin's has been leasding name in Industrial Water softners. The principle of ion exchange is at the core of water softening, a process essential for mitigating the adverse effects of hard water on industrial equipment. Softner Water is used to prevent scaling in Boiler and Industrial Metal Pipes. Inside a water softener, a resin bed composed of tiny resin beads serves as the key player in this ion exchange process. The resin beads are coated with sodium ions. As hard water flows through the resin bed, the calcium and magnesium ions in the water are attracted to the resin beads, displacing the sodium ions. The calcium and magnesium ions then adhere to the resin beads, effectively removing them from the water. This exchange transforms hard water into soft water, characterized by a reduced concentration of calcium and magnesium ions. Periodically, the water softener undergoes a regeneration process where a brine solution rich in sodium ions is flushed through the resin bed. The high concentration of sodium in the brine displaces the accumulated calcium and magnesium ions on the resin beads, rejuvenating the resin bed for another cycle of ion exchange. Bluemaarlin is capavble of providing Water softner form 1000 LPH upto 10 MLD . Bluemaarlins water softner are working realibly and efficiently for many years in Sugar, Pharma, Automobile Industries. Big Distallaries in India also are using Bluemaarlins Water Softners

Softening is the most commonly used method of removing hardness that is calcium and magnesium from water and render the water suitable for boiler feed, textile processing, cooling towers, and utility purpose.

Our company is offering a wide range of industrial water softeners to separate hardness producing ions, calcium and magnesium and other impurities from water sophistically. Our softeners are primarily used to produce contaminant-free water by highly acidic caption exchanger. Its systems are equipped with proven technique for the regeneration flow of water for medium scale industries as well as commercial use. Our water softeners are available at a very cost-competitive rate for the clients.

A water softener reduces the calcium, magnesium and to some degree manganese and ferrous iron ion concentration in hard water The water to be treated passes through a bed of the resin. Negatively-charged resins absorb and bind metal ions, which are positively charged The resins initially contain univalent hydrogen, sodium or potassium ions, which exchange with divalent calcium and magnesium ions in the water. This exchange eliminates precipitation and soap scum formation This water softener plants removes all the hard impurities from water and makes it soft and usable. We prepare softener as per your requirement.

Aeolus is now introducing the next generation of this new and highly effective scale protection system, the xeroscale technology. for boiler & hot water industrial applications, water jets, 1)improves boiler efficiency 2)reduces blow down frequency by 20-30% 3)saves energy thereby saves money 4)old & existing scale is removed in the form of paste via blow down 5)no need to use ro & salt

The second variable in the design process is figuring out the daily demand on the system. This is calculated in gallons per minute (GPM), gallons per day (GPD), and the influent water quality. The vessel size, pipe size, and control valve sizes are all dictated by the daily demand. A good rule of thumb is that each vessel does not regenerate more than once per day. The bed velocities need to be at an acceptable rate to minimize pressure loss and increase bed longevity. Bed velocities can range from being extremely conservative to extremely aggressive. Most designs call for bed velocities of 8 to 12 gallons per minute per square foot of bed surface area.